vim-polyglot/doc/julia-vim-L2U.txt

if !exists('g:polyglot_disabled') || index(g:polyglot_disabled, 'julia') == -1

*julia-vim-L2U.txt*  Support for LaTeX-to-Unicode substitutions

Author:  Carlo Baldassi <carlobaldassi@gmail.com>
License: MIT license  {{{
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
    "Software"), to deal in the Software without restriction, including
    without limitation the rights to use, copy, modify, merge, publish,
    distribute, sublicense, and/or sell copies of the Software, and to
    permit persons to whom the Software is furnished to do so, subject to
    the following conditions:
    The above copyright notice and this permission notice shall be included
    in all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
    IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
    CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
    TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
    SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
}}}
CONTENTS					*julia-vim-L2U*

LaTeX-to-Unicode substitutions      |julia-vim-L2U-introdction|
  Via Tab key                       |julia-vim-L2U-tab|
  As you type                       |julia-vim-L2U-as-you-type|
  Via Keymap                        |julia-vim-L2U-keymap|
  On different file types           |julia-vim-L2U-file-types|
  Enabling and disabling            |julia-vim-L2U-enable-disable|
Variables                           |julia-vim-L2U-variables|
Functions                           |julia-vim-L2U-functions|

==============================================================================
LATEX TO UNICODE                              *julia-vim-L2U-introduction*

In the Julia REPL, entering a LaTeX-like sequence such as `\alpha` and pressing
the <Tab> key substitutes it with a Unicode character such as `α`. The Julia
REPL also provides partial completions, and suggestions for possible
completions upon repeated pressing of the <Tab> key. Emojis are also
available, with their names written between colons, e.g. `\:interrobang:`
produces `⁉`.

See |julia-vim-L2U-reference| for the complete table of substitutions.

This Vim plug-in also provides the functionality needed to convert LaTeX
input sequences into Unicode characters. There are 3 different methods
available:

  1. The default one is the most similar to the Julia one: substitutions are
     triggered by pressing the <Tab> key; if a partial match is found a list
     of suggested completions is presented in a menu together with their
     Unicode counterpart. The exact behaviour of this feature can be
     customized, see |julia-vim-L2U-tab|.

  2. The second one substitutes symbols on the fly as you type, but only in
     |Insert| mode. See |julia-vim-L2U-as-you-type|.

  3. The third is based on |keymap|. It also substitutes as-you-type, but it
     doesn't show you the full LaTeX sequence as you're typing it, and there
     is a time-out. Its main advantage over the previous one is that can be
     used in more circumstances, e.g. in |Command-line| mode or when searching
     for a character with |f| or |t|, as explained in |language-mapping|. See
     |julia-vim-L2U-keymap|.

All of these methods are independent and can be used together without issues.

The default configuration is to use the first method, and it's only active
when editing Julia files. It only works in |Insert| and |Command-line| modes.

It is possible to enable it with other file types, see
|julia-vim-L2U-file-types|, and it can be even turned on/off on the fly
regardless of the file type, see |julia-vim-L2U-enable-disable|.

In |Command-line| mode, e.g. when searching with the |/| or |?| commands, the
default behavior is very similar to the default |Insert| mode behavior, but
slightly more limited, see |julia-vim-L2U-cmdmode|.

These features only work as described with Vim version 7.4 or higher. Tab
completion can still be made available on lower Vim versions, see
|julia-vim-L2U-workaround|. The keymap mode might work but it hasn't been
tested.

See |julia-vim| for the general reference about the other features of the
julia-vim plug-in.

------------------------------------------------------------------------------
LATEX TO UNICODE VIA TAB KEY                            *julia-vim-L2U-tab*

Substitution of LaTeX sequences when pressing the <Tab> key (in |Insert| mode or
in |Command-line| modes) is active by default. Use |g:latex_to_unicode_tab| to
control it.

When this feature is active, the julia-vim plug-in creates a mapping for the
<Tab> key (in |Insert| mode) which takes precedence on any previously defined
mapping assigned to it, such that when the <Tab> key is pressed the plug-in
looks for potential LaTeX symbol matches before the cursor, and if it fails to
find anything of interest it will fall-back to the previous mapping for <Tab>
(with default Vim settings, this means it will insert a literal <Tab>; but if
you have defined some other behavior for that key, e.g. by installing another
plug-in such as supertab (https://github.com/ervandew/supertab) than that will
be used).

