Support "copied:" lines in :Gstatus

CONTRIBUTING.markdown

@@ -1,18 +0,0 @@
-Before reporting a bug, you should try stripping down your Vim configuration
-and removing other plugins.  The sad truth about VimScript is that it is
-fraught with incompatibilities waiting to happen.  I'm happy to work around
-them where I can, but it's up to you to isolate the conflict.
-
-Fugitive is particularly prone to regressions due to Git version issues,
-platform issues, and interactions with other plugins.  I end up bisecting a
-lot more than other projects, and thus I'm especially meticulous here about
-maintaining a clean, readable, history.  Squash and force push any requested
-changes to a pull request.  And if your [commit message
-sucks](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html),
-I'm not going to accept it.  Period.
-
-Beyond that, don't be shy about asking before patching.  What takes you hours
-might take me minutes simply because I have both domain knowledge and a
-perverse knowledge of VimScript so vast that many would consider it a symptom
-of mental illness.  On the flip side, some ideas I'll reject no matter how
-good the implementation is.  "Send a patch" is an edge case answer in my book.

README.markdown

@@ -1,4 +1,5 @@
-# fugitive.vim
+fugitive.vim
+============
 
 I'm not going to lie to you; fugitive.vim may very well be the best
 Git wrapper of all time.  Check out these features:
@@ -11,13 +12,13 @@ Vim's diff handling capabilities to stage a subset of the file's
 changes.
 
 Bring up the output of `git status` with `:Gstatus`.  Press `-` to
-`add`/`reset` a file's changes, or `p` to `add`/`reset` `--patch`.  And guess
+`add`/`reset` a file's changes, or `p` to `add`/`reset` `--patch` that
-what `:Gcommit` does!
+mofo.  And guess what `:Gcommit` does!
 
 `:Gblame` brings up an interactive vertical split with `git blame`
-output.  Press enter on a line to edit the commit where the line
+output.  Press enter on a line to reblame the file as it stood in that
-changed, or `o` to open it in a split.  When you're done, use `:Gedit`
+commit, or `o` to open that commit in a split.  When you're done, use
-in the historic buffer to go back to the work tree version.
+`:Gedit` in the historic buffer to go back to the work tree version.
 
 `:Gmove` does a `git mv` on a file and simultaneously renames the
 buffer.  `:Gremove` does a `git rm` on a file and simultaneously deletes
@@ -42,32 +43,14 @@ GitHub, `git instaweb` will be spun up instead.
 Add `%{fugitive#statusline()}` to `'statusline'` to get an indicator
 with the current branch in (surprise!) your statusline.
 
-Last but not least, there's `:Git` for running any arbitrary command,
+Oh, and of course there's `:Git` for running any arbitrary command.
-and `Git!` to open the output of a command in a temp file.
 
-## Screencasts
+Like fugitive.vim? Follow the repository on
+[GitHub](http://github.com/tpope/vim-fugitive) and vote for it on
+[vim.org](http://www.vim.org/scripts/script.php?script_id=2975).
 
-* [A complement to command line git](http://vimcasts.org/e/31)
+FAQ
-* [Working with the git index](http://vimcasts.org/e/32)
+---
-* [Resolving merge conflicts with vimdiff](http://vimcasts.org/e/33)
-* [Browsing the git object database](http://vimcasts.org/e/34)
-* [Exploring the history of a git repository](http://vimcasts.org/e/35)
-
-## Installation
-
-If you don't have a preferred installation method, one option is to install
-[pathogen.vim](https://github.com/tpope/vim-pathogen), and then copy
-and paste:
-
-    cd ~/.vim/bundle
-    git clone git://github.com/tpope/vim-fugitive.git
-    vim -u NONE -c "helptags vim-fugitive/doc" -c q
-
-If your Vim version is below 7.2, I recommend also installing
-[vim-git](https://github.com/tpope/vim-git) for syntax highlighting and
-other Git niceties.
-
-## FAQ
 
 > I installed the plugin and started Vim.  Why don't any of the commands
 > exist?
@@ -80,39 +63,8 @@ directory.  Edit a file from the repository.
 Fugitive cares about the current file, not the current working
 directory.  Edit a file from the repository.
 
