Attempt to allow :Gbrowse on HTTP GitHub FI

CONTRIBUTING.markdown

@@ -1,18 +0,0 @@
-Before reporting a bug, you should try stripping down your Vim configuration
-and removing other plugins.  The sad truth about VimScript is that it is
-fraught with incompatibilities waiting to happen.  I'm happy to work around
-them where I can, but it's up to you to isolate the conflict.
-
-Fugitive is particularly prone to regressions due to Git version issues,
-platform issues, and interactions with other plugins.  I end up bisecting a
-lot more than other projects, and thus I'm especially meticulous here about
-maintaining a clean, readable, history.  Squash and force push any requested
-changes to a pull request.  And if your [commit message
-sucks](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html),
-I'm not going to accept it.  Period.
-
-Beyond that, don't be shy about asking before patching.  What takes you hours
-might take me minutes simply because I have both domain knowledge and a
-perverse knowledge of VimScript so vast that many would consider it a symptom
-of mental illness.  On the flip side, some ideas I'll reject no matter how
-good the implementation is.  "Send a patch" is an edge case answer in my book.

README.markdown

@@ -1,4 +1,5 @@
-# fugitive.vim
+fugitive.vim
+============
 
 I'm not going to lie to you; fugitive.vim may very well be the best
 Git wrapper of all time.  Check out these features:
@@ -11,13 +12,13 @@ Vim's diff handling capabilities to stage a subset of the file's
 changes.
 
 Bring up the output of `git status` with `:Gstatus`.  Press `-` to
-`add`/`reset` a file's changes, or `p` to `add`/`reset` `--patch`.  And guess
+`add`/`reset` a file's changes, or `p` to `add`/`reset` `--patch` that
-what `:Gcommit` does!
+mofo.  And guess what `:Gcommit` does!
 
 `:Gblame` brings up an interactive vertical split with `git blame`
-output.  Press enter on a line to edit the commit where the line
+output.  Press enter on a line to reblame the file as it stood in that
-changed, or `o` to open it in a split.  When you're done, use `:Gedit`
+commit, or `o` to open that commit in a split.  When you're done, use
-in the historic buffer to go back to the work tree version.
+`:Gedit` in the historic buffer to go back to the work tree version.
 
 `:Gmove` does a `git mv` on a file and simultaneously renames the
 buffer.  `:Gremove` does a `git rm` on a file and simultaneously deletes
@@ -45,7 +46,8 @@ with the current branch in (surprise!) your statusline.
 Last but not least, there's `:Git` for running any arbitrary command,
 and `Git!` to open the output of a command in a temp file.
 
-## Screencasts
+Screencasts
+-----------
 
 * [A complement to command line git](http://vimcasts.org/e/31)
 * [Working with the git index](http://vimcasts.org/e/32)
@@ -53,21 +55,25 @@ and `Git!` to open the output of a command in a temp file.
 * [Browsing the git object database](http://vimcasts.org/e/34)
 * [Exploring the history of a git repository](http://vimcasts.org/e/35)
 
-## Installation
+Installation
+------------
 
-If you don't have a preferred installation method, one option is to install
+If you don't have a preferred installation method, I recommend
-[pathogen.vim](https://github.com/tpope/vim-pathogen), and then copy
+installing [pathogen.vim](https://github.com/tpope/vim-pathogen), and
-and paste:
+then simply copy and paste:
 
     cd ~/.vim/bundle
     git clone git://github.com/tpope/vim-fugitive.git
-    vim -u NONE -c "helptags vim-fugitive/doc" -c q
+
+Once help tags have been generated, you can view the manual with
+`:help fugitive`.
 
 If your Vim version is below 7.2, I recommend also installing
 [vim-git](https://github.com/tpope/vim-git) for syntax highlighting and
 other Git niceties.
 
-## FAQ
+FAQ
+---
 
 > I installed the plugin and started Vim.  Why don't any of the commands
 > exist?
@@ -103,7 +109,32 @@ to open after any grep invocation:
 
     autocmd QuickFixCmdPost *grep* cwindow
 
-## Self-Promotion
+Contributing
+------------
+
+Before reporting a bug, you should try stripping down your Vim
+configuration and removing other plugins.  The sad nature of VimScript
+is that it is fraught with incompatibilities waiting to happen.  I'm
+happy to work around them where I can, but it's up to you to isolate
+the conflict.
+
+If your [commit message sucks](http://stopwritingramblingcommitmessages.com/),
+I'm not going to accept your pull request.  I've explained very politely
+dozens of times that
+[my general guidelines](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html)
+are absolute rules on my own repositories, so I may lack the energy to
+explain it to you yet another time.  And please, if I ask you to change
+something, `git commit --amend`.
+
+Beyond that, don't be shy about asking before patching.  What takes you
+hours might take me minutes simply because I have both domain knowledge
+and a perverse knowledge of VimScript so vast that many would consider
+it a symptom of mental illness.  On the flip side, some ideas I'll
+reject no matter how good the implementation is.  "Send a patch" is an
+edge case answer in my book.
+
+Self-Promotion
+--------------
 