For example, entering this text in a file:
>
    1 + \alpha
<
and then pressing <Tab>, results in:
>
    1 + α
<

This feature is associated with 'omnifunc' completion, and therefore can
always be accessed via CTRL-X CTRL-O, even when |g:latex_to_unicode_tab| is 0.

A literal <Tab> key can always be entered by using CTRL-V before <Tab> (see
|i_CTRL-V|).

Partial sequence recognition triggers auto-completion (performed as if the
`longest` setting was used in 'completeopt') and shows a menu of suggestions
together with their corresponding Unicode symbol (provided the `menu` setting
is included in 'completeopt', and more then one match is found). So for
example, entering `\al` and pressing <Tab> will result in the following list:
>
    +-------------+
    | \aleph    ℵ |
    | \allequal ≌ |
    | \alpha    α |
    +-------------+
>
Then, pressing `p` will reduce the list to `\alpha`, pressing <Tab> will
complete it and pressing <Tab> again will perform the substitution.

The completion menu can be disbled, and this will happen automatically if a
plug-in which is known to be incompatible with this feature is detected: see
|g:latex_to_unicode_suggestions|.

Some LaTeX sequences can be valid both as they are and as partial matches for
other sequences, e.g. `\ne` is associated with `≠`, but it is also a partial
match for `\nequiv` (`≢`). By default, if <Tab> finds an exact match performs
the substitution, but this can be controlled by the |g:latex_to_unicode_eager|
setting.

Command-line mode                                      *julia-vim-L2U-cmdmode*

In |Command-line| mode, the behavior is largely the same except that both
<Tab> and <S-Tab> are mapped by default, and the functionality is slightly
more limited. No suggestions are shown for partial completions. Pre-existing
user-defined mappings of <Tab> are overridden. In order to avoid that, the
completion can be mapped onto a defferent key combination, see
|g:latex_to_unicode_cmd_mapping|. When using <Tab>, if no matches are found
the behavior falls back to the standard Vim command-line completion.

Vim versions lower than 7.4                     *julia-vim-L2U-workaround*

The <Tab> key remapping is not performed by default with Vim versions lower
than 7.4. However, the functionality is still available via onmicompletion,
which is accessible by the CTRL-X CTRL-O key combination. You can map some
other key combination to this by adding something like
>
  inoremap <C-Tab> <C-X><C-O>
<
in your |.vimrc| file. If you'd map <Tab> directly, then you'd need to use
CTRL-V <Tab> to insert a literal <Tab>.

The settings |g:latex_to_unicode_eager| and |g:latex_to_unicode_suggestions|
are still meaningful in this case.

------------------------------------------------------------------------------
LATEX TO UNICODE AS YOU TYPE                    *julia-vim-L2U-as-you-type*

This feature is disabled by default, see |g:latex_to_unicode_auto|, and it is
only available with Vim version 7.4 or higher. It consists in substituting
valid LaTeX sequences with Unicode symbols automatically as the typing
progresses, as soon as the sequences is unambiguously complete. For example,
when typing:
>
    \chi\^2 = 1
<
The result is
>
    χ² = 1
<
The `\chi` is substituted right when the second backslash is entered, and the
`\^2` is substituted when the following space is entered, before the equal
sign.

This feature does not currently work with emojis.

This feature does not interfere with the <Tab> based substitution.

------------------------------------------------------------------------------
LATEX TO UNICODE VIA KEYMAP                          *julia-vim-L2U-keymap*

This method is somewhat similar to the as-you-type one described above, but it
uses |keymap| to generate the mappings. This has the advantage that it works
in more circumstances, e.g. in |Command-line| mode or when searching within a
line with |f| or |t| (since it uses |language-mapping| underneath). It can
also be easily turned on or off like any other keymap (see |i_CTRL-^| and
|c_CTRL-^|). Like the as-you-type fature, it doesn't work with emojis.
The disadvantage is that you don't see the whole sequence as you're typing
it, and you can't fix mistakes with backspace, for example.
Another difference is that there is a |timeout| like for any other mapping.