-> Why is `:Gbrowse` not using the right browser?
+> I changed the current working directory.  Why do all the commands use
+> the old directory?
 
-`:Gbrowse` delegates to `git web--browse`, which is less than perfect
+Fugitive cares about the current file, not the current working
-when it comes to finding the right browser.  You can tell it the correct
+directory.  Edit a file from the repository.
-browser to use with `git config --global web.browser ...`.  On OS X, for
-example, you might want to set this to `open`.  See `git web--browse --help`
-for details.
-
-> Here's a patch that automatically opens the quickfix window after
-> `:Ggrep`.
-
-This is a great example of why I recommend asking before patching.
-There are valid arguments to be made both for and against automatically
-opening the quickfix window.  Whenever I have to make an arbitrary
-decision like this, I ask what Vim would do.  And Vim does not open a
-quickfix window after `:grep`.
-
-Luckily, it's easy to implement the desired behavior without changing
-fugitive.vim.  The following autocommand will cause the quickfix window
-to open after any grep invocation:
-
-    autocmd QuickFixCmdPost *grep* cwindow
-
-## Self-Promotion
-
-Like fugitive.vim? Follow the repository on
-[GitHub](https://github.com/tpope/vim-fugitive) and vote for it on
-[vim.org](http://www.vim.org/scripts/script.php?script_id=2975).  And if
-you're feeling especially charitable, follow [tpope](http://tpo.pe/) on
-[Twitter](http://twitter.com/tpope) and
-[GitHub](https://github.com/tpope).
-
-## License
-
-Copyright (c) Tim Pope.  Distributed under the same terms as Vim itself.
-See `:help license`.

doc/fugitive.txt

@@ -1,14 +1,38 @@
 *fugitive.txt*  A Git wrapper so awesome, it should be illegal
 
-Author:  Tim Pope <http://tpo.pe/>
+Author:  Tim Pope <vimNOSPAM@tpope.org>         *fugitive-author*
 License: Same terms as Vim itself (see |license|)
 
 This plugin is only available if 'compatible' is not set.
 
 INTRODUCTION                                    *fugitive*
 
-Whenever you edit a file from a Git repository, a set of commands is defined
+Install in ~/.vim, or in ~\vimfiles if you're on Windows and feeling lucky.
-that serve as a gateway to Git.
+Vim 7.2 is recommended as it ships with syntax highlighting for many Git file
+types.
+
+If you're in a hurry to get started, here are some things to try:
+
+In any file in your repository, run |:Gedit| HEAD.  Press <CR> to jump to the
+current branch.  Press <CR> again to jump to the top most commit.  Keep using
+<CR> to explore parent commits, trees, and blobs.  Use C in a tree or blob to
+get back to the commit.
+
+Edit a file in the work tree and make some changes.  Use |:Gdiff| to open up
+the indexed version.  Use |do| and |dp| on various hunks to bring the files in
+sync, or use |:Gread| to pull in all changes.  Write the indexed version to
+stage the file.
+
+Run |:Gstatus| to check your repository's status.  Use "-" to stage and reset
+files and "p" to add/reset --patch them.  Invoke |:Gcommit| to commit your
+changes.
+
+Run |:Gblame| in a work tree file to see a blame in a vertical split.  Press
+<CR> on any line to reopen and reblame that file as it stood in that commit.
+Press o or O on any line to inspect that commit in a split or a tab.
+
+Run |:Ggrep| to search the work tree or history.  Run |:Gmove| to rename a
+file.  Run |:Gremove| to delete a file.
 