 Like fugitive.vim? Follow the repository on
 [GitHub](https://github.com/tpope/vim-fugitive) and vote for it on
@@ -112,7 +143,8 @@ you're feeling especially charitable, follow [tpope](http://tpo.pe/) on
 [Twitter](http://twitter.com/tpope) and
 [GitHub](https://github.com/tpope).
 
-## License
+License
+-------
 
 Copyright (c) Tim Pope.  Distributed under the same terms as Vim itself.
 See `:help license`.

doc/fugitive.txt

@@ -34,7 +34,6 @@ that are part of Git repositories).
                         window.  The following maps, which work on the cursor
                         line file where sensible, are provided:
 
-                        g?    show this help
                         <C-N> next file
                         <C-P> previous file
                         <CR>  |:Gedit|
@@ -55,7 +54,7 @@ that are part of Git repositories).
                         p     |:Git| add --patch
                         p     |:Git| reset --patch (staged files)
                         q     close status
-                        r     reload status
+                        R     reload status
                         S     |:Gvsplit|
 
                                                 *fugitive-:Gcommit*
@@ -63,32 +62,12 @@ that are part of Git repositories).
                         to commit, |:Gstatus| is called instead.  Unless the
                         arguments given would skip the invocation of an editor
                         (e.g., -m), a split window will be used to obtain a
-                        commit message, or a new tab if -v is given.  Write
+                        commit message.  Write and close that window (:wq or
-                        and close that window (:wq or |:Gwrite|) to finish the
+                        |:Gwrite|) to finish the commit.  Unlike when running
-                        commit.  Unlike when running the actual git-commit
+                        the actual git-commit command, it is possible (but
-                        command, it is possible (but unadvisable) to alter the
+                        unadvisable) to muck with the index with commands like
-                        index with commands like git-add and git-reset while a
+                        git-add and git-reset while a commit message is
-                        commit message is pending.
+                        pending.
-
-                                                *fugitive-:Gmerge*
-:Gmerge [args]          Calls git-merge and loads errors and conflicted files
-                        into the quickfix list.  Opens a |:Gcommit| style
-                        split window for the commit message if the merge
-                        succeeds.  If called during a merge conflict, the
-                        conflicted files from the current index are loaded
-                        into the quickfix list.
-
-                                                *fugitive-:Gpull*
-:Gpull [args]           Like |:Gmerge|, but for git-pull.
-
-                                                *fugitive-:Gpush*
-:Gpush [args]           Invoke git-push, load the results into the quickfix
-                        list, and invoke |:cwindow| to reveal any errors.
-                        |:Dispatch| is used if available for asynchronous
-                        invocation.
-
-                                                *fugitive-:Gfetch*
-:Gfetch [args]          Like |:Gpush|, but for git-fetch.
 
                                                 *fugitive-:Ggrep*
 :Ggrep [args]           |:grep| with git-grep as 'grepprg'.
@@ -104,11 +83,6 @@ that are part of Git repositories).
                         previous commits rather than previous file revisions
                         are loaded.
 
-:{range}Glog [args]     Use git-log -L to load previous revisions of the given
-                        range of the current file into the quickfix list.  The
-                        cursor is positioned on the first line of the first
-                        diff hunk for each commit.
-
                                                 *fugitive-:Gllog*
 :Gllog [args]           Like |:Glog|, but use the location list instead of the
                         quickfix list.
@@ -148,7 +122,7 @@ that are part of Git repositories).
 
 :{range}Gread! [args]  |:read| the output of a Git command after {range}.
 
-                                        *fugitive-:Gw* *fugitive-:Gwrite*
+                                                *fugitive-:Gwrite*
 :Gwrite                 Write to the current file's path and stage the results.
                         When run in a work tree file, it is effectively git
                         add.  Elsewhere, it is effectively git-checkout.  A
@@ -174,16 +148,14 @@ that are part of Git repositories).
                         index is used (which means a three-way diff during a
                         merge conflict, making it a git-mergetool
                         alternative).  The newer of the two files is placed
-                        to the right or bottom, depending on 'diffopt' and
+                        to the right.  Use |do| and |dp| and write to the
-                        the width of the window relative to 'textwidth'.  Use
+                        index file to simulate "git add --patch".
-                        |do| and |dp| and write to the index file to simulate
-                        "git add --patch".
 