In order to use this method, set |g:latex_to_unicode_keymap| to `1`.
You can use it in parallel with the other methods, they don't interfere. For
example, typing a partial sequence and pressing <Tab> still triggers
completions and suggestions if |g:latex_to_unicode_tab| is active.

If you use this feature, it's also useful to set |lCursor|.

------------------------------------------------------------------------------
LATEX TO UNICODE ON DIFFERENT FILE TYPES         *julia-vim-L2U-file-types*

By default, the LaTeX-to-Unicode substitutions are only active when editing
Julia files. However, you can use the variable |g:latex_to_unicode_file_types|
to specify for which file types this feature is active by default. The
variable must be set to a string containing a |pattern| (a regular expression)
which matches the desired file types, or to a list of such patterns. For
example, to activate the feature on all file types by default, you could put
this in your |.vimrc| file:
>
    let g:latex_to_unicode_file_types = ".*"
<
To make it active only on, say, Julia and Lisp files, you could use:
>
    let g:latex_to_unicode_file_types = ["julia", "lisp"]
<

Another option, |g:latex_to_unicode_file_types_blacklist|, can be used to
exclude certain file types. For example, if you'd wish to enable the feature
in all cases except for Python and untyped files, you would use:
>
    let g:latex_to_unicode_file_types = ".*"
    let g:latex_to_unicode_file_types_blacklist = ["python", ""]
<

NOTE: enabling the functionality will override the |'omnifunc'| setting, which
can be undesirable, and interfere with plug-ins for different file types. In
any case, the previous |'omnifunc'| setting is restored when the functionality
is disabled, see |julia-vim-L2U-enable-disable|.

------------------------------------------------------------------------------
ENABLING AND DISABLING LATEX TO UNICODE      *julia-vim-L2U-enable-disable*

The LaTeX-to-Unicode functionality can be enabled or disabled at any time,
regardless of the |'filetype'| of the file you're editing, using the functions
|LaTeXtoUnicode#Enable()|, |LaTeXtoUnicode#Disable()|, |LaTeXtoUnicode#Toggle()|.
For example, you could use a mapping like:
>
    noremap <expr> <F7> LaTeXtoUnicode#Toggle()
    noremap! <expr> <F7> LaTeXtoUnicode#Toggle()
<
and then use the <F7> key to quickly switch the functionality on and off as
needed (see |noremap| and |noremap!|).

NOTE: these functions are different from the variables |g:latex_to_unicode_tab|,
|g:latex_to_unicode_auto| and |g:latex_to_unicode_keymap|: the functions
enable/disable the functionality as a whole, while the variables control
individual features (tab, auto and keymap substitution).

==============================================================================
VARIABLES                                         *julia-vim-L2U-variables*

                                                   *g:latex_to_unicode_tab*
g:latex_to_unicode_tab

                Determines whether to map LaTeX-to-Unicode substitution to the
                <Tab> key while in |Insert| and |Command-line| modes, see
                |julia-vim-L2U-tab|. If unspecified, it is on. You can disable
                the feature by default by inserting the line
>
                    let g:latex_to_unicode_tab = 0
<
                in your |.vimrc| file. You can change this setting at any moment
                while editing, but you need to invoke |LaTeXtoUnicode#Init()|
                for the change to take effect.
                
                                           *g:latex_to_unicode_suggestions*
g:latex_to_unicode_suggestions

                Determines whether the <Tab> key mapping produces suggestions
                for partial matches. By default, this is set to 1 (active),
                unless a plug-in which is known to be incompatible with it is
                detected. Currently, known incompatible plug-ins are
                YouCompleteMe (https://github.com/Valloric/YouCompleteMe),
                neocomplcache (https://github.com/Shougo/neocomplcache.vim),
                neocomplete (https://github.com/Shougo/neocomplete.vim) and
                deoplete (https://github.com/Shougo/deoplete.nvim),

                This variable can be set at any time, changes will immediately
                take effect.
                
                                                 *g:latex_to_unicode_eager*
g:latex_to_unicode_eager

                Determines whether the <Tab> key mapping performs the
                substitution immediately upon finding an exact match. By
                default this setting is set to 1 (active), so that e.g. typing
                `\ne` and pressing the <Tab> key triggers the substitution. If
                this variable is set to 0, an exact match which is also a
                possible partial match to some other sequence triggers the
                suggestions menu first, but another <Tab> forces the
                substitution, so that e.g. typing `\ne` and then <Tab>
                produces a list with `\ne`, `\neg`, `\nequiv` etc., and
                pressing <Tab> again performs the substitution.