 COMMANDS                                        *fugitive-commands*
 
@@ -19,10 +43,6 @@ that are part of Git repositories).
 :Git [args]             Run an arbitrary git command. Similar to :!git [args]
                         but chdir to the repository tree first.
 
-                                                *fugitive-:Git!*
-:Git! [args]            Like |:Git|, but capture the output into a temp file,
-                        and edit that temp file.
-
                                                 *fugitive-:Gcd*
 :Gcd [directory]        |:cd| relative to the repository.
 
@@ -31,87 +51,37 @@ that are part of Git repositories).
 
                                                 *fugitive-:Gstatus*
 :Gstatus                Bring up the output of git-status in the preview
-                        window.  The following maps, which work on the cursor
+                        window.  In addition to standard motions, you can
-                        line file where sensible, are provided:
+                        use <C-N> and <C-P> to jump from filename to
-
+                        filename.  Press C to invoke |:Gcommit|.  Press D to
-                        g?    show this help
+                        |:Gdiff| the file on the cursor line, or ds to
-                        <C-N> next file
+                        |:Gsdiff|.  Press - to stage or unstage the file on
-                        <C-P> previous file
+                        the cursor line.  Press p to do so on a per hunk basis
-                        <CR>  |:Gedit|
+                        (--patch).  All of D, -, and p have a different,
-                        -     |:Git| add
+                        sensible (and hopefully intuitive) behavior when
-                        -     |:Git| reset (staged files)
+                        invoked on a heading rather than a file name.
-                        cA    |:Gcommit| --amend --reuse-message=HEAD
-                        ca    |:Gcommit| --amend
-                        cc    |:Gcommit|
-                        cva   |:Gcommit| --amend --verbose
-                        cvc   |:Gcommit| --verbose
-                        D     |:Gdiff|
-                        ds    |:Gsdiff|
-                        dp    |:Git!| diff (p for patch; use :Gw to apply)
-                        dp    |:Git| add --intent-to-add (untracked files)
-                        dv    |:Gvdiff|
-                        O     |:Gtabedit|
-                        o     |:Gsplit|
-                        p     |:Git| add --patch
-                        p     |:Git| reset --patch (staged files)
-                        q     close status
-                        r     reload status
-                        S     |:Gvsplit|
 
                                                 *fugitive-:Gcommit*
 :Gcommit [args]         A wrapper around git-commit.  If there is nothing
                         to commit, |:Gstatus| is called instead.  Unless the
                         arguments given would skip the invocation of an editor
                         (e.g., -m), a split window will be used to obtain a
-                        commit message, or a new tab if -v is given.  Write
+                        commit message.  Write and close that window (:wq or
-                        and close that window (:wq or |:Gwrite|) to finish the
+                        |:Gwrite|) to finish the commit.  Unlike when running
-                        commit.  Unlike when running the actual git-commit
+                        the actual git-commit command, it is possible (but
-                        command, it is possible (but unadvisable) to alter the
+                        unadvisable) to muck with the index with commands like
-                        index with commands like git-add and git-reset while a
+                        git-add and git-reset while a commit message is
-                        commit message is pending.
+                        pending.
-
-                                                *fugitive-:Gmerge*
-:Gmerge [args]          Calls git-merge and loads errors and conflicted files
-                        into the quickfix list.  Opens a |:Gcommit| style
-                        split window for the commit message if the merge
-                        succeeds.  If called during a merge conflict, the
-                        conflicted files from the current index are loaded
-                        into the quickfix list.
-
-                                                *fugitive-:Gpull*
-:Gpull [args]           Like |:Gmerge|, but for git-pull.
-
-                                                *fugitive-:Gpush*
-:Gpush [args]           Invoke git-push, load the results into the quickfix
-                        list, and invoke |:cwindow| to reveal any errors.
-                        |:Dispatch| is used if available for asynchronous
-                        invocation.
-
-                                                *fugitive-:Gfetch*
-:Gfetch [args]          Like |:Gpush|, but for git-fetch.
 