                                                 *fugitive-:Gsdiff*
-:Gsdiff [revision]      Like |:Gdiff|, but always split horizontally.
+:Gsdiff [revision]      Like |:Gdiff|, but split horizontally.
 
                                                 *fugitive-:Gvdiff*
-:Gvdiff [revision]      Like |:Gdiff|, but always split vertically.
+:Gvdiff [revision]      Identical to |:Gdiff|.  For symmetry with |:Gsdiff|.
 
                                                 *fugitive-:Gmove*
 :Gmove {destination}    Wrapper around git-mv that renames the buffer
@@ -199,18 +171,18 @@ that are part of Git repositories).
 
                                                 *fugitive-:Gblame*
 :Gblame [flags]         Run git-blame on the file and open the results in a
-                        scroll bound vertical split.  You can give any of
+                        scroll bound vertical split.  Press enter on a line to
-                        ltfnsewMC as flags and they will be passed along to
+                        reblame the file as it was in that commit.  You can
-                        git-blame.  The following maps, which work on the
+                        give any of ltfnsewMC as flags and they will be passed
-                        cursor line commit where sensible, are provided:
+                        along to git-blame.  The following maps, which work on
+                        the cursor line commit where sensible, are provided:
 
-                        g?    show this help
                         A     resize to end of author column
                         C     resize to end of commit column
                         D     resize to end of date/time column
                         q     close blame and return to blamed window
                         gq    q, then |:Gedit| to return to work tree version
-                        <CR>  q, then open commit
+                        i     q, then open commit
                         o     open commit in horizontal split
                         O     open commit in new tab
                         -     reblame at commit
@@ -220,40 +192,32 @@ that are part of Git repositories).
 :[range]Gblame [flags]  Run git-blame on the given range.
 
                                                 *fugitive-:Gbrowse*
-:Gbrowse                Open the current file, blob, tree, commit, or tag
+:[range]Gbrowse         If the remote for the current branch is on GitHub,
-                        in your browser at the upstream hosting provider.
+                        open the current file, blob, tree, commit, or tag
-                        If a range is given, it is appropriately appended to
+                        (with git-web--browse) on GitHub.  Otherwise, open the
-                        the URL as an anchor.
+                        current file, blob, tree, commit, or tag in
+                        git-instaweb (if you have issues, verify you can run
+                        "git instaweb" from a terminal).  If a range is given,
+                        it is appropriately appended to the URL as an anchor.
 
-                        Upstream providers can be added by installing an
+                        To use with GitHub FI, point g:fugitive_github_domains
-                        appropriate Vim plugin.  For example, GitHub can be
+                        at a list of domains:
-                        supported by installing rhubarb.vim, available at
+>
-                        <https://github.com/tpope/vim-rhubarb>.  (Native
+                        let g:fugitive_github_domains = ['git.example.com']
-                        support for GitHub is currently included, but that is
+~
-                        slated to be removed.)
+:[range]Gbrowse!        Like :Gbrowse, but put the URL on the clipboard rather
+                        than opening it.
 
-                        The hosting provider is determined by looking at the
+:[range]Gbrowse {revision}
-                        remote for the current or specified branch and falls
+                        Like :Gbrowse, but for a given |fugitive-revision|.  A
-                        back to "origin".  In the special case of a "."
-                        remote, a local instance of git-instaweb will be
-                        started and used.
-
-:Gbrowse {revision}     Like :Gbrowse, but for a given |fugitive-revision|.  A
                         useful value here is -, which ties the URL to the
                         latest commit rather than a volatile branch.
 
-:Gbrowse [...]@{remote} Force using the given remote rather than the remote
+:[range]Gbrowse [...]@{remote}
+                        Force using the given remote rather than the remote
                         for the current branch.  The remote is used to
                         determine which GitHub repository to link to.
 
-:{range}Gbrowse [args]  Appends an anchor to the URL that emphasizes the
-                        selected lines.  You almost certainly want to give a
-                        "-" argument in this case to force the URL to include
-                        an exact revision.
-
-:[range]Gbrowse! [args] Like :Gbrowse, but put the URL on the clipboard rather
-                        than opening it.
-
 MAPPINGS                                        *fugitive-mappings*
 
 These maps are available everywhere.
@@ -294,10 +258,6 @@ P                       Go to the current file in the [count]th parent.
                                                 *fugitive-C*
 C                       Go to the commit containing the current file.
 
-                                                *fugitive-.*
-.                       Start a |:| command line with the current revision
-                        prepopulated at the end of the line.
-
                                                 *fugitive-a*
 a                       Show the current tag, commit, or tree in an alternate
                         format.