                This variable can be set at any time, changes will immediately
                take effect. When |g:latex_to_unicode_suggestions| is `0`,
                this setting has no effect (it's like if it was always on).
                
                                                  *g:latex_to_unicode_auto*
g:latex_to_unicode_auto

                Determines whether to activate LaTeX-to-Unicode substitution
                on the fly as you type (in |Insert| mode), see
                |julia-vim-L2U-as-you-type|. If unspecified, it is `0` (off).
                You can enable the feature by default by inserting the line
>
                    let g:latex_to_unicode_auto = 1
<
                in your |.vimrc| file. You can change this setting at any
                moment while editing, but you need to invoke
                |LaTeXtoUnicode#Init()| for the change to take effect.


                                                *g:latex_to_unicode_keymap*
g:latex_to_unicode_keymap

                Determines whether to activate the |keymap|-based
                LaTeX-to-Unicode substitutions, see |julia-vim-L2U-keymap|.
                If unspecified, it is `0` (off). You can enable the feature by
                default by inserting the line
>
                    let g:latex_to_unicode_keymap = 1
<
                in your |.vimrc| file. You can change this setting at any
                moment while editing, but you need to invoke
                |LaTeXtoUnicode#Init()| for the change to take effect.

                                            *g:latex_to_unicode_file_types*
g:latex_to_unicode_file_types

                Contains a |pattern|, or a list of patterns, which are matched
                against the |'filetype'| to determine when to enable the
                LaTeX-to-Unicode functionality, see |julia-vim-L2U-file-types|.
                By default, its value is `"julia"`. The patterns provided must
                match the whole filetype name. See also
                |g:latex_to_unicode_file_types_blacklist|.

                                  *g:latex_to_unicode_file_types_blacklist*
g:latex_to_unicode_file_types_blacklist

                Same as |g:latex_to_unicode_file_types|, but acts in reverse:
                it disables the LaTeX-to-Unicode functionality when the
                |'filetype'| matches the provided pattern (or any of the
                patterns if a list is provided). By default, it contains an
                unmatchable pattern, i.e. it is effectively disabled.

                                           *g:latex_to_unicode_cmd_mapping*
g:latex_to_unicode_cmd_mapping

                Specifies the mapping (or list of mappings) for the
                substitution in |Command-line| mode. By default, it is
                `['<Tab>', '<S-Tab>']`, but it can be changed to avoid
                overriding other user-defined mapping, e.g. to `'<S-Tab>'`
                (if your terminal suppoorts it) or `'<C-\><Tab>'`.
                The `'<Tab>'` (or to be more precise the |wildchar| key) and
                `'<S-Tab>'` mappings are special in that they fall back to
                performing default Vim completions in case no suitable
                substitutions are found.

==============================================================================
FUNCTIONS                                         *julia-vim-L2U-functions*

                                                    *LaTeXtoUnicode#Init()*
LaTeXtoUnicode#Init()

                Initialize or re-initialize the LaTeX-to-Unicode substitutions
                (see |julia-vim-L2U-introduction|). Must be invoked after
                changing |g:latex_to_unicode_tab| or |g:latex_to_unicode_auto|
                to make the changes take effect.

                                                  *LaTeXtoUnicode#Enable()*
                                                 *LaTeXtoUnicode#Disable()*
                                                  *LaTeXtoUnicode#Toggle()*
LaTeXtoUnicode#Enable()
LaTeXtoUnicode#Disable()
LaTeXtoUnicode#Toggle()

                These functions enable/disable/toggle the LaTeX-to-Unicode
                functionality, regardless of the |'filetype'| specified in
                |g:latex_to_unicode_file_types| and
                |g:latex_to_unicode_file_types_blacklist|. See
                |julia-vim-L2U-enable-disable|. Note that LaTeXtoUnicode#Enable()
                will override the |'omnifunc'| definition, if present. However,
                LaTeXtoUnicode#Disable() will restore it.
                These functions implicitly invoke |LaTeXtoUnicode#Init()|.


 vim:tw=78:et:ft=help:norl:

endif