                                                 *fugitive-:Ggrep*
 :Ggrep [args]           |:grep| with git-grep as 'grepprg'.
 
-                                                *fugitive-:Glgrep*
-:Glgrep [args]          |:lgrep| with git-grep as 'grepprg'.
-
                                                 *fugitive-:Glog*
 :Glog [args]            Load all previous revisions of the current file into
                         the quickfix list.  Additional git-log arguments can
                         be given (for example, --reverse).  If "--" appears as
                         an argument, no file specific filtering is done, and
-                        previous commits rather than previous file revisions
+                        commits are loaded into the quickfix list.
-                        are loaded.
-
-:{range}Glog [args]     Use git-log -L to load previous revisions of the given
-                        range of the current file into the quickfix list.  The
-                        cursor is positioned on the first line of the first
-                        diff hunk for each commit.
-
-                                                *fugitive-:Gllog*
-:Gllog [args]           Like |:Glog|, but use the location list instead of the
-                        quickfix list.
 
                                         *fugitive-:Gedit* *fugitive-:Ge*
 :Gedit [revision]       |:edit| a |fugitive-revision|.
@@ -123,15 +93,10 @@ that are part of Git repositories).
 :Gvsplit [revision]     |:vsplit| a |fugitive-revision|.
 
                                                 *fugitive-:Gtabedit*
-:Gtabedit [revision]    |:tabedit| a |fugitive-revision|.
+:Gtabedit [revision]    |:tabedit| a |fugitive-revision|
 
                                                 *fugitive-:Gpedit*
-:Gpedit [revision]      |:pedit| a |fugitive-revision|.
+:Gpedit [revision]      |:pedit| a |fugitive-revision|
-
-:Gsplit! [args]                 *fugitive-:Gsplit!* *fugitive-:Gvsplit!*
-:Gvsplit! [args]                *fugitive-:Gtabedit!* *fugitive-:Gpedit!*
-:Gtabedit! [args]       Like |:Git!|, but open the resulting temp file in a
-:Gpedit! [args]         split, tab, or preview window.
 
                                                 *fugitive-:Gread*
 :Gread [revision]       Empty the buffer and |:read| a |fugitive-revision|.
@@ -142,13 +107,7 @@ that are part of Git repositories).
 :{range}Gread [revision]
                         |:read| in a |fugitive-revision| after {range}.
 
-                                                *fugitive-:Gread!*
+                                                *fugitive-:Gwrite*
-:Gread! [args]          Empty the buffer and |:read| the output of a Git
-                        command.  For example, :Gread! show HEAD:%.
-
-:{range}Gread! [args]  |:read| the output of a Git command after {range}.
-
-                                        *fugitive-:Gw* *fugitive-:Gwrite*
 :Gwrite                 Write to the current file's path and stage the results.
                         When run in a work tree file, it is effectively git
                         add.  Elsewhere, it is effectively git-checkout.  A
@@ -174,16 +133,14 @@ that are part of Git repositories).
                         index is used (which means a three-way diff during a
                         merge conflict, making it a git-mergetool
                         alternative).  The newer of the two files is placed
-                        to the right or bottom, depending on 'diffopt' and
+                        to the right.  Use |do| and |dp| and write to the
-                        the width of the window relative to 'textwidth'.  Use
+                        index file to simulate "git add --patch".
-                        |do| and |dp| and write to the index file to simulate
-                        "git add --patch".
 
                                                 *fugitive-:Gsdiff*
-:Gsdiff [revision]      Like |:Gdiff|, but always split horizontally.
+:Gsdiff [revision]      Like |:Gdiff|, but split horizontally.
 
                                                 *fugitive-:Gvdiff*
-:Gvdiff [revision]      Like |:Gdiff|, but always split vertically.
+:Gvdiff [revision]      Identical to |:Gdiff|.  For symmetry with |:Gsdiff|.
 
                                                 *fugitive-:Gmove*
 :Gmove {destination}    Wrapper around git-mv that renames the buffer
@@ -199,23 +156,10 @@ that are part of Git repositories).
 
                                                 *fugitive-:Gblame*
 :Gblame [flags]         Run git-blame on the file and open the results in a
-                        scroll bound vertical split.  You can give any of
+                        scroll bound vertical split.  Press enter on a line to
-                        ltfnsewMC as flags and they will be passed along to
+                        reblame the file as it was in that commit.  You can
-                        git-blame.  The following maps, which work on the
+                        give any of ltwfsMC as flags and they will be passed
-                        cursor line commit where sensible, are provided:
+                        along to git-blame.
-
-                        g?    show this help
-                        A     resize to end of author column
-                        C     resize to end of commit column
-                        D     resize to end of date/time column
-                        q     close blame and return to blamed window
-                        gq    q, then |:Gedit| to return to work tree version
-                        <CR>  q, then open commit
-                        o     open commit in horizontal split
-                        O     open commit in new tab
-                        -     reblame at commit
-                        ~     reblame at [count]th first grandparent
-                        P     reblame at [count]th parent (like HEAD^[count])
 
 :[range]Gblame [flags]  Run git-blame on the given range.
 
@@ -228,11 +172,6 @@ that are part of Git repositories).
                         "git instaweb" from a terminal).  If a range is given,
                         it is appropriately appended to the URL as an anchor.
 
-                        To use with GitHub FI, point g:fugitive_github_domains
-                        at a list of domains:
->
-                        let g:fugitive_github_domains = ['https://example.com']
-~
 :[range]Gbrowse!        Like :Gbrowse, but put the URL on the clipboard rather
                         than opening it.
 
@@ -248,16 +187,6 @@ that are part of Git repositories).
 
 MAPPINGS                                        *fugitive-mappings*
 
-These maps are available everywhere.
-
-                                                *fugitive-c_CTRL-R_CTRL-G*
-<C-R><C-G>              On the command line, recall the path to the current
-                        object (that is, a representation of the object
-                        recognized by |:Gedit|).
-
-                                                *fugitive-y_CTRL-G*
-["x]y<C-G>              Yank the commit SHA and path to the current object.
-
 These maps are available in Git objects.
 
                                                 *fugitive-<CR>*
@@ -266,16 +195,9 @@ These maps are available in Git objects.
                                                 *fugitive-o*
 o                       Jump to the revision under the cursor in a new split.
 
-                                                *fugitive-S*
-S                       Jump to the revision under the cursor in a new
-                        vertical split.
-
                                                 *fugitive-O*
 O                       Jump to the revision under the cursor in a new tab.
 
-                                                *fugitive--*
--                       Go to the tree containing the current tree or blob.
-
                                                 *fugitive-~*
 ~                       Go to the current file in the [count]th first
                         ancestor.
@@ -286,10 +208,6 @@ P                       Go to the current file in the [count]th parent.
                                                 *fugitive-C*
 C                       Go to the commit containing the current file.
 
-                                                *fugitive-.*
-.                       Start a |:| command line with the current revision
-                        prepopulated at the end of the line.
-
                                                 *fugitive-a*
 a                       Show the current tag, commit, or tree in an alternate
                         format.
@@ -330,12 +248,6 @@ a statusline, this one matches the default when 'ruler' is set:
 >
     set statusline=%<%f\ %h%m%r%{fugitive#statusline()}%=%-14.(%l,%c%V%)\ %P
 <
-                                                *fugitive#head(...)*
-Use fugitive#head() to return the name of the current branch. If the current
-HEAD is detached, fugitive#head() will return the empty string, unless the
-optional argument is given, in which case the hash of the current commit will
-be truncated to the given number of characters.
-
 ABOUT                                           *fugitive-about*
 
 Grab the latest version or report a bug on GitHub: