Add GraalPython 22.0.0 (#2226)

This reverts commit 90d0d20508.

After further consideration, we've decided to remove this workaround:
* It only has an effect if the user has added `gnubin` from Homebrew Coreutils to PATH which is an unsupported setup
* It was intended to be applied only to a few select 3.8 and 3.9 versions that officially support Apple Silicon and only fail with Homebrew Coreutils in PATH because they have `config.*` from a too old version of Autoconf that doesn't support the Arm64 arch -- but
  * CPython devs [didn't actually fix the problem in 3.10, either, only in 3.11](https://github.com/pyenv/pyenv/pull/2157#issuecomment-968055387), so we'd need to apply it to all 3.10 releases, too
  * users started pushing this workaround into other unrelated branches because they were using the above unsupported setup. See https://github.com/pyenv/pyenv/pull/2190#pullrequestreview-835221952 for discussion.

.dockerignore

@@ -0,0 +1,4 @@
+.git/
+.python-version
+.vscode/
+.idea/

.github/FUNDING.yml

@@ -0,0 +1,12 @@
+# These are supported funding model platforms
+
+github: [pyenv] # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
+patreon: # Replace with a single Patreon username
+open_collective: pyenv # Replace with a single Open Collective username
+ko_fi: # Replace with a single Ko-fi username
+tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+liberapay: # Replace with a single Liberapay username
+issuehunt: # Replace with a single IssueHunt username
+otechie: # Replace with a single Otechie username
+custom: ['https://www.bountysource.com/teams/yyuu-pyenv/issues'] # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,21 @@
+Too many issues will kill our team's development velocity, drastically.
+Make sure you have checked all steps below.
+
+### Prerequisite
+* [ ] Make sure your problem is not listed in [the common build problems](https://github.com/pyenv/pyenv/wiki/Common-build-problems).
+* [ ] Make sure no duplicated issue has already been reported in [the pyenv issues](https://github.com/pyenv/pyenv/issues). You should look for closed issues, too.
+* [ ] Make sure you are not asking us to help solving your specific issue.
+  * GitHub issues is opened mainly for development purposes. If you want to ask someone to help solving your problem, go to some community site like [Gitter](https://gitter.im/yyuu/pyenv), [StackOverflow](https://stackoverflow.com/questions/tagged/pyenv), etc.
+* [ ] Make sure your problem is not derived from packaging (e.g. [Homebrew](https://brew.sh)).
+  * Please refer to the package documentation for the installation issues, etc.
+* [ ] Make sure your problem is not derived from plugins.
+  * This repository is maintaining `pyenv` and the default `python-build` plugin only. Please refrain from reporting issues of other plugins here.
+
+### Description
+- [ ] Platform information (e.g. Ubuntu Linux 16.04):
+- [ ] OS architecture (e.g. amd64):
+- [ ] pyenv version:
+- [ ] Python version:
+- [ ] C Compiler information (e.g. gcc 7.3): 
+- [ ] Please attach the debug trace of the failing command as a gist:
+  * Run `env PYENV_DEBUG=1 <faulty command> 2>&1 | tee trace.log` and attach `trace.log`. E.g. if you have a problem with installing Python, run `env PYENV_DEBUG=1 pyenv install -v <version> 2>&1 | tee trace.log` (note the `-v` option to `pyenv install`).

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+Make sure you have checked all steps below.
+
+### Prerequisite
+* [ ] Please consider implementing the feature as a hook script or plugin as a first step.
+  * pyenv has some powerful support for plugins and hook scripts. Please refer to [Authoring plugins](https://github.com/pyenv/pyenv/wiki/Authoring-plugins) for details and try to implement it as a plugin if possible.
+* [ ] Please consider contributing the patch upstream to [rbenv](https://github.com/rbenv/rbenv), since we have borrowed most of the code from that project.
+  * We occasionally import the changes from rbenv. In general, you can expect changes made in rbenv will be imported to pyenv too, eventually.
+  * Generally speaking, we prefer not to make changes in the core in order to keep compatibility with rbenv.
+* [ ] My PR addresses the following pyenv issue (if any)
+  - Closes https://github.com/pyenv/pyenv/issues/XXXX
+
+### Description
+- [ ] Here are some details about my PR
+
+### Tests
+- [ ] My PR adds the following unit tests (if any)

.github/no-response.yml

@@ -0,0 +1,13 @@
+# Configuration for probot-no-response - https://github.com/probot/no-response
+
+# Number of days of inactivity before an Issue is closed for lack of response
+daysUntilClose: 30
+# Label requiring a response
+responseRequiredLabel: need-feedback
+# Comment to post when closing an Issue for lack of response. Set to `false` to disable
+closeComment: >
+  This issue has been automatically closed because there has been no response
+  to our request for more information from the original author. With only the
+  information that is currently in the issue, we don't have enough information
+  to take action. Please reach out if you have or find the answers we need so
+  that we can investigate further.

.github/workflows/macos_tests.yml

@@ -0,0 +1,41 @@
+name: macos_tests
+on: [pull_request, push]
+jobs:
+  macos_tests:
+    strategy:
+      fail-fast: false
+      matrix:
+        python-version:
+          - 2.7.18
+          - 3.5.10
+          - 3.6.15
+          - 3.7.10
+          - 3.8.10
+          - 3.9.5
+          - 3.10.0
+    runs-on: macos-10.15
+    steps:
+      - uses: actions/checkout@v2
+      # Normally, we would use the superbly maintained...
+      # - uses: actions/setup-python@v2
+      #   with:
+      #    python-version: ${{ matrix.python-version }}
+      # ... but in the repo, we want to test pyenv builds on macOS
+      - run: |
+          brew install openssl readline sqlite3 xz zlib
+      # https://github.com/pyenv/pyenv#installation
+      - run: pwd
+      - env:
+          PYENV_ROOT: /Users/runner/work/pyenv/pyenv
+        run: |
+          echo $PYENV_ROOT
+          echo "$PYENV_ROOT/shims:$PYENV_ROOT/bin" >> $GITHUB_PATH
+          bin/pyenv install ${{ matrix.python-version }}
+          bin/pyenv global ${{ matrix.python-version }}
+          bin/pyenv rehash
+      - run: python --version
+      - run: python -m pip --version
+      - shell: python  # Prove that actual Python == expected Python
+        env:
+          EXPECTED_PYTHON: ${{ matrix.python-version }}
+        run: import os, sys ; assert sys.version.startswith(os.getenv("EXPECTED_PYTHON"))

.github/workflows/pyenv_tests.yml

@@ -0,0 +1,35 @@
+name: pyenv_tests
+on: [pull_request, push]
+jobs:
+  pyenv_tests:
+    strategy:
+      fail-fast: false
+      matrix:
+        os:
+          - ubuntu-20.04
+          - ubuntu-18.04
+          - macos-11
+          - macos-10.15
+    runs-on: ${{ matrix.os }}
+    steps:
+      - uses: actions/checkout@v2
+      # Normally, we would use the superbly maintained...
+      # - uses: actions/setup-python@v2
+      #   with:
+      #    python-version: ${{ matrix.python-version }}
+      # ... but in the repo, we want to test pyenv builds on Ubuntu
+      # - run: |
+          # sudo apt-get install -y build-essential libssl-dev zlib1g-dev libbz2-dev \
+              # libreadline-dev libsqlite3-dev wget curl llvm libncurses5-dev libncursesw5-dev \
+              # xz-utils tk-dev libffi-dev liblzma-dev python-openssl git
+      # https://github.com/pyenv/pyenv#installation
+      - run: |
+          if test "$RUNNER_OS" == "macOS"; then brew install coreutils; fi
+      - run: pwd
+      - env:
+          PYENV_ROOT: /home/runner/work/pyenv/pyenv
+        run: |
+          echo $PYENV_ROOT
+          echo "$PYENV_ROOT/shims:$PYENV_ROOT/bin" >> $GITHUB_PATH
+      - run: |
+          make test

.github/workflows/ubuntu_tests.yml

@@ -0,0 +1,43 @@
+name: ubuntu_tests
+on: [pull_request, push]
+jobs:
+  ubuntu_tests:
+    strategy:
+      fail-fast: false
+      matrix:
+        python-version:
+          - 2.7.18
+          - 3.5.10
+          - 3.6.15
+          - 3.7.10
+          - 3.8.10
+          - 3.9.5
+          - 3.10.0
+    runs-on: Ubuntu-20.04
+    steps:
+      - uses: actions/checkout@v2
+      # Normally, we would use the superbly maintained...
+      # - uses: actions/setup-python@v2
+      #   with:
+      #    python-version: ${{ matrix.python-version }}
+      # ... but in the repo, we want to test pyenv builds on Ubuntu
+      - run: |
+          sudo apt-get install -y build-essential libssl-dev zlib1g-dev libbz2-dev \
+              libreadline-dev libsqlite3-dev wget curl llvm libncurses5-dev libncursesw5-dev \
+              xz-utils tk-dev libffi-dev liblzma-dev python-openssl git
+      # https://github.com/pyenv/pyenv#installation
+      - run: pwd
+      - env:
+          PYENV_ROOT: /home/runner/work/pyenv/pyenv
+        run: |
+          echo $PYENV_ROOT
+          echo "$PYENV_ROOT/shims:$PYENV_ROOT/bin" >> $GITHUB_PATH
+          bin/pyenv install ${{ matrix.python-version }}
+          bin/pyenv global ${{ matrix.python-version }}
+          bin/pyenv rehash
+      - run: python --version
+      - run: python -m pip --version
+      - shell: python  # Prove that actual Python == expected Python
+        env:
+          EXPECTED_PYTHON: ${{ matrix.python-version }}
+        run: import os, sys ; assert sys.version.startswith(os.getenv("EXPECTED_PYTHON"))

.gitignore

@@ -7,3 +7,4 @@
 /src/Makefile
 /src/*.o
 /bats/
+/default-packages

.travis.yml

@@ -1,7 +1,83 @@
-sudo: false
-install: git clone --depth 1 https://github.com/sstephenson/bats.git
-script: make test
+# Two types of tests:
+#
+# 1. shell tests run using bats
+# 2. build tests also run using bats
+#
+# Shell tests are run unconditionally on Linux (see jobs.include).
+#
+# Build tests can be skipped by starting the commit message with
+# '[skip build]'.
+#
+# Build tests are run on platforms generated from all combinations
+# of keys below.
 language: c
+
+os:
+- linux
+- osx
+
+dist:
+- focal
+
+# https://docs.travis-ci.com/user/reference/osx/#macos-version
+osx_image:
+- xcode9.4.1  # macOS 10.13.6
+- xcode10.3   # macOS 10.14.4
+- xcode11.6   # macOS 10.15.7
+- xcode12.2   # macOS 10.15.7
+
 env:
-  - PYENV_NATIVE_EXT=
-  - PYENV_NATIVE_EXT=1
+- PYTHON_BUILD_VERSION=3.9.1
+- PYTHON_BUILD_VERSION=3.7.5
+
+before_install:
+- date +%Y-%m-%dT%H:%M:%S
+
+install: git clone --depth 1 --branch v1.2.0 https://github.com/bats-core/bats-core.git bats
+
+# Default for auto-generated jobs.
+script: make test-build
+
+jobs:
+  include:
+  # Shell-based tests should execute every time.
+  - stage: test shell
+    script: make test
+    env: PYENV_NATIVE_EXT=1
+    after_script: []
+    os: linux
+  - stage: test shell
+    script: make test
+    env: PYENV_NATIVE_EXT=
+    after_script: []
+    os: linux
+
+  exclude:
+  # For each osx_image but one there should be an entry in the exclude
+  # list, to prevent duplicate Linux builds.
+  - os: linux
+    osx_image: xcode9.4
+  - os: linux
+    osx_image: xcode10
+
+  allow_failures:
+  - env: PYTHON_BUILD_VERSION=3.9.1
+
+stages:
+- test shell
+- name: test
+  if: NOT (commit_message =~ /^\[skip build\]/)
+
+# Default 
+
+notifications:
+  email:
+    on_success: never
+
+deploy:
+  provider: releases
+  api_key:
+    secure: FLWevL09KYp7V1SjJUNEdWzuomuocXwNvPr1DSAFH7mmrjKTtjzwrjINAthSqzjlDrs5B//P47l1VLyHp5byEzy673W+bOmEg8swmqc7E9FrHLRyEByd/yca3DzkZgXEXgGdY/cl7tHhM4V2fYKEgAIWbFV+takmTFMK4WkEtNg=
+  on:
+    repo: pyenv/pyenv
+    tags: true

CHANGELOG.md

@@ -1,5 +1,492 @@
 ## Version History
 
+## Release 2.2.3
+
+* Add new pypy versions (pypy2.7-7.3.2~7.3.5) to the version list (#2194)
+* Fix Python 3.7.12 compilation on macOS arm64/M1. (#2190)
+* Fix Python 3.6.15 compilation on macOS arm64/M1. (#2189) 
+* Add Anaconda3-2021.11 (#2193) 
+* CPython 3.11.0a3 (#2187)
+* Fix errant "echo" in README install instructions (#2185)
+* Add Miniforge and Mambaforge 4.10.3-10 (#2184)
+* Add CPython 3.10.1 (#2183)
+* Fix 3.6.15 build on macOS (#2182)
+
+## Release 2.2.2
+
+* Add support for macOS Apple M1 (#2164)
+
+## Release 2.2.1
+
+* Add CPython 3.9.9 (#2162)
+* Add CPython 3.9.8 (#2152)
+* Add Add micropython 1.17 (#2158)
+* Add Add micropython 1.16 (#2158)
+* Patch 3.10.0 configure, fixes https://bugs.python.org/issue45350 (#2155)
+* Use command and type instead of which (#2144)
+* Add definition of pyenv help in COMMANDS.md #2139
+* Use OpenSSL 1.0 for CPython 2.7.18
+
+## Release 2.2.0
+* Adding PyPy release 7.3.7 (Python 3.7 and 3.8). (#2132)
+* Append Homebrew custom prefix to search path (#1957)
+* Add documentation for init command (#2125)
+* Add setup instructions for the case when one installs Pyenv as part of a batch job (#2127)
+* Add documentation for completions command (#2126)
+* Default --with-universal-archs to universal2 on Apple Silicon (#2122)
+* Update README.md (#2120)
+* Add GraalPython 21.3.0 (#2117)
+* Pypy ver 7.3.6 - python 3.7 and python 3.8 (#2111)
+* Discover Tcl/Tk reliably and use active version (#2106)
+* Fish installation instructions (#2104)
+* Add CPython 3.11.0a1 (#2099)
+
+## Release 2.1.0
+* Fix mambaforge-pypy3 build (#2096)
+* Add Python 3.10.0 (#2093)
+* Add documentation for exec command (#2090)
+* Add documentation for shims command (#2091)
+* Add documentation for hooks command (#2089)
+* Add documentation for root command (#2088)
+* Add documentaion for prefix command (#2087)
+* Update to Pyston's v2 package of the 2.3.1 release (#2078)
+* Add pyston-2.3.1 support (#2075)
+* Don't update conda when installing pip (#2074)
+* Improve `add_miniconda.py` (#2072)
+* GitHub actions tests (#2073)
+* Fix sed commands (#2071)
+* macOS: fix the build of Python 2.7.18 on macOS 11.5.2 (Big Sur) + Apple Silicon (#2061)
+
+## Release 2.0.7
+* Update setup instructions in the Readme (#2067)
+* Allow tcl-tk as argument or try with homebrew by default (#1646)
+* Allow system Python in sbin (#2065)
+* Prevent addition of duplicate plugin dirs to PATH (#2045)
+* Disable coreutils on M1 Apple Silicon with arm64 (#2020)
+* Add Python 3.10.0rc2 (#2053)
+* Add space after `yes/no` prompt (#2040)
+* Add CPython v3.6.15 and v3.7.12 (#2052)
+* Add missing Python 2.6.x definitions and patches (#2051)
+* Fix build of ossaudiodev in Linux/FreeBSD for Python 2.6 (#2049)
+* Fix build of ossaudiodev in Linux/FreeBSD for Python 3.1 (#2047)
+
+## Release 2.0.6
+* Add CPython 3.9.7 (#2044)
+* Add CPython v3.8.12 (#2043)
+* Adapt conda.bash for bash associative array (#2037)
+
+## Release 2.0.5
+
+* Move man page to location where it can be automatically found by man (#2032)
+* Update checksums for CPython 3.10.0rc1 (#2025)
+* Remove 3.9.3 (#2022)
+* Add CPython 3.10.0rc1(#2023)
+
+## Release 2.0.4
+
+- Added scripts for rolling releases of Miniforge (#2019)
+- Update pyston-2.3 (#2017)
+- Add GraalPython 21.2.0 (#2018)
+- Add CPython  3.10.0b4 (#2013), (#2005)
+- Add Pyston 2.3 (#2012)
+
+## Release 2.0.3
+
+* Remove PATH warning (#2001)
+* Add Python 3.6.14, 3.7.11, 3.8.11, and 3.9.6 (#1996)
+* Miniforge minor update to 4.10.1-5 (#1992)
+* Suggest that fish users init in interactive mode (#1991)
+
+## Release 2.0.2
+
+* Miniforge minor update to 4.10.1-5 (#1992)
+* Suggest that fish users init in interactive mode (#1991)
+* Add 3.10.0b3 (#1988)
+* Revert "Drop inferring version to install from `pyenv local`" (#1984)
+* Use system Python3 for tests (#1979)
+* Check for shims in path with pure Bash (#1978)
+* Update setup instructions for debian, ubuntu etc. (#1977)
+
+## Release 2.0.1
+
+* Drop inferring version to install from `pyenv local` (#1907)
+* Create mambaforge-4.10.1-4 (#1971)
+* Add 3.10.0b2 recipe (#1966)
+* Fix .bashrc `echo` install syntax error (#1965)
+* Add explicit Zsh instructions for MacOS (#1964)
+* Install pip with pyston (#1955)
+* Mention log file if an error happened before building, too (#1537)
+* Add pypy3.7-7.3.5 (#1950)
+
+## Release 2.0.0
+
+* Support for CPython 3.9.5 has been added.
+* Support for CPython 3.8.10 has been added.
+* Support for CPython 3.10.0b1 has been added.
+* Support for GraalPython 21.1.0 has been added.
+* Support for  Anaconda 2021.05 has been added.
+* Support for   Miniforge3 4.10.1-1 has been added.
+* CPython 3.10-dev target branch renamed.
+* CPython 3.10-dev and 3.11-dev updated.
+* Bump OpenSSL to 1.1.1x for all Pythons that support MacOS 11
+* Update generated configuration files before run ./configure
+* Full shell configuration instructions placed into `pyenv init`
+* Prevent build from installing MacOS apps globally
+* ldflags_dirs is not needed for Python and causes failures
+* Report cache filename at download
+* Add micropython 1.15
+* Correct URLs for Stackless builds and add Stackless 2.7.16
+
+## Breaking changes
+* Split startup logic into PATH and everything else (https://github.com/pyenv/pyenv/issues/1649#issuecomment-694388530)
+
+## 1.2.27
+
+* Add GraalPython 21.1.0 (#1882)
+* Add CPython 3.10.0a7 (#1880)
+* Docs(README): fix info about version-file separator (#1874)
+* List versions starting with a dot (#1350)
+* Feat: support (skip) commented lines in version-file (#1866)
+* pypy3.7-7.3.4 (#1873)
+* Create miniforge3-4.10 (#1868)
+* Add CPython 3.9.4 (#1865)
+
+## 1.2.26
+
+* Add CPython 3.9.4 (#1865)
+
+## 1.2.25
+
+* bpo-43631: update to openssl 1.1.1k (#1861)
+* Add CPython 3.9.3 and 3.8.9 (#1859)
+* Add micropython 1.14 (#1858)
+* Shell detect improvements (#1835)
+* Test(init): remove misleading detect from parent shell case arg (#1856)
+* Add GraalPython 21.0.0 (#1855)
+
+## 1.2.24
+
+* GitHub Actions: Add $PYENV_ROOT/shims to $PATH (#1838)
+* Add Python 3.10.0a6 (#1839)
+* Remove the "Using script's directory as PYENV_DIR if shim is invoked with a script argument" feature (#1814)
+* Update GET_PIP_URL (#1844)
+* GitHub Action to build Python versions on Ubuntu (#1794)
+* Make work in nounset (-u) mode (#1786)
+* Update miniforge3-4.9.2 (#1834)
+* Added aarch64 for Linux in anaconda_architecture() (#1833)
+* Hook script to add latest suffix for install command (#1831)
+* Fix error link (#1832)
+* Clarify proxy variable names in readme (#1830)
+* Travis CI: Add Xcode 12 on macOS 10.15.5 (#1708)
+* Added --nosystem argument (#1829)
+* Add CPython 3.8.8 (#1825)
+* Add CPython 3.9.2 (#1826)
+* Add manpage (#1790)
+
+## 1.2.23
+
++ python-build: Add CPython v3.7.10 (#1818)
++ python-build: Add CPython v3.6.13 (#1817)
+* python-build: Add PyPy 3.7-c-jit-latest (#1812)
+* python-build: Add PyPy 3.7 (#1718, #1726, #1780)
+* python-build: Add miniconda3 4.9.2 (#1763)
+* python-build: Add miniconda3 4.8.3 (#1763)
+* python-build: Add miniconda3 4.8.2 (#1763)
+* python-build: Add Miniforge3-4.9.2 (#1782)
+* python-build: Fix download links for some PyPy and Stackless versions (#1692)
+* python-build: Add PYENV_DEBUG option (#1806)
+* python-build: Fix get-pip which dropped support for legacy Python (#1793)
+* pyenv-help: Fix `sed: RE error: illegal byte sequence` (#1714)
+* pyenv-versions: Fix not printing asterisk for current version in Bash 3 (#1815)
+* pyenv-prefix: "system" python - support cases where python3 is in PATH but not python (#1655)
+* pyenv-which: Added fallback to system executable (#1797)
+* pyenv-rehash: Use associative arrays for better performance on bash >= 4 (#1749)
+* pyenv-rehash: Try to sleep in 0.1 sec steps when acquiring lock (#1798)
+* pyenv: Use a better PS4 as recommended by Bash Hackers Wiki (#1810)
+
+## 1.2.22
+
++ python-build: Add LDFLAGS for zlib on macOS >= 1100 (#1711)
++ python-build: Add the CPython 3.9.1 (#1752)
++ python-build: Change order of LDFLAGS paths (#1754)
++ python-build: Docker config for testing python-build (#1548)
++ python-build: Put prerequisite for installation before install (#1750)
++ python-build: Add GraalPython 20.3 (#1736)
++ python-build: Add CPython 3.8.7
++ python-build: Added anaconda3-2020.11 (#1774)
++ python-build: Added arm64 architecture support in python-build for macOS  (#1775)
+
+## 1.2.21
+
+* python-build: Add CPython 3.9.0 (#1706)
+* python-build: Add CPython 3.8.6 (#1698)
+* python-build: Add CPython 3.7.9 (#1680)
+* python-build: Add CPython 3.6.12 (#1680)
+* python-build: Add CPython 3.5.10 (#1690)
+* python-build: Add Jython 2.7.2 (#1672)
+* python-build: Add Graalpython 20.1.0 (#1594)
+* python-build: Add Graalpython 20.2.0 (#1594)
+* python-build: Add Anaconda3-2020.07 (#1684)
+* python-build: Add micropython-1.13 (#1704)
+* python-build: Fix PyPy download links (#1682)
+* python-build: Support for `PYTHON_BUILD_MIRROR_URL` when checksums do not exist (#1673)
+* pyenv: Search for plugins in `PYENV_DIR` and `PYENV_ROOT` (#1697)
+* pyenv-help: Fix 'sed: RE error: illegal byte sequence' (#1670)
+
+## 1.2.20
+
+* python-build: Add CPython 3.8.5 (#1667)
+* python-build: Add CPython 3.8.4 (#1658)
+* python-build: Add CPython 3.7.8
+* python-build: Add CPython 3.6.11
+* pyenv-install: Make grep detection more robust (#1663)
+* python-build: Fix has_tar_xz_support function on FreeBSD. (#1652)
+
+## 1.2.19
+
+* python-build: Add CPython 3.8.3 (#1612)
+* python-build: Add CPython 2.7.18 (#1593)
+* python-build: Add CPython 3.10-dev (#1619)
+* python-build: Add anaconda3-2020.02 (#1584)
+* python-build: Add stackless 3.7.5 (#1589)
+
+## 1.2.18
+
+* python-build: Update download URLs for old OpenSSL releases (#1578)
+* python-build: Prevent `brew: command not found` messages that are not errors (#1544)
+
+## 1.2.17
+
+* python-build: Add CPython 3.8.2
+* python-build: Add CPython 3.7.7 (#1553)
+* python-build: Add Miniconda versions newer than 4.3.30 (#1361)
+* python-build: Add Micropython 1.12 (#1542)
+* python-build: Add Add CPython 3.9.0a4
+* pyenv: Fix sed illegal byte sequence error (#1521)
+
+## 1.2.16
+
+* python-build: Add CPython 3.8.1 (#1497)
+* python-build: Add CPython 3.7.6 (#1498)
+* python-build: Add CPython 3.6.10 (#1499)
+* python-build: Add CPython 3.5.9 (#1448)
+* python-build: Add PyPy 7.3.0 (1502)
+
+## 1.2.15
+
+* python-build: Add CPython 3.7.5 (#1423)
+* python-build: Add CPython 2.7.17 (#1433)
+* python-build: Add CPython 3.5.8 (#1441)
+* python-build: Add PyPy 7.2.0 (#1418)
+* python-build: Add anaconda3-2019.10 (#1427)
+* pyenv-help: Show text for all pyenv commands in pyenv-help (#1421)
+
+## 1.2.14
+
+* python-build: Add CPython 3.8.0 (#1416)
+* python-build: Add Anaconda-2019.07 (#1382)
+* python-build: Add Micropython 1.11 (#1395)
+* python-build: Fix compatibility issues with Homebrew installed Tcl/Tk (#1397)
+* pyenv-exec: Do not use `exec -a`, do not mangle PATH for system Python (#1169)
+
+## 1.2.13
+
+* python-build: Add CPython 3.7.4
+* python-build: Add CPython 3.6.9
+
+## 1.2.12
+
+* python-build: Find zlib from Xcode or brew on Mojave (#1353)
+* python-build: Add PyPy 7.1.1 (#1335)
+* python-build: Add CPython 3.8.0b1
+
+## 1.2.11
+
+* python-build: Fix `posix_close` name collision in 2.4 builds (#1321)
+* python-build: Add CPython 3.4.10 (#1322)
+* python-build: Add Anaconda 2019.03
+* python-build: Allow overriding the preference of OpenSSL version per definition basis (#1302, #1325, #1326)
+* python-build: Imported changes from rbenv/ruby-build 20190401 (#1327)
+* python-build: Use GNU Readline 8.0 on macOS if brew's package isn't available (#1329)
+
+## 1.2.10
+
+* python-build: Force y, Y, yes or YES to confirm installation (#1217)
+* python-build: Add PyPy 7.0.0, 7.1.0
+* python-build: Add CPython 2.7.16, 3.5.7 and 3.7.3
+* python-build: Install `python-gdb.py` (#1190, #1289)
+* python-build: Add micropython 1.10
+* python-build: Prefer Homebrew's OpenSSL 1.1 over 1.0 (#839, #1302)
+
+## 1.2.9
+
+* python-build: Add CPython 3.7.2 and CPython 3.6.8 (#1256)
+* python-build: Add anaconda[23]-5.3.1 (#1246)
+* python-build: Add Anaconda 2018.12 (#1259)
+* python-build: Fix ironpython-dev git repo url (#1260)
+* python-build: Add `OPENSSL_NO_SSL3` patch for CPython 3.3.7 (#1263)
+
+## 1.2.8
+
+* python-build: Add CPython 3.7.1
+* python-build: Add CPython 3.6.7
+* python-build: Add anaconda[23]-5.3.0 (#1220)
+
+## 1.2.7
+
+* python-build: Add CPython 3.5.6 (#1199)
+* python-build: Add CPython 3.4.9
+
+## 1.2.6
+
+* python-build: Added CPython 3.6.6 (#1178)
+* python-build: Check wget version iff wget is going to be used (#1180)
+
+## 1.2.5
+
+* python-build: Add CPython 3.7.0 (#1177)
+* python-build: Add micropython 1.9.4 (#1160)
+* python-build: Add anaconda[23]-5.2.0 (#1165)
+* pyenv: Fix `seq(1)` is not available on OpenBSD (#1166)
+
+## 1.2.4
+
+* python-build: Add CPython 2.7.15
+* python-build: Add PyPy 6.0.0
+* python-build: Allow overriding HTTP client type based on environment variable `PYTHON_BUILD_HTTP_CLIENT` (#1126)
+* python-build: Use version-specific `get-pip.py` when installing 2.6 and 3.2 (#1131)
+* pyenv: Merge rbenv master (#1151)
+* pyenv: Make `pyenv-rehash` safer for multiple processes (#1092)
+
+## 1.2.3
+
+* python-build: Add CPython 3.6.5
+* python-build: Set openssl PKG_CONFIG_PATH for python 3.7 (#1117)
+* python-build: Add ActivePython versions 2.7.14, 3.5.4, 3.6.0 (#1113)
+* python-build: Unset `PIP_VERSION` before invoking `get-pip.py` as a workaround for `invalid truth value` error (#1124)
+
+## 1.2.2
+
+* python-build: Add PyPy3 5.10.1 (#1084)
+* python-build: Add CPython 3.5.5 (#1090)
+* python-build: Add Anaconda[23]-5.1.0 (#1100)
+* python-build: Fix checksum issue for CPython 3.4.8 (#1094)
+* python-build: Prevent Anaconda from installing a `clear` shim (#1084)
+## 1.2.1
+
+* python-build: Add CPython 3.6.4
+* python-build: Add PyPy[23] 5.10
+
+## 1.2.0
+
+* python-build: Import changes from ruby-build v20171031 (#1026)
+* python-build: Ignore LibreSSL bundled with macOS 10.13 (#1025)
+* python-build: Skip passing `--enable-unicode` to CPython 3.3+ (#912)
+* python-build: Add CPython 3.3.7 (#1053)
+* python-build: Add micropython 1.9.3
+* python-build: Add PyPy 5.9.0
+* python-build: Add Miniconda[23] 4.3.14, 4.3.21, 4.3.27, 4.3.30
+* python-build: Add Anaconda[23] 5.0.1
+* python-build: Update Anaconda[23] 5.0.0 to 5.0.0.1 bugfix release
+
+## v1.1.5
+
+* python-build: Add CPython 3.6.3
+* python-build: Add CPython 3.7.0a1
+* python-build: Add Anaconda[23] 5.0.0
+
+## v1.1.4
+
+* pyenv: Workaround for scripts in `$PATH` which needs to be source'd (#100, #688, #953)
+* python-build: Add support for PyPy3 executables like `libpypy3-c.so` (#955, #956)
+* python-build: Add CPython 2.7.14, 3.4.7, 3.5.4 (#965, #971, #980)
+* python-build: Add Jython 2.7.1 (#973)
+
+## v1.1.3
+
+* python-build: Add CPython 3.6.2 (#951)
+
+## v1.1.2
+
+* pyenv: Fix incorrect `pyenv --version` output in v1.1.1 (#947)
+
+## v1.1.1
+
+* python-build: Update links to Portable Pypy 5.8-1 bugfix release, affects pypy2.7-5.8.0 and pypy3.5-5.8.0 definitions (#939)
+
+## v1.1.0
+
+* python-build: Add PyPy 5.7.1 (#888)
+* pyenv: Merge rbenv master (#927)
+* python-build: Add PyPy 5.8.0 (#932)
+* python-build: Anaconda[23] 4.4.0
+* python-build: Add micropython-dev
+
+## 1.0.10
+
+* python-build: Add Anaconda2/Anaconda3 4.3.1 (#876)
+* python-build: Make miniconda-latest point to miniconda2-latest (#881)
+* python-build: Fix typo in MacOS packages for anaconda2-4.3.0/4.2.0 (#880)
+
+## 1.0.9
+
+* pyenv: Migrate project site from https://github.com/yyuu/pyenv to https://github.com/pyenv/pyenv
+* python-build: Add PyPy2 5.7.0 (#872, #868)
+* python-build: Add PyPy3 5.7.0-beta (#871, #869)
+* python-build: Add CPython 3.6.1 (#873)
+* python-build: Add Pyston 0.6.1 (#859)
+* python-build: Change default mirror site URL from https://yyuu.github.io/pythons to https://pyenv.github.io/pythons
+* python-build: Upgrade OpenSSL from 1.0.2g to 1.0.2k (#850)
+
+## 1.0.8
+
+* pyenv: Fix fish subcommand completion (#831)
+* python-build: Add Anaconda2/Anaconda3 4.3.0  (#824)
+* python-build: Use CPython on GitHub as the source repository of CPython development versions (#836, #837)
+* python-build: Fix checksum verification issue on the platform where OpenSSL isn't available (#840)
+
+## 1.0.7
+
+* python-build: Add CPython 3.5.3 (#811)
+* python-build: Add CPython 3.4.6 (#812)
+* python-build: Fix tar.gz checksum of CPython 3.6.0 (#793)
+* python-build: Jython installer workaround (#800)
+* python-build: Disable optimization (`-O0`) when `--debug` was specified (#808)
+
+## 1.0.6
+
+* python-build: Add CPython 3.6.0 (#787)
+
+## 1.0.5
+
+* python-build: Add CPython 2.7.13 (#782)
+* python-build: Add CPython 3.6.0rc2 (#781)
+* python-build: Add Anaconda 4.2.0 (#774)
+* python-build: Add Anaconda3 4.2.0 (#765)
+* python-build: Add IronPython 2.7.7 (#755)
+
+## 1.0.4
+
+* python-build: Add PyPy 5.6.0 (#751)
+* python-build: Add PyPy3 3.5 nightlies (`pypy3.5-c-jit-latest` #737)
+* python-build: Add Stackless 2.7.12 (#753)
+* python-build: Add Stackless 2.7.11
+* python-build: Add Stackless 2.7.10
+* python-build: Add Pyston 0.6.0
+* python-build: Add CPython 3.6.0b4 (#762)
+
+## 1.0.3
+
+* python-build: Add CPython 3.6.0b3 (#731, #744)
+* python-build: Add PyPy3.3 5.5-alpha (#734, #736)
+* python-build: Stop specifying `--enable-unicode=ucs4` on OS X (#257, #726)
+* python-build: Fix 3.6-dev and add 3.7-dev (#729, #730)
+* python-build: Add a patch for https://bugs.python.org/issue26664 (#725)
+* python-build: Add Pyston 0.5.1 (#718)
+* python-build: Add Stackless 3.4.2 (#720)
+* python-build: Add IronPython 2.7.6.3 (#716)
+* python-build: Add Stackless 2.7.9 (#714)
+
 ## 1.0.2
 
 * python-build: Add CPython 3.6.0b1 (#699)
@@ -88,12 +575,12 @@
 
 * pyenv: Merge recent changes from rbenv as of 2015-12-14 (#504)
 * python-build: Add a `OPENSSL_NO_SSL3` patch for CPython 2.6, 2.7, 3.0, 3.1, 3.2 and 3.3 series (#507, #511)
-* python-build: Stopped using mirror at yyuu.github.io for CPython since http://www.python.org is on fast.ly
+* python-build: Stopped using mirror at pyenv.github.io for CPython since http://www.python.org is on fast.ly
 
 ### 20151210
 
 * pyenv: Add a default hook for Anaconda to look for original `$PATH` (#491)
-* pyenv: Skip virtualenv aliases on `pyenv versions --skip-aliases` (yyuu/pyenv-virtualenv#126)
+* pyenv: Skip virtualenv aliases on `pyenv versions --skip-aliases` (pyenv/pyenv-virtualenv#126)
 * python-build: Add CPython 2.7.11, 3.5.1 (#494, #498)
 * python-build: Update OpenSSL to 1.0.1q (#496)
 * python-build: Adding SSL patch to build 2.7.3 on Debian (#495)
@@ -110,7 +597,7 @@
 ### 20151105
 
 * python-build: Add anaconda2-2.4.0 and anacondaa3-2.4.0
-* python-biuld: Add Portable PyPy 4.0 (#472)
+* python-build: Add Portable PyPy 4.0 (#472)
 
 ### 20151103
 
@@ -123,7 +610,7 @@
 * pyenv: Different behaviour when invoking .py script through symlink (#379, #404)
 * pyenv: Enabled Gitter on the project (#436, #444)
 * python-build: Add Jython 2.7.1b1
-* python-build: Install OpenSSL on OS X if no proper versionn is available (#429)
+* python-build: Install OpenSSL on OS X if no proper version is available (#429)
 
 ### 20150913
 
@@ -200,12 +687,12 @@
 #### 20150124
 
 * python-build: Import recent changes from ruby-build v20150112
-* python-build: Prevent adding `/Library/Python/X.X/site-packages` to `sys.path` whtn `--enable-framework` is enabled on OS X. Thanks @s1341 (#292)
+* python-build: Prevent adding `/Library/Python/X.X/site-packages` to `sys.path` when `--enable-framework` is enabled on OS X. Thanks @s1341 (#292)
 * python-build: Add new IronPython release; 2.7.5
 
 #### 20141211
 
-* pyenv: Add bulit-in `pip-rehash` feature. You don't need to install [pyenv-pip-rehash](https://github.com/yyuu/pyenv-pip-rehash) anymore.
+* pyenv: Add built-in `pip-rehash` feature. You don't need to install [pyenv-pip-rehash](https://github.com/pyenv/pyenv-pip-rehash) anymore.
 * python-build: Add new CPython release; 2.7.9 (#284)
 * python-build: Add new PyPy releases; pypy3-2.4.0, pypy3-2.4.0-src (#277)
 * python-build: Add build definitions of PyPy nightly build
@@ -315,9 +802,9 @@
 * python-build: Fix build of Tkinter with Tcl/Tk 8.6 (#131)
 * python-build: Fix build problem with Readline 6.3 (#126, #131, #149, #152)
 * python-build: Do not exit with errors even if some of modules are absent (#131)
-* python-build: MacOSX was mispelled as MaxOSX in `anaconda_architecture` (#136)
+* python-build: MacOSX was misspelled as MaxOSX in `anaconda_architecture` (#136)
 * python-build: Use default `cc` as the C Compiler to build CPython (#148, #150)
-* python-build: Display value from `pypy_architecture` and `anaconda_architecture` on errors (yyuu/pyenv-virtualenv#18)
+* python-build: Display value from `pypy_architecture` and `anaconda_architecture` on errors (pyenv/pyenv-virtualenv#18)
 * python-build: Remove old development version; 2.6-dev
 * python-build: Update default setuptools version (3.3 -> 3.4.1)
 
@@ -371,7 +858,7 @@
 * python-build: Activate friendly CPython during build if the one is not activated (8fa6b4a1847851919ad7857c6c42ed809a4d277b)
 * python-build: Fix broken install.sh
 * python-build: Import recent changes from ruby-build v20131225.1
-* version-ext-compat: Removed from default plugin. Please use [pyenv-version-ext](https://github.com/yyuu/pyenv-version-ext) instead.
+* version-ext-compat: Removed from default plugin. Please use [pyenv-version-ext](https://github.com/pyenv/pyenv-version-ext) instead.
 
 #### 0.4.0-20131217
 

COMMANDS.md

@@ -1,10 +1,11 @@
 # Command Reference
 
 Like `git`, the `pyenv` command delegates to subcommands based on its
-first argument. 
+first argument.
 
 The most common subcommands are:
 
+* [`pyenv help`](#pyenv-help)
 * [`pyenv commands`](#pyenv-commands)
 * [`pyenv local`](#pyenv-local)
 * [`pyenv global`](#pyenv-global)
@@ -16,6 +17,17 @@ The most common subcommands are:
 * [`pyenv versions`](#pyenv-versions)
 * [`pyenv which`](#pyenv-which)
 * [`pyenv whence`](#pyenv-whence)
+* [`pyenv exec`](#pyenv-exec)
+* [`pyenv root`](#pyenv-root)
+* [`pyenv prefix`](#pyenv-prefix)
+* [`pyenv hooks`](#pyenv-hooks)
+* [`pyenv shims`](#pyenv-shims)
+* [`pyenv init`](#pyenv-init)
+* [`pyenv completions`](#pyenv-completions)
+
+## `pyenv help`
+
+List all available pyenv commands along with a brief description of what they do. Run `pyenv help <command>` for information on a specific command. For full documentation, see: https://github.com/pyenv/pyenv#readme
 
 
 ## `pyenv commands`
@@ -185,7 +197,7 @@ or, if you prefer 3.3.3 over 2.7.6,
 
 ## `pyenv install`
 
-Install a Python version (using [`python-build`](https://github.com/yyuu/pyenv/tree/master/plugins/python-build)).
+Install a Python version (using [`python-build`](https://github.com/pyenv/pyenv/tree/master/plugins/python-build)).
 
     Usage: pyenv install [-f] [-kvp] <version>
            pyenv install [-f] [-kvp] <definition-file>
@@ -267,6 +279,8 @@ you run the given command.
     $ pyenv which python3.3
     /home/yyuu/.pyenv/versions/3.3.3/bin/python3.3
 
+Use --nosystem argument in case when you don't need to search command in the 
+system environment.
 
 ## `pyenv whence`
 
@@ -276,3 +290,83 @@ Lists all Python versions with the given command installed.
     2.6.8
     2.7.6
     3.3.3
+
+## `pyenv exec`
+
+    Usage: pyenv exec <command> [arg1 arg2...]
+
+Runs an executable by first preparing PATH so that the selected Python
+version's `bin` directory is at the front.
+
+For example, if the currently selected Python version is 3.9.7:
+
+    pyenv exec pip install -r requirements.txt
+    
+is equivalent to:
+
+    PATH="$PYENV_ROOT/versions/3.9.7/bin:$PATH" pip install -r requirements.txt
+
+## `pyenv root`
+
+Displays the root directory where versions and shims are kept.
+
+    $ pyenv root
+    /home/user/.pyenv
+
+## `pyenv prefix`
+
+Displays the directory where a Python version is installed. If no
+version is given, `pyenv prefix` displays the location of the
+currently selected version.
+
+    $ pyenv prefix 3.9.7
+    /home/user/.pyenv/versions/3.9.7
+
+## `pyenv hooks`
+
+Lists installed hook scripts for a given pyenv command.
+
+    Usage: pyenv hooks <command>
+
+## `pyenv shims`
+
+List existing pyenv shims.
+
+    Usage: pyenv shims [--short]
+
+    $ pyenv shims
+    /home/user/.pyenv/shims/2to3
+    /home/user/.pyenv/shims/2to3-3.9
+    /home/user/.pyenv/shims/idle
+    /home/user/.pyenv/shims/idle3
+    /home/user/.pyenv/shims/idle3.9
+    /home/user/.pyenv/shims/pip
+    /home/user/.pyenv/shims/pip3
+    /home/user/.pyenv/shims/pip3.9
+    /home/user/.pyenv/shims/pydoc
+    /home/user/.pyenv/shims/pydoc3
+    /home/user/.pyenv/shims/pydoc3.9
+    /home/user/.pyenv/shims/python
+    /home/user/.pyenv/shims/python3
+    /home/user/.pyenv/shims/python3.9
+    /home/user/.pyenv/shims/python3.9-config
+    /home/user/.pyenv/shims/python3.9-gdb.py
+    /home/user/.pyenv/shims/python3-config
+    /home/user/.pyenv/shims/python-config
+
+## `pyenv init`
+
+Configure the shell environment for pyenv
+
+    Usage: eval "$(pyenv init [-|--path] [--no-rehash] [<shell>])"
+
+      -                    Initialize shims directory, print PYENV_SHELL variable, completions path
+                           and shell function
+      --path               Print shims path
+      --no-rehash          Add no rehash command to output     
+
+## `pyenv completions`
+
+Lists available completions for a given pyenv command.
+
+    Usage: pyenv completions <command> [arg1 arg2...]

CONDUCT.md

@@ -67,9 +67,9 @@ members of the project's leadership.
 
 ## Project Maintainers
 
-* Sam Stephenson <<sstephenson@gmail.com>>
-* Mislav Marohnić <<mislav.marohnic@gmail.com>>
-* Erik Michaels-Ober <<sferik@gmail.com>>
+* Yamashita, Yuu <<peek824545201@gmail.com>>
+* Daniel Hahler <<git@thequod.de>>
+* Josh Friend <<josh@fueledbycaffeine.com>>
 
 ## Attribution
 

Dockerfile

@@ -0,0 +1,35 @@
+FROM ubuntu:18.04
+
+LABEL maintainer="Chris L. Barnes <chrislloydbarnes@gmail.com>"
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update -y \
+    && apt-get install -y \
+        make \
+        build-essential \
+        libssl-dev \
+        zlib1g-dev \
+        libbz2-dev \
+        libreadline-dev \
+        libsqlite3-dev \
+        wget \
+        curl \
+        llvm \
+        libncurses5-dev \
+        libncursesw5-dev \
+        xz-utils \
+        tk-dev \
+        libffi-dev \
+        liblzma-dev \
+        python-openssl \
+        git \
+    && rm -rf /var/lib/apt/lists/*
+
+ENV PYENV_ROOT "/pyenv"
+ENV PATH "$PYENV_ROOT/bin:$PATH"
+
+COPY . /pyenv
+
+RUN eval "$(pyenv init -)"
+

Makefile

@@ -1,4 +1,4 @@
-.PHONY: test
+.PHONY: test test-build
 
 # Do not pass in user flags to build tests.
 unexport PYTHON_CFLAGS
@@ -8,5 +8,18 @@ test: bats
 	PATH="./bats/bin:$$PATH" test/run
 	cd plugins/python-build && $(PWD)/bats/bin/bats $${CI:+--tap} test
 
+PYTHON_BUILD_ROOT := $(CURDIR)/plugins/python-build
+PYTHON_BUILD_OPTS ?= --verbose
+PYTHON_BUILD_VERSION ?= 3.8-dev
+PYTHON_BUILD_TEST_PREFIX ?= $(PYTHON_BUILD_ROOT)/test/build/tmp/dist
+
+test-build:
+	$(RM) -r $(PYTHON_BUILD_TEST_PREFIX)
+	$(PYTHON_BUILD_ROOT)/bin/python-build $(PYTHON_BUILD_OPTS) $(PYTHON_BUILD_VERSION) $(PYTHON_BUILD_TEST_PREFIX)
+	[ -e $(PYTHON_BUILD_TEST_PREFIX)/bin/python ]
+	$(PYTHON_BUILD_TEST_PREFIX)/bin/python -V
+	[ -e $(PYTHON_BUILD_TEST_PREFIX)/bin/pip ]
+	$(PYTHON_BUILD_TEST_PREFIX)/bin/pip -V
+
 bats:
-	git clone https://github.com/sstephenson/bats.git
+	git clone --depth 1 --branch v1.2.0 https://github.com/bats-core/bats-core.git bats

README.md

@@ -2,8 +2,6 @@
 
 [![Join the chat at https://gitter.im/yyuu/pyenv](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/yyuu/pyenv?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
 
-[![Build Status](https://travis-ci.org/yyuu/pyenv.svg?branch=master)](https://travis-ci.org/yyuu/pyenv)
-
 pyenv lets you easily switch between multiple versions of Python. It's
 simple, unobtrusive, and follows the UNIX tradition of single-purpose
 tools that do one thing well.
@@ -11,16 +9,16 @@ tools that do one thing well.
 This project was forked from [rbenv](https://github.com/rbenv/rbenv) and
 [ruby-build](https://github.com/rbenv/ruby-build), and modified for Python.
 
-<img src="https://i.gyazo.com/699a58927b77e46e71cd674c7fc7a78d.png" width="735" height="490" />
+![Terminal output example](/terminal_output.png)
 
 
-### pyenv _does..._
+### what pyenv _does..._
 
-* Let you **change the global Python version** on a per-user basis.
-* Provide support for **per-project Python versions**.
-* Allow you to **override the Python version** with an environment
+* Lets you **change the global Python version** on a per-user basis.
+* Provides support for **per-project Python versions**.
+* Allows you to **override the Python version** with an environment
   variable.
-* Search commands from **multiple versions of Python at a time**.
+* Searches for commands from **multiple versions of Python at a time**.
   This may be helpful to test across Python versions with [tox](https://pypi.python.org/pypi/tox).
 
 
@@ -31,7 +29,7 @@ This project was forked from [rbenv](https://github.com/rbenv/rbenv) and
 * **Need to be loaded into your shell.** Instead, pyenv's shim
     approach works by adding a directory to your `$PATH`.
 * **Manage virtualenv.** Of course, you can create [virtualenv](https://pypi.python.org/pypi/virtualenv)
-    yourself, or [pyenv-virtualenv](https://github.com/yyuu/pyenv-virtualenv)
+    yourself, or [pyenv-virtualenv](https://github.com/pyenv/pyenv-virtualenv)
     to automate the process.
 
 
@@ -46,9 +44,13 @@ This project was forked from [rbenv](https://github.com/rbenv/rbenv) and
   * [Choosing the Python Version](#choosing-the-python-version)
   * [Locating the Python Installation](#locating-the-python-installation)
 * **[Installation](#installation)**
+  * [Prerequisites](#prerequisites)
+  * [Homebrew in macOS](#homebrew-in-macos)
+  * [Windows](#windows)
+  * [Automatic installer](#automatic-installer)
   * [Basic GitHub Checkout](#basic-github-checkout)
     * [Upgrading](#upgrading)
-    * [Homebrew on Mac OS X](#homebrew-on-mac-os-x)
+    * [Homebrew on macOS](#homebrew-on-macos)
     * [Advanced Configuration](#advanced-configuration)
     * [Uninstalling Python Versions](#uninstalling-python-versions)
 * **[Command Reference](#command-reference)**
@@ -87,7 +89,7 @@ then `/bin`.
 pyenv works by inserting a directory of _shims_ at the front of your
 `PATH`:
 
-    ~/.pyenv/shims:/usr/local/bin:/usr/bin:/bin
+    $(pyenv root)/shims:/usr/local/bin:/usr/bin:/bin
 
 Through a process called _rehashing_, pyenv maintains shims in that
 directory to match every Python command across every installed version
@@ -108,19 +110,19 @@ When you execute a shim, pyenv determines which Python version to use by
 reading it from the following sources, in this order:
 
 1. The `PYENV_VERSION` environment variable (if specified). You can use
-   the [`pyenv shell`](https://github.com/yyuu/pyenv/blob/master/COMMANDS.md#pyenv-shell) command to set this environment
+   the [`pyenv shell`](https://github.com/pyenv/pyenv/blob/master/COMMANDS.md#pyenv-shell) command to set this environment
    variable in your current shell session.
 
 2. The application-specific `.python-version` file in the current
    directory (if present). You can modify the current directory's
-   `.python-version` file with the [`pyenv local`](https://github.com/yyuu/pyenv/blob/master/COMMANDS.md#pyenv-local)
+   `.python-version` file with the [`pyenv local`](https://github.com/pyenv/pyenv/blob/master/COMMANDS.md#pyenv-local)
    command.
 
 3. The first `.python-version` file found (if any) by searching each parent
    directory, until reaching the root of your filesystem.
 
-4. The global `~/.pyenv/version` file. You can modify this file using
-   the [`pyenv global`](https://github.com/yyuu/pyenv/blob/master/COMMANDS.md#pyenv-global) command. If the global version
+4. The global `$(pyenv root)/version` file. You can modify this file using
+   the [`pyenv global`](https://github.com/pyenv/pyenv/blob/master/COMMANDS.md#pyenv-global) command. If the global version
    file is not present, pyenv assumes you want to use the "system"
    Python. (In other words, whatever version would run if pyenv weren't in your
    `PATH`.)
@@ -133,8 +135,10 @@ in this example), but also have Python 3.3.6, 3.2, and 2.5 available on your
 `PATH`, one would first `pyenv install` the missing versions, then set `pyenv
 global system 3.3.6 3.2 2.5`. At this point, one should be able to find the full
 executable path to each of these using `pyenv which`, e.g. `pyenv which python2.5`
-(should display `$PYENV_ROOT/versions/2.5/bin/python2.5`), or `pyenv which
-python3.4` (should display path to system Python3).
+(should display `$(pyenv root)/versions/2.5/bin/python2.5`), or `pyenv which
+python3.4` (should display path to system Python3). You can also specify multiple
+versions in a `.python-version` file, separated by newlines.
+Lines starting with a `#` are ignored.
 
 ### Locating the Python Installation
 
@@ -143,16 +147,22 @@ specified, it passes the command along to the corresponding Python
 installation.
 
 Each Python version is installed into its own directory under
-`~/.pyenv/versions`.
+`$(pyenv root)/versions`.
 
 For example, you might have these versions installed:
 
-* `~/.pyenv/versions/2.7.8/`
-* `~/.pyenv/versions/3.4.2/`
-* `~/.pyenv/versions/pypy-2.4.0/`
+* `$(pyenv root)/versions/2.7.8/`
+* `$(pyenv root)/versions/3.4.2/`
+* `$(pyenv root)/versions/pypy-2.4.0/`
 
-As far as pyenv is concerned, version names are simply the directories in
-`~/.pyenv/versions`.
+As far as Pyenv is concerned, version names are simply directories under
+`$(pyenv root)/versions`.
+
+### Managing Virtual Environments
+
+There is a pyenv plugin named [pyenv-virtualenv](https://github.com/pyenv/pyenv-virtualenv) which comes with various features to help pyenv users to manage virtual environments created by virtualenv or Anaconda.
+Because the `activate` script of those virtual environments are relying on mutating `$PATH` variable of user's interactive shell, it will intercept pyenv's shim style command execution hooks.
+We'd recommend to install pyenv-virtualenv as well if you have some plan to play with those virtual environments.
 
 
 ----
@@ -160,130 +170,316 @@ As far as pyenv is concerned, version names are simply the directories in
 
 ## Installation
 
-If you're on Mac OS X, consider [installing with Homebrew](#homebrew-on-mac-os-x).
+### Prerequisites
+
+For pyenv to install python correctly you should [**install the Python build dependencies**](https://github.com/pyenv/pyenv/wiki#suggested-build-environment).
+
+### Homebrew in macOS
+
+   1. Consider installing with [Homebrew](https://brew.sh):
+      ```sh
+      brew update
+      brew install pyenv
+      ```
+   2. Then follow the rest of the post-installation steps under [Basic GitHub Checkout](https://github.com/pyenv/pyenv#basic-github-checkout), starting with #2 ("Configure your shell's environment for Pyenv").
+
+   3. OPTIONAL. To fix `brew doctor`'s warning _""config" scripts exist outside your system or Homebrew directories"_
+   
+      If you're going to build Homebrew formulae from source that link against `libpython`
+      like Tkinter or NumPy
+      _(This is only generally the case if you are a developer of such a formula,
+      or if you have an EOL version of MacOS for which prebuilt bottles are no longer available
+      and are using such a formula)._
+      
+      To avoid them accidentally linking against a Pyenv-provided Python,
+      add the following line into your interactive shell's configuration:
+      
+      * Bash/Zsh:
+      
+        ~~~bash
+        alias brew='env PATH="${PATH//$(pyenv root)\/shims:/}" brew'
+        ~~~
+      
+      * Fish:
+
+        ~~~fish
+        alias brew="env PATH=(string replace (pyenv root)/shims '' \"\$PATH\") brew"
+        ~~~
+
+### Windows
+
+Pyenv does not officially support Windows and does not work in Windows outside
+the Windows Subsystem for Linux.
+Moreover, even there, the Pythons it installs are not native Windows versions
+but rather Linux versions run through a compatibility layer --
+so you won't get Windows-specific functionality.
+
+If you're in Windows, we recommend using @kirankotari's [`pyenv-win`](https://github.com/pyenv-win/pyenv-win) fork --
+which does install native Windows Python versions.
 
 
-### The automatic installer
+### Automatic installer
 
-Visit my other project:
-https://github.com/yyuu/pyenv-installer
+Visit our other project:
+https://github.com/pyenv/pyenv-installer
 
 
 ### Basic GitHub Checkout
 
-This will get you going with the latest version of pyenv and make it
+This will get you going with the latest version of Pyenv and make it
 easy to fork and contribute any changes back upstream.
 
-1. **Check out pyenv where you want it installed.**
-   A good place to choose is `$HOME/.pyenv` (but you can install it somewhere else).
+1. **Check out Pyenv where you want it installed.**
+   A good place to choose is `$HOME/.pyenv` (but you can install it somewhere else):
 
-        $ git clone https://github.com/yyuu/pyenv.git ~/.pyenv
+        git clone https://github.com/pyenv/pyenv.git ~/.pyenv
 
+   Optionally, try to compile a dynamic Bash extension to speed up Pyenv. Don't
+   worry if it fails; Pyenv will still work normally:
 
-2. **Define environment variable `PYENV_ROOT`** to point to the path where
-   pyenv repo is cloned and add `$PYENV_ROOT/bin` to your `$PATH` for access
-   to the `pyenv` command-line utility.
+        cd ~/.pyenv && src/configure && make -C src
 
-        $ echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.bash_profile
-        $ echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.bash_profile
+2. **Configure your shell's environment for Pyenv**
 
-    **Zsh note**: Modify your `~/.zshenv` file instead of `~/.bash_profile`.
-    **Ubuntu note**: Modify your `~/.bashrc` file instead of `~/.bash_profile`.
-
-3. **Add `pyenv init` to your shell** to enable shims and autocompletion.
-   Please make sure `eval "$(pyenv init -)"` is placed toward the end of the shell
-   configuration file since it manipulates `PATH` during the initialization.
-
-        $ echo 'eval "$(pyenv init -)"' >> ~/.bash_profile
-
-    **Zsh note**: Modify your `~/.zshenv` file instead of `~/.bash_profile`.
-    **Ubuntu note**: Modify your `~/.bashrc` file instead of `~/.bash_profile`.
-    
-    **General warning**: There are some systems where the `BASH_ENV` variable is configured
-    to point to `.bashrc`. On such systems you should almost certainly put the abovementioned line
-    `eval "$(pyenv init -)` into `.bash_profile`, and **not** into `.bashrc`. Otherwise you
-    may observe strange behaviour, such as `pyenv` getting into an infinite loop.
-    See [#264](https://github.com/yyuu/pyenv/issues/264) for details.
-
-4. **Restart your shell so the path changes take effect.**
-   You can now begin using pyenv.
-
-        $ exec $SHELL
-
-5. **Install Python versions into `$PYENV_ROOT/versions`.**
-   For example, to download and install Python 2.7.8, run:
-
-        $ pyenv install 2.7.8
-
-   **NOTE:** If you need to pass configure option to build, please use
-   ```CONFIGURE_OPTS``` environment variable.
+   **Note:** The below instructions for specific shells are designed for common shell setups;
+   they also install shell functions into interactive shells only.  
+   If you have an uncommon setup and/or needs and they don't work for you,
+   use the [Advanced Configuration](#advanced-configuration)
+   section below to figure out what you need to do in your specific case.
    
-   **NOTE:** If you want to use proxy to download, please use `http_proxy` and `https_proxy`
-   environment variable.
+   **General MacOS note:**
+   [Make sure that your terminal app is configured to run the shell as a login shell](https://github.com/pyenv/pyenv/wiki/MacOS-login-shell)
+   (especially if you're using an alternative terminal app and/or shell).
+   The configuration samples for MacOS are written under this assumption and won't work otherwise.
+   
+   - For **Bash**:
 
-   **NOTE:** If you are having trouble installing a python version,
+      - **If your `~/.profile` sources `~/.bashrc` (Debian, Ubuntu, Mint):**
+
+         ~~~bash
+         # the sed invocation inserts the lines at the start of the file
+         # after any initial comment lines
+         sed -Ei -e '/^([^#]|$)/ {a \
+         export PYENV_ROOT="$HOME/.pyenv"
+         a \
+         export PATH="$PYENV_ROOT/bin:$PATH"
+         a \
+         ' -e ':a' -e '$!{n;ba};}' ~/.profile
+         echo 'eval "$(pyenv init --path)"' >>~/.profile
+
+         echo 'eval "$(pyenv init -)"' >> ~/.bashrc
+         ~~~
+
+      - **If your `~/.bash_profile` sources `~/.bashrc` (Red Hat, Fedora, CentOS):**
+
+         ~~~ bash
+         sed -Ei -e '/^([^#]|$)/ {a \
+         export PYENV_ROOT="$HOME/.pyenv"
+         a \
+         export PATH="$PYENV_ROOT/bin:$PATH"
+         a \
+         ' -e ':a' -e '$!{n;ba};}' ~/.bash_profile
+         echo 'eval "$(pyenv init --path)"' >> ~/.bash_profile
+
+         echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
+         echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
+         echo 'eval "$(pyenv init --path)"' >> ~/.profile
+
+         echo 'eval "$(pyenv init -)"' >> ~/.bashrc
+         ~~~
+
+      - **If you have no `~/.bash_profile` and your `/etc/profile` sources `~/.bashrc` (SUSE):**
+
+         ~~~bash
+         echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
+         echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
+         echo 'eval "$(pyenv init --path)"' >> ~/.profile
+
+         echo 'if command -v pyenv >/dev/null; then eval "$(pyenv init -)"; fi' >> ~/.bashrc
+         ~~~
+            
+      - **Otherwise if you have no stock `~/.profile` or `~/.bash_profile` (MacOS):**
+      
+         ~~~bash
+         echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
+         echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
+         echo 'eval "$(pyenv init --path)"' >> ~/.profile
+         echo 'if [ -n "$PS1" -a -n "$BASH_VERSION" ]; then source ~/.bashrc; fi' >> ~/.profile
+
+         echo 'eval "$(pyenv init -)"' >> ~/.bashrc
+         ~~~
+
+         In MacOS, make sure that your terminal app runs the shell as a login shell.
+
+      - **Temporary environments (CI, Docker, batch jobs):**
+
+         In CI/build environments, paths and the environment are usually already set up for you
+         in one of the above ways.
+         You may only need to install Pyenv as a shell function into the (noninteractive) shell
+         that runs the batch script, and only if you need subcommands that require `pyenv`
+         to be a shell function (e.g. `shell` and Pyenv-Virtualenv's `activate`).
+
+         ~~~bash
+         eval "$(pyenv init -)"
+         ~~~
+         
+         If you are installing Pyenv yourself as part of the batch job,
+         after installing the files, run the following in the job's shell
+         to be able to use it.
+         
+         ~~~bash
+         export PYENV_ROOT="$HOME/.pyenv"
+         export PATH="$PYENV_ROOT/bin:$PATH"    # if `pyenv` is not already on PATH
+         eval "$(pyenv init --path)"
+         eval "$(pyenv init -)"
+         ~~~
+
+         
+      **General Bash warning**: There are some systems where the `BASH_ENV` variable is configured
+      to point to `.bashrc`. On such systems, you should almost certainly put the
+      `eval "$(pyenv init -)"` line into `.bash_profile`, and **not** into `.bashrc`. Otherwise, you
+      may observe strange behaviour, such as `pyenv` getting into an infinite loop.
+      See [#264](https://github.com/pyenv/pyenv/issues/264) for details.
+
+
+   - For **Zsh**:
+
+      - **MacOS, if Pyenv is installed with Homebrew:**
+
+         ~~~ zsh
+         echo 'eval "$(pyenv init --path)"' >> ~/.zprofile
+      
+         echo 'eval "$(pyenv init -)"' >> ~/.zshrc
+         ~~~
+         
+         Make sure that your terminal app runs the shell as a login shell.
+
+
+      - **MacOS, if Pyenv is installed with a Git checkout:**
+      
+         ~~~ zsh
+         echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.zprofile
+         echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.zprofile
+         echo 'eval "$(pyenv init --path)"' >> ~/.zprofile
+      
+         echo 'eval "$(pyenv init -)"' >> ~/.zshrc
+         ~~~
+
+         Make sure that your terminal app runs the shell as a login shell.
+
+      - **Other OSes:**
+      
+         ~~~ zsh
+         echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.zprofile
+         echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.zprofile
+         echo 'eval "$(pyenv init --path)"' >> ~/.zprofile
+         
+         echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.profile
+         echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.profile
+         echo 'eval "$(pyenv init --path)"' >> ~/.profile
+
+         echo 'eval "$(pyenv init -)"' >> ~/.zshrc
+         ~~~
+        
+    - For **Fish shell**:
+
+        Execute this interactively:
+        
+        ~~~ fish
+        set -Ux PYENV_ROOT $HOME/.pyenv
+        set -U fish_user_paths $PYENV_ROOT/bin $fish_user_paths
+        ~~~
+
+        And add this to `~/.config/fish/config.fish`:
+        
+        ~~~ fish
+        status is-login; and pyenv init --path | source
+        status is-interactive; and pyenv init - | source
+        ~~~
+
+        If Fish is not your login shell, also follow the Bash/Zsh instructions to add to `~/.profile`.
+
+      **Proxy note**: If you use a proxy, export `http_proxy` and `https_proxy`, too.
+
+
+4. **Restart your login session for the changes to profile files to take effect.**
+   E.g. if you're in a GUI session, you need to fully log out and log back in.
+   
+   In MacOS, restarting terminal windows is enough (because MacOS runs shells
+   in them as login shells by default).
+
+5. [**Install Python build dependencies**](https://github.com/pyenv/pyenv/wiki#suggested-build-environment) before attempting to install a new Python version.
+
+6. **Install Python versions into `$(pyenv root)/versions`.**
+   For example, to download and install Python 2.7.8, run:
+    ```sh
+    pyenv install 2.7.8
+    ```
+   **NOTE:** If you need to pass a `configure` option to a build, please use the
+   ```CONFIGURE_OPTS``` environment variable.
+
+   **NOTE:** If you want to use proxy to download, please set the `http_proxy` and `https_proxy`
+   environment variables.
+
+   **NOTE:** If you are having trouble installing a Python version,
    please visit the wiki page about
-   [Common Build Problems](https://github.com/yyuu/pyenv/wiki/Common-build-problems)
+   [Common Build Problems](https://github.com/pyenv/pyenv/wiki/Common-build-problems).
 
 
 #### Upgrading
 
-If you've installed pyenv using the instructions above, you can
-upgrade your installation at any time using git.
+If you've installed Pyenv using Homebrew, upgrade using:
+```sh
+brew upgrade pyenv
+```
+
+If you've installed Pyenv using the instructions above, you can
+upgrade your installation at any time using Git.
 
 To upgrade to the latest development version of pyenv, use `git pull`:
 
-    $ cd ~/.pyenv
-    $ git pull
+```sh
+cd $(pyenv root)
+git pull
+```
 
-To upgrade to a specific release of pyenv, check out the corresponding tag:
+To upgrade to a specific release of Pyenv, check out the corresponding tag:
 
-    $ cd ~/.pyenv
-    $ git fetch
-    $ git tag
-    v0.1.0
-    $ git checkout v0.1.0
+```sh
+cd $(pyenv root)
+git fetch
+git tag
+git checkout v0.1.0
+```
 
 ### Uninstalling pyenv
 
 The simplicity of pyenv makes it easy to temporarily disable it, or
 uninstall from the system.
 
-1. To **disable** pyenv managing your Python versions, simply remove the
-  `pyenv init` line from your shell startup configuration. This will
-  remove pyenv shims directory from PATH, and future invocations like
-  `python` will execute the system Python version, as before pyenv.
+1. To **disable** Pyenv managing your Python versions, simply remove the
+  `pyenv init` invocations from your shell startup configuration. This will
+  remove Pyenv shims directory from `PATH`, and future invocations like
+  `python` will execute the system Python version, as it was before Pyenv.
 
-  `pyenv` will still be accessible on the command line, but your Python
-  apps won't be affected by version switching.
+   `pyenv` will still be accessible on the command line, but your Python
+   apps won't be affected by version switching.
 
-2. To completely **uninstall** pyenv, perform step (1) and then remove
+2. To completely **uninstall** Pyenv, remove _all_ configuration lines for it
+   from your shell startup configuration, and then remove
    its root directory. This will **delete all Python versions** that were
-   installed under `` `pyenv root`/versions/ `` directory:
+   installed under `` $(pyenv root)/versions/ `` directory:
+   
+   ```sh
+   rm -rf $(pyenv root)
+   ```
 
-        rm -rf `pyenv root`
+   If you've installed Pyenv using a package manager, as a final step,
+   perform the Pyenv package removal. For instance, for Homebrew:
 
-   If you've installed pyenv using a package manager, as a final step
-   perform the pyenv package removal. For instance, for Homebrew:
-
-        brew uninstall pyenv
-
-## Command Reference
-
-### Homebrew on Mac OS X
-
-You can also install pyenv using the [Homebrew](http://brew.sh)
-package manager for Mac OS X.
-
-    $ brew update
-    $ brew install pyenv
-
-
-To upgrade pyenv in the future, use `upgrade` instead of `install`.
-
-After installation, you'll need to add `eval "$(pyenv init -)"` to your profile (as stated in the caveats displayed by Homebrew — to display them again, use `brew info pyenv`). You only need to add that to your profile once.
-
-Then follow the rest of the post-installation steps under "Basic GitHub Checkout" above, starting with #4 ("restart your shell so the path changes take effect").
+   ```
+   brew uninstall pyenv
+   ```
 
 ### Advanced Configuration
 
@@ -291,36 +487,67 @@ Skip this section unless you must know what every line in your shell
 profile is doing.
 
 `pyenv init` is the only command that crosses the line of loading
-extra commands into your shell. Coming from rvm, some of you might be
-opposed to this idea. Here's what `pyenv init` actually does:
+extra commands into your shell. Coming from RVM, some of you might be
+opposed to this idea.
 
-1. **Sets up your shims path.** This is the only requirement for pyenv to
-   function properly. You can do this by hand by prepending
-   `~/.pyenv/shims` to your `$PATH`.
+Also see the [Environment variables](#environment-variables) section
+for the environment variables that control Pyenv's behavior.
 
-2. **Installs autocompletion.** This is entirely optional but pretty
-   useful. Sourcing `~/.pyenv/completions/pyenv.bash` will set that
-   up. There is also a `~/.pyenv/completions/pyenv.zsh` for Zsh
-   users.
 
-3. **Rehashes shims.** From time to time you'll need to rebuild your
-   shim files. Doing this on init makes sure everything is up to
-   date. You can always run `pyenv rehash` manually.
+* `eval "$(pyenv init --path)"`:
 
-4. **Installs the sh dispatcher.** This bit is also optional, but allows
-   pyenv and plugins to change variables in your current shell, making
-   commands like `pyenv shell` possible. The sh dispatcher doesn't do
-   anything crazy like override `cd` or hack your shell prompt, but if
-   for some reason you need `pyenv` to be a real script rather than a
-   shell function, you can safely skip it.
+   1. **Sets up your shims path.** This is the only requirement for pyenv to
+      function properly. You can do this by hand by prepending
+      `$(pyenv root)/shims` to your `$PATH`.
+   
+   `eval "$(pyenv init --path)"` is supposed to be run in your session's login
+   shell startup script -- so that all processes in the session get access to
+   Pyenv's functionality and it only runs once,
+   avoiding breaking `PATH` in nested shells
+   (e.g. shells started from editors/IDEs).
+   
+   In Linux, GUI managers typically act as a `sh` login shell, running
+   `/etc/profile` and `~/.profile` at their startup. MacOS' GUI doesn't do that,
+   so its terminal emulator apps run their shells as login shells by default
+   to compensate.
 
-To see exactly what happens under the hood for yourself, run `pyenv init -`.
 
+* `eval "$(pyenv init -)"`:
+
+   1. **Installs autocompletion.** This is entirely optional but pretty
+      useful. Sourcing `$(pyenv root)/completions/pyenv.bash` will set that
+      up. There is also a `$(pyenv root)/completions/pyenv.zsh` for Zsh
+      users.
+
+   2. **Rehashes shims.** From time to time you'll need to rebuild your
+      shim files. Doing this on init makes sure everything is up to
+      date. You can always run `pyenv rehash` manually.
+
+   3. **Installs `pyenv` into the current shell as a shell function.**
+      This bit is also optional, but allows
+      pyenv and plugins to change variables in your current shell, making
+      commands like `pyenv shell` possible. The sh dispatcher doesn't do
+      anything crazy like override `cd` or hack your shell prompt, but if
+      for some reason you need `pyenv` to be a real script rather than a
+      shell function, you can safely skip it.
+      
+   `eval "$(pyenv init -)"` is supposed to run at any interactive shell's
+   startup (including nested shells) so that you get completion and
+   convenience shell functions.
+
+To see exactly what happens under the hood for yourself, run `pyenv init -`
+or `pyenv init --path`.
+
+If you don't want to use `pyenv init` and shims, you can still benefit
+from pyenv's ability to install Python versions for you. Just run
+`pyenv install` and you will find versions installed in
+`$(pyenv root)/versions`, which you can manually execute or symlink
+as required.
 
 ### Uninstalling Python Versions
 
 As time goes on, you will accumulate Python versions in your
-`~/.pyenv/versions` directory.
+`$(pyenv root)/versions` directory.
 
 To remove old Python versions, `pyenv uninstall` command to automate
 the removal process.
@@ -346,26 +573,37 @@ You can affect how pyenv operates with the following settings:
 
 name | default | description
 -----|---------|------------
-`PYENV_VERSION` | | Specifies the Python version to be used.<br>Also see [`pyenv shell`](#pyenv-shell)
+`PYENV_VERSION` | | Specifies the Python version to be used.<br>Also see [`pyenv shell`](https://github.com/pyenv/pyenv/blob/master/COMMANDS.md#pyenv-shell)
 `PYENV_ROOT` | `~/.pyenv` | Defines the directory under which Python versions and shims reside.<br>Also see `pyenv root`
 `PYENV_DEBUG` | | Outputs debug information.<br>Also as: `pyenv --debug <subcommand>`
 `PYENV_HOOK_PATH` | [_see wiki_][hooks] | Colon-separated list of paths searched for pyenv hooks.
 `PYENV_DIR` | `$PWD` | Directory to start searching for `.python-version` files.
+`PYTHON_BUILD_ARIA2_OPTS` | | Used to pass additional parameters to [`aria2`](https://aria2.github.io/).<br>If the `aria2c` binary is available on PATH, pyenv uses `aria2c` instead of `curl` or `wget` to download the Python Source code. If you have an unstable internet connection, you can use this variable to instruct `aria2` to accelerate the download.<br>In most cases, you will only need to use `-x 10 -k 1M` as value to `PYTHON_BUILD_ARIA2_OPTS` environment variable
+
+
 
 ## Development
 
 The pyenv source code is [hosted on
-GitHub](https://github.com/yyuu/pyenv).  It's clean, modular,
+GitHub](https://github.com/pyenv/pyenv).  It's clean, modular,
 and easy to understand, even if you're not a shell hacker.
 
-Tests are executed using [Bats](https://github.com/sstephenson/bats):
+Tests are executed using [Bats](https://github.com/bats-core/bats-core):
 
-    $ bats test
-    $ bats/test/<file>.bats
+    bats test
+    bats/test/<file>.bats
 
 Please feel free to submit pull requests and file bugs on the [issue
-tracker](https://github.com/yyuu/pyenv/issues).
+tracker](https://github.com/pyenv/pyenv/issues).
 
 
-  [pyenv-virtualenv]: https://github.com/yyuu/pyenv-virtualenv#readme
-  [hooks]: https://github.com/yyuu/pyenv/wiki/Authoring-plugins#pyenv-hooks
+  [pyenv-virtualenv]: https://github.com/pyenv/pyenv-virtualenv#readme
+  [hooks]: https://github.com/pyenv/pyenv/wiki/Authoring-plugins#pyenv-hooks
+
+### Version History
+
+See [CHANGELOG.md](CHANGELOG.md).
+
+### License
+
+[The MIT License](LICENSE)

completions/pyenv.fish

@@ -18,5 +18,6 @@ end
 
 complete -f -c pyenv -n '__fish_pyenv_needs_command' -a '(pyenv commands)'
 for cmd in (pyenv commands)
-  complete -f -c pyenv -n "__fish_pyenv_using_command $cmd" -a "(pyenv completions $cmd)"
+  complete -f -c pyenv -n "__fish_pyenv_using_command $cmd" -a \
+    "(pyenv completions (commandline -opc)[2..-1])"
 end

libexec/pyenv

@@ -1,6 +1,5 @@
 #!/usr/bin/env bash
 set -e
-unset CDPATH
 
 if [ "$1" = "--debug" ]; then
   export PYENV_DEBUG=1
@@ -8,7 +7,8 @@ if [ "$1" = "--debug" ]; then
 fi
 
 if [ -n "$PYENV_DEBUG" ]; then
-  export PS4='+ [${BASH_SOURCE##*/}:${LINENO}] '
+  # https://wiki-dev.bash-hackers.org/scripting/debuggingtips#making_xtrace_more_useful
+  export PS4='+(${BASH_SOURCE}:${LINENO}): ${FUNCNAME[0]:+${FUNCNAME[0]}(): }'
   set -x
 fi
 
@@ -22,13 +22,14 @@ abort() {
 
 if enable -f "${BASH_SOURCE%/*}"/../libexec/pyenv-realpath.dylib realpath 2>/dev/null; then
   abs_dirname() {
-    local path="$(realpath "$1")"
+    local path
+    path="$(realpath "$1")"
     echo "${path%/*}"
   }
 else
   [ -z "$PYENV_NATIVE_EXT" ] || abort "failed to load \`realpath' builtin"
 
-  READLINK=$(type -p greadlink readlink | head -1)
+  READLINK=$(type -P greadlink readlink | head -1)
   [ -n "$READLINK" ] || abort "cannot find readlink - are you missing GNU coreutils?"
 
   resolve_link() {
@@ -36,17 +37,21 @@ else
   }
 
   abs_dirname() {
-    local cwd="$PWD"
     local path="$1"
 
+    # Use a subshell to avoid changing the current path
+    (
     while [ -n "$path" ]; do
-      cd "${path%/*}"
-      local name="${path##*/}"
+      cd_path="${path%/*}"
+      if [[ "$cd_path" != "$path" ]]; then
+        cd "$cd_path"
+      fi
+      name="${path##*/}"
       path="$(resolve_link "$name" || true)"
     done
 
-    pwd
-    cd "$cwd"
+    echo "$PWD"
+    )
   }
 fi
 
@@ -57,35 +62,31 @@ else
 fi
 export PYENV_ROOT
 
-# Transfer PYENV_FILE_ARG (from shims) into PYENV_DIR.
 if [ -z "${PYENV_DIR}" ]; then
-  if [ -n "${PYENV_FILE_ARG}" ]; then
-    if [ -L "${PYENV_FILE_ARG}" ]; then
-      PYENV_DIR="$(abs_dirname "${PYENV_FILE_ARG}")"
-    else
-      PYENV_DIR="${PYENV_FILE_ARG%/*}"
-    fi
-    export PYENV_DIR
-    unset PYENV_FILE_ARG
-  fi
+  PYENV_DIR="$PWD"
 fi
 
-if [ -z "${PYENV_DIR}" ]; then
-  PYENV_DIR="$PWD"
-else
-  cd "$PYENV_DIR" 2>/dev/null || abort "cannot change working directory to \`$PYENV_DIR'"
-  PYENV_DIR="$PWD"
-  cd "$OLDPWD"
+if [ ! -d "$PYENV_DIR" ] || [ ! -e "$PYENV_DIR" ]; then
+  abort "cannot change working directory to \`$PYENV_DIR'"
 fi
+
+PYENV_DIR=$(cd "$PYENV_DIR" && echo "$PWD")
 export PYENV_DIR
 
 
 shopt -s nullglob
 
 bin_path="$(abs_dirname "$0")"
-for plugin_bin in "${PYENV_ROOT}/plugins/"*/bin; do
+for plugin_bin in "${bin_path%/*}"/plugins/*/bin; do
   PATH="${plugin_bin}:${PATH}"
 done
+# PYENV_ROOT can be set to anything, so it may happen to be equal to the base path above,
+# resulting in duplicate PATH entries
+if [ "${bin_path%/*}" != "$PYENV_ROOT" ]; then
+  for plugin_bin in "${PYENV_ROOT}"/plugins/*/bin; do
+    PATH="${plugin_bin}:${PATH}"
+  done
+fi
 export PATH="${bin_path}:${PATH}"
 
 PYENV_HOOK_PATH="${PYENV_HOOK_PATH}:${PYENV_ROOT}/pyenv.d"
@@ -118,7 +119,13 @@ case "$command" in
   ;;
 * )
   command_path="$(command -v "pyenv-$command" || true)"
-  [ -n "$command_path" ] || abort "no such command \`$command'"
+  if [ -z "$command_path" ]; then
+    if [ "$command" == "shell" ]; then
+      abort "shell integration not enabled. Run \`pyenv init' for instructions."
+    else
+      abort "no such command \`$command'"
+    fi
+  fi
 
   shift 1
   if [ "$1" = --help ]; then

libexec/pyenv---version

@@ -12,7 +12,7 @@
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x
 
-version="1.0.2"
+version="2.2.3"
 git_revision=""
 
 if cd "${BASH_SOURCE%/*}" 2>/dev/null && git remote -v 2>/dev/null | grep -q pyenv; then

libexec/pyenv-commands

@@ -28,15 +28,15 @@ shopt -s nullglob
     for command in "${path}/pyenv-"*; do
       command="${command##*pyenv-}"
       if [ -n "$sh" ]; then
-        if [ ${command:0:3} = "sh-" ]; then
-          echo ${command##sh-}
+        if [ "${command:0:3}" = "sh-" ]; then
+          echo "${command##sh-}"
         fi
       elif [ -n "$nosh" ]; then
-        if [ ${command:0:3} != "sh-" ]; then
-          echo ${command##sh-}
+        if [ "${command:0:3}" != "sh-" ]; then
+          echo "${command##sh-}"
         fi
       else
-        echo ${command##sh-}
+        echo "${command##sh-}"
       fi
     done
   done

libexec/pyenv-exec

@@ -8,10 +8,10 @@
 # version's `bin' directory is at the front.
 #
 # For example, if the currently selected Python version is 2.7.6:
-#   pyenv exec pip install -rrequirements.txt
+#   pyenv exec pip install -r requirements.txt
 #
 # is equivalent to:
-#   PATH="$PYENV_ROOT/versions/2.7.6/bin:$PATH" pip install -rrequirements.txt
+#   PATH="$PYENV_ROOT/versions/2.7.6/bin:$PATH" pip install -r requirements.txt
 
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x
@@ -41,7 +41,8 @@ for script in "${scripts[@]}"; do
 done
 
 shift 1
-# CPython's `sys.executable` requires the `PYENV_BIN_PATH` to be at the top of the `PATH`.
-# https://github.com/yyuu/pyenv/issues/98
-export PATH="${PYENV_BIN_PATH}:${PATH}"
-exec -a "$PYENV_COMMAND" "$PYENV_COMMAND_PATH" "$@"
+if [ "${PYENV_BIN_PATH#${PYENV_ROOT}}" != "${PYENV_BIN_PATH}" ]; then
+  # Only add to $PATH for non-system version.
+  export PATH="${PYENV_BIN_PATH}:${PATH}"
+fi
+exec "$PYENV_COMMAND_PATH" "$@"

libexec/pyenv-global

@@ -1,16 +1,24 @@
 #!/usr/bin/env bash
 #
-# Summary: Set or show the global Python version
+# Summary: Set or show the global Python version(s)
 #
-# Usage: pyenv global <version>
+# Usage: pyenv global <version> <version2> <..>
 #
-# Sets the global Python version. You can override the global version at
+# Sets the global Python version(s). You can override the global version at
 # any time by setting a directory-specific version with `pyenv local'
 # or by setting the `PYENV_VERSION' environment variable.
 #
-# <version> should be a string matching a Python version known to pyenv.
-# The special version string `system' will use your default system Python.
-# Run `pyenv versions' for a list of available Python versions.
+# <version> can be specified multiple times and should be a version
+# tag known to pyenv.  The special version string `system' will use
+# your default system Python.  Run `pyenv versions' for a list of
+# available Python versions.
+#
+# Example: To enable the python2.7 and python3.7 shims to find their
+#          respective executables you could set both versions with:
+#
+# 'pyenv global 3.7.0 2.7.15'
+#
+
 
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x

libexec/pyenv-help

@@ -27,6 +27,8 @@ command_path() {
 }
 
 extract_initial_comment_block() {
+  LC_ALL= \
+  LC_CTYPE=C \
   sed -ne "
     /^#/ !{
       q
@@ -42,7 +44,9 @@ extract_initial_comment_block() {
 }
 
 collect_documentation() {
-  $(type -p gawk awk | head -1) '
+  # `tail` prevents "broken pipe" errors due to `head` closing thge pipe without reading everything
+  # https://superuser.com/questions/554855/how-can-i-fix-a-broken-pipe-error/642932#642932
+  $(type -P gawk awk | tail -n +1 | head -1) '
     /^Summary:/ {
       summary = substr($0, 10)
       next
@@ -86,7 +90,8 @@ collect_documentation() {
 }
 
 documentation_for() {
-  local filename="$(command_path "$1")"
+  local filename
+  filename="$(command_path "$1")"
   if [ -n "$filename" ]; then
     extract_initial_comment_block < "$filename" | collect_documentation
   fi
@@ -114,7 +119,7 @@ print_help() {
   eval "$(documentation_for "$command")"
   [ -n "$help" ] || help="$summary"
 
-  if [ -n "$usage" -o -n "$summary" ]; then
+  if [ -n "$usage" ] || [ -n "$summary" ]; then
     if [ -n "$usage" ]; then
       echo "$usage"
     else
@@ -149,10 +154,10 @@ if [ -z "$1" ] || [ "$1" == "pyenv" ]; then
   [ -z "$usage" ] || exit
   echo
   echo "Some useful pyenv commands are:"
-  print_summaries commands local global shell install uninstall rehash version versions which whence
+  print_summaries $(exec pyenv-commands | sort -u)
   echo
   echo "See \`pyenv help <command>' for information on a specific command."
-  echo "For full documentation, see: https://github.com/yyuu/pyenv#readme"
+  echo "For full documentation, see: https://github.com/pyenv/pyenv#readme"
 else
   command="$1"
   if [ -n "$(command_path "$command")" ]; then

libexec/pyenv-hooks

@@ -26,7 +26,7 @@ if ! enable -f "${BASH_SOURCE%/*}"/pyenv-realpath.dylib realpath 2>/dev/null; th
     echo "pyenv: failed to load \`realpath' builtin" >&2
     exit 1
   fi
-READLINK=$(type -p greadlink readlink | head -1)
+READLINK=$(type -P greadlink readlink | head -1)
 if [ -z "$READLINK" ]; then
   echo "pyenv: cannot find readlink - are you missing GNU coreutils?" >&2
   exit 1
@@ -37,10 +37,10 @@ resolve_link() {
 }
 
 realpath() {
-  local cwd="$PWD"
   local path="$1"
   local name
-
+  # Use a subshell to avoid changing the current path
+  (
   while [ -n "$path" ]; do
     name="${path##*/}"
     [ "$name" = "$path" ] || cd "${path%/*}"
@@ -48,7 +48,7 @@ realpath() {
   done
 
   echo "${PWD}/$name"
-  cd "$cwd"
+  )
 }
 fi
 

libexec/pyenv-init

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 # Summary: Configure the shell environment for pyenv
-# Usage: eval "$(pyenv init - [--no-rehash] [<shell>])"
+# Usage: eval "$(pyenv init [-|--path] [--no-rehash] [<shell>])"
 
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x
@@ -8,6 +8,7 @@ set -e
 # Provide pyenv completions
 if [ "$1" = "--complete" ]; then
   echo -
+  echo --path
   echo --no-rehash
   echo bash
   echo fish
@@ -16,15 +17,20 @@ if [ "$1" = "--complete" ]; then
   exit
 fi
 
-print=""
+mode="help"
 no_rehash=""
 for args in "$@"
 do
   if [ "$args" = "-" ]; then
-    print=1
+    mode="print"
     shift
   fi
 
+  if [ "$args" = "--path" ]; then
+    mode="path"
+    shift
+  fi
+  
   if [ "$args" = "--no-rehash" ]; then
     no_rehash=1
     shift
@@ -38,120 +44,150 @@ if [ -z "$shell" ]; then
   shell="${shell##-}"
   shell="${shell:-$SHELL}"
   shell="${shell##*/}"
+  shell="${shell%%-*}"
 fi
 
 root="${0%/*}/.."
 
-if [ -z "$print" ]; then
+function main() {
+  case "$mode" in
+  "help")
+    help_
+    exit 1
+    ;;
+  "path")
+    print_path
+    exit 0
+    ;;
+  "print")
+    init_dirs
+    print_env
+    print_completion
+    print_shell_function
+    exit 0
+    ;;
+  esac
+  # should never get here
+  exit 2
+}
+
+function help_() {
   case "$shell" in
   bash )
-    if [ -f "${HOME}/.bashrc" ] && [ ! -f "${HOME}/.bash_profile" ]; then
-      profile='~/.bashrc'
-    else
-      profile='~/.bash_profile'
-    fi
+    profile='~/.bash_profile'
+    rc='~/.bashrc'
     ;;
   zsh )
-    profile='~/.zshrc'
+    profile='~/.zprofile'
+    rc='~/.zshrc'
     ;;
   ksh )
     profile='~/.profile'
-    ;;
-  fish )
-    profile='~/.config/fish/config.fish'
+    rc='~/.profile'
     ;;
   * )
-    profile='your profile'
+    profile='your shell'\''s login startup file'
+    rc='your shell'\''s interactive startup file'
     ;;
   esac
 
-  { echo "# Load pyenv automatically by appending"
-    echo "# the following to ${profile}:"
+  {
     echo
-    case "$shell" in
+    echo '# See the README for instructions on how to set up'
+    echo '# your shell environment for Pyenv.'
+    echo 
+  } >&2
+}
+
+function init_dirs() {
+  mkdir -p "${PYENV_ROOT}/"{shims,versions}
+}
+
+function print_path() {
+  # Need to use the login shell rather than the current one
+  case "$shell" in
     fish )
-      echo 'status --is-interactive; and source (pyenv init -|psub)'
+      echo "set -gx PATH '${PYENV_ROOT}/shims' \$PATH"
       ;;
     * )
-      echo 'eval "$(pyenv init -)"'
+      echo 'export PATH="'${PYENV_ROOT}'/shims:${PATH}"'
       ;;
-    esac
-    echo
-  } >&2
-
-  exit 1
-fi
-
-mkdir -p "${PYENV_ROOT}/"{shims,versions}
-
-case "$shell" in
-fish )
-  echo "setenv PATH '${PYENV_ROOT}/shims' \$PATH"
-  echo "setenv PYENV_SHELL $shell"
-;;
-* )
-  echo 'export PATH="'${PYENV_ROOT}'/shims:${PATH}"'
-  echo "export PYENV_SHELL=$shell"
-;;
-esac
-
-completion="${root}/completions/pyenv.${shell}"
-if [ -r "$completion" ]; then
-  case "$shell" in
-  fish ) echo ". '$completion'" ;;
-  *    ) echo "source '$completion'" ;;
   esac
-fi
+}
 
-if [ -z "$no_rehash" ]; then
-  echo 'command pyenv rehash 2>/dev/null'
-fi
+function print_env() {
+  case "$shell" in
+  fish )
+    echo "set -gx PYENV_SHELL $shell"
+    ;;
+  * )
+    echo "export PYENV_SHELL=$shell"
+    ;;
+  esac
+}
 
-commands=(`pyenv-commands --sh`)
-case "$shell" in
-fish )
-  cat <<EOS
+function print_completion() {
+  completion="${root}/completions/pyenv.${shell}"
+  if [ -r "$completion" ]; then
+    echo "source '$completion'"
+  fi
+
+  if [ -z "$no_rehash" ]; then
+    echo 'command pyenv rehash 2>/dev/null'
+  fi
+}
+
+function print_shell_function() {
+  commands=(`pyenv-commands --sh`)
+  case "$shell" in
+  fish )
+    cat <<EOS
 function pyenv
   set command \$argv[1]
   set -e argv[1]
 
   switch "\$command"
   case ${commands[*]}
-    . (pyenv "sh-\$command" \$argv|psub)
+    source (pyenv "sh-\$command" \$argv|psub)
   case '*'
     command pyenv "\$command" \$argv
   end
 end
 EOS
-  ;;
-ksh )
-  cat <<EOS
+    ;;
+  ksh )
+    cat <<EOS
 function pyenv {
   typeset command
 EOS
-  ;;
-* )
-  cat <<EOS
+    ;;
+  * )
+    cat <<EOS
 pyenv() {
   local command
 EOS
-  ;;
-esac
+    ;;
+  esac
 
-if [ "$shell" != "fish" ]; then
-IFS="|"
-cat <<EOS
-  command="\$1"
+  if [ "$shell" != "fish" ]; then
+    IFS="|"
+    cat <<EOS
+  command="\${1:-}"
   if [ "\$#" -gt 0 ]; then
     shift
   fi
 
   case "\$command" in
   ${commands[*]})
-    eval "\$(pyenv "sh-\$command" "\$@")";;
+    eval "\$(pyenv "sh-\$command" "\$@")"
+    ;;
   *)
-    command pyenv "\$command" "\$@";;
+    command pyenv "\$command" "\$@"
+    ;;
   esac
 }
 EOS
-fi
+  fi
+}
+
+main

libexec/pyenv-local

@@ -1,11 +1,11 @@
 #!/usr/bin/env bash
 #
-# Summary: Set or show the local application-specific Python version
+# Summary: Set or show the local application-specific Python version(s)
 #
-# Usage: pyenv local <version>
+# Usage: pyenv local <version> <version2> <..>
 #        pyenv local --unset
 #
-# Sets the local application-specific Python version by writing the
+# Sets the local application-specific Python version(s) by writing the
 # version name to a file named `.python-version'.
 #
 # When you run a Python command, pyenv will look for a `.python-version'
@@ -15,9 +15,16 @@
 # `PYENV_VERSION' environment variable takes precedence over local
 # and global versions.
 #
-# <version> should be a string matching a Python version known to pyenv.
-# The special version string `system' will use your default system Python.
-# Run `pyenv versions' for a list of available Python versions.
+# <version> can be specified multiple times and should be a version
+# tag known to pyenv.  The special version string `system' will use
+# your default system Python.  Run `pyenv versions' for a list of
+# available Python versions.
+#
+# Example: To enable the python2.7 and python3.7 shims to find their
+#          respective executables you could set both versions with:
+#
+# 'pyenv local 3.7.0 2.7.15'
+
 
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x

libexec/pyenv-prefix

@@ -30,8 +30,12 @@ OLDIFS="$IFS"
 { IFS=:
   for version in ${PYENV_VERSION}; do
     if [ "$version" = "system" ]; then
-      if PYTHON_PATH="$(PYENV_VERSION="${version}" pyenv-which python 2>/dev/null)"; then
-        PYENV_PREFIX_PATH="${PYTHON_PATH%/bin/*}"
+      if PYTHON_PATH="$(PYENV_VERSION="${version}" pyenv-which python 2>/dev/null)" || \
+          PYTHON_PATH="$(PYENV_VERSION="${version}" pyenv-which python3 2>/dev/null)" || \
+          PYTHON_PATH="$(PYENV_VERSION="${version}" pyenv-which python2 2>/dev/null)"; then
+        shopt -s extglob
+        # In some distros (Arch), Python can be found in sbin as well as bin
+        PYENV_PREFIX_PATH="${PYTHON_PATH%/?(s)bin/*}"
         PYENV_PREFIX_PATH="${PYENV_PREFIX_PATH:-/}"
       else
         echo "pyenv: system version not found in PATH" >&2

libexec/pyenv-rehash

@@ -10,30 +10,52 @@ PROTOTYPE_SHIM_PATH="${SHIM_PATH}/.pyenv-shim"
 # Create the shims directory if it doesn't already exist.
 mkdir -p "$SHIM_PATH"
 
-# Ensure only one instance of pyenv-rehash is running at a time by
-# setting the shell's `noclobber` option and attempting to write to
-# the prototype shim file. If the file already exists, print a warning
-# to stderr and exit with a non-zero status.
-set -o noclobber
-{ echo > "$PROTOTYPE_SHIM_PATH"
-} 2>/dev/null ||
-{ if [ -w "$SHIM_PATH" ]; then
-    echo "pyenv: cannot rehash: $PROTOTYPE_SHIM_PATH exists"
-  else
-    echo "pyenv: cannot rehash: $SHIM_PATH isn't writable"
-  fi
-  exit 1
-} >&2
-set +o noclobber
+acquire_lock() {
+  # Ensure only one instance of pyenv-rehash is running at a time by
+  # setting the shell's `noclobber` option and attempting to write to
+  # the prototype shim file. If the file already exists, print a warning
+  # to stderr and exit with a non-zero status.
+  local ret
+  set -o noclobber
+  echo > "$PROTOTYPE_SHIM_PATH" 2>| /dev/null || ret=1
+  set +o noclobber
+  [ -z "${ret}" ]
+}
 
 # If we were able to obtain a lock, register a trap to clean up the
 # prototype shim when the process exits.
-trap remove_prototype_shim EXIT
+trap release_lock EXIT
 
 remove_prototype_shim() {
   rm -f "$PROTOTYPE_SHIM_PATH"
 }
 
+release_lock() {
+  remove_prototype_shim
+}
+
+if [ ! -w "$SHIM_PATH" ]; then
+  echo "pyenv: cannot rehash: $SHIM_PATH isn't writable"
+  exit 1
+fi
+
+unset acquired
+start=$SECONDS
+while (( SECONDS <= start + ${PYENV_REHASH_TIMEOUT:-60} )); do
+  if acquire_lock 2>/dev/null; then
+    acquired=1
+    break
+  else
+    # POSIX sleep(1) doesn't provide subsecond precision, but many others do
+    sleep 0.1 2>/dev/null || sleep 1
+  fi
+done
+
+if [ -z "${acquired}" ]; then
+  echo "pyenv: cannot rehash: $PROTOTYPE_SHIM_PATH exists"
+  exit 1
+fi
+
 # The prototype shim file is a script that re-execs itself, passing
 # its filename and any arguments to `pyenv exec`. This file is
 # hard-linked for every executable and then removed. The linking
@@ -46,19 +68,6 @@ set -e
 [ -n "\$PYENV_DEBUG" ] && set -x
 
 program="\${0##*/}"
-if [[ "\$program" = "python"* ]]; then
-  for arg; do
-    case "\$arg" in
-    -c* | -- ) break ;;
-    */* )
-      if [ -f "\$arg" ]; then
-        export PYENV_FILE_ARG="\$arg"
-        break
-      fi
-      ;;
-    esac
-  done
-fi
 
 export PYENV_ROOT="$PYENV_ROOT"
 exec "$(command -v pyenv)" exec "\$program" "\$@"
@@ -83,7 +92,7 @@ remove_outdated_shims() {
 list_executable_names() {
   local version file
   pyenv-versions --bare --skip-aliases | \
-  while read version; do
+  while read -r version; do
     for file in "${PYENV_ROOT}/versions/${version}/bin/"*; do
       echo "${file##*/}"
     done
@@ -101,34 +110,62 @@ make_shims() {
   done
 }
 
-registered_shims=" "
+if ((${BASH_VERSINFO[0]} > 3)); then
 
-# Registers the name of a shim to be generated.
-register_shim() {
-  registered_shims="${registered_shims}${1} "
-}
+  declare -A registered_shims
 
-# Install all the shims registered via `make_shims` or `register_shim` directly.
-install_registered_shims() {
-  local shim file
-  for shim in $registered_shims; do
-    file="${SHIM_PATH}/${shim}"
-    [ -e "$file" ] || cp "$PROTOTYPE_SHIM_PATH" "$file"
-  done
-}
+  # Registers the name of a shim to be generated.
+  register_shim() {
+    registered_shims["$1"]=1
+  }
 
-# Once the registered shims have been installed, we make a second pass
-# over the contents of the shims directory. Any file that is present
-# in the directory but has not been registered as a shim should be
-# removed.
-remove_stale_shims() {
-  local shim
-  for shim in "$SHIM_PATH"/*; do
-    if [[ "$registered_shims" != *" ${shim##*/} "* ]]; then
-      rm -f "$shim"
-    fi
-  done
-}
+  # Install all shims registered via `make_shims` or `register_shim` directly.
+  install_registered_shims() {
+    local shim file
+    for shim in "${!registered_shims[@]}"; do
+      file="${SHIM_PATH}/${shim}"
+      [ -e "$file" ] || cp "$PROTOTYPE_SHIM_PATH" "$file"
+    done
+  }
+
+  # Once the registered shims have been installed, we make a second pass
+  # over the contents of the shims directory. Any file that is present
+  # in the directory but has not been registered as a shim should be
+  # removed.
+  remove_stale_shims() {
+    local shim
+    for shim in "$SHIM_PATH"/*; do
+      if [[ ! ${registered_shims["${shim##*/}"]} ]]; then
+        rm -f "$shim"
+      fi
+    done
+  }
+
+else # Same for bash < 4.
+
+    registered_shims=" "
+
+    register_shim() {
+      registered_shims="${registered_shims}${1} "
+    }
+
+    install_registered_shims() {
+      local shim file
+      for shim in $registered_shims; do
+        file="${SHIM_PATH}/${shim}"
+        [ -e "$file" ] || cp "$PROTOTYPE_SHIM_PATH" "$file"
+      done
+    }
+
+    remove_stale_shims() {
+      local shim
+      for shim in "$SHIM_PATH"/*; do
+        if [[ "$registered_shims" != *" ${shim##*/} "* ]]; then
+          rm -f "$shim"
+        fi
+      done
+    }
+fi
 
 shopt -s nullglob
 
@@ -136,6 +173,7 @@ shopt -s nullglob
 # executables.
 create_prototype_shim
 remove_outdated_shims
+# shellcheck disable=SC2046
 make_shims $(list_executable_names | sort -u)
 
 

libexec/pyenv-root

@@ -1,3 +1,3 @@
 #!/usr/bin/env bash
 # Summary: Display the root directory where versions and shims are kept
-echo $PYENV_ROOT
+echo "$PYENV_ROOT"

libexec/pyenv-sh-shell

@@ -2,7 +2,8 @@
 #
 # Summary: Set or show the shell-specific Python version
 #
-# Usage: pyenv shell <version>
+# Usage: pyenv shell <version>...
+#        pyenv shell -
 #        pyenv shell --unset
 #
 # Sets a shell-specific Python version by setting the `PYENV_VERSION'
@@ -12,6 +13,11 @@
 # <version> should be a string matching a Python version known to pyenv.
 # The special version string `system' will use your default system Python.
 # Run `pyenv versions' for a list of available Python versions.
+#
+# When `-` is passed instead of the version string, the previously set
+# version will be restored. With `--unset`, the `PYENV_VERSION`
+# environment variable gets unset, restoring the environment to the
+# state before the first `pyenv shell` call.
 
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x
@@ -31,7 +37,7 @@ if [ -z "$versions" ]; then
     echo "pyenv: no shell-specific version configured" >&2
     exit 1
   else
-    echo "echo \"\$PYENV_VERSION\""
+    echo 'echo "$PYENV_VERSION"'
     exit
   fi
 fi
@@ -39,28 +45,76 @@ fi
 if [ "$versions" = "--unset" ]; then
   case "$shell" in
   fish )
+    echo 'set -gu PYENV_VERSION_OLD "$PYENV_VERSION"'
     echo "set -e PYENV_VERSION"
     ;;
   * )
+    echo 'PYENV_VERSION_OLD="${PYENV_VERSION-}"'
     echo "unset PYENV_VERSION"
     ;;
   esac
   exit
 fi
 
+if [ "$versions" = "-" ]; then
+  case "$shell" in
+  fish )
+    cat <<EOS
+if set -q PYENV_VERSION_OLD
+  if [ -n "\$PYENV_VERSION_OLD" ]
+    set PYENV_VERSION_OLD_ "\$PYENV_VERSION"
+    set -gx PYENV_VERSION "\$PYENV_VERSION_OLD"
+    set -gu PYENV_VERSION_OLD "\$PYENV_VERSION_OLD_"
+    set -e PYENV_VERSION_OLD_
+  else
+    set -gu PYENV_VERSION_OLD "\$PYENV_VERSION"
+    set -e PYENV_VERSION
+  end
+else
+  echo "pyenv: PYENV_VERSION_OLD is not set" >&2
+  false
+end
+EOS
+    ;;
+  * )
+    cat <<EOS
+if [ -n "\${PYENV_VERSION_OLD+x}" ]; then
+  if [ -n "\$PYENV_VERSION_OLD" ]; then
+    PYENV_VERSION_OLD_="\$PYENV_VERSION"
+    export PYENV_VERSION="\$PYENV_VERSION_OLD"
+    PYENV_VERSION_OLD="\$PYENV_VERSION_OLD_"
+    unset PYENV_VERSION_OLD_
+  else
+    PYENV_VERSION_OLD="\$PYENV_VERSION"
+    unset PYENV_VERSION
+  fi
+else
+  echo "pyenv: PYENV_VERSION_OLD is not set" >&2
+  false
+fi
+EOS
+    ;;
+  esac
+  exit
+fi
+
 # Make sure the specified version is installed.
 if pyenv-prefix "${versions[@]}" >/dev/null; then
   OLDIFS="$IFS"
   IFS=: version="${versions[*]}"
   IFS="$OLDIFS"
-  case "$shell" in
-  fish )
-    echo "setenv PYENV_VERSION \"${version}\""
-    ;;
-  * )
-    echo "export PYENV_VERSION=\"${version}\""
-    ;;
-  esac
+  if [ "$version" != "$PYENV_VERSION" ]; then
+    case "$shell" in
+    fish )
+      echo 'set -gu PYENV_VERSION_OLD "$PYENV_VERSION"'
+      echo "set -gx PYENV_VERSION \"$version\""
+      ;;
+    * )
+      echo 'PYENV_VERSION_OLD="${PYENV_VERSION-}"'
+      echo "export PYENV_VERSION=\"${version}\""
+      ;;
+    esac
+  fi
 else
   echo "false"
   exit 1

libexec/pyenv-version

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
-# Summary: Show the current Python version and its origin
+# Summary: Show the current Python version(s) and its origin
 #
-# Shows the currently selected Python version and how it was
+# Shows the currently selected Python version(s) and how it was
 # selected. To obtain only the version string, use `pyenv
 # version-name'.
 

libexec/pyenv-version-file

@@ -9,7 +9,7 @@ target_dir="$1"
 find_local_version_file() {
   local root="$1"
   while ! [[ "$root" =~ ^//[^/]*$ ]]; do
-    if [ -e "${root}/.python-version" ]; then
+    if [ -f "${root}/.python-version" ]; then
       echo "${root}/.python-version"
       return 0
     fi

libexec/pyenv-version-file-read

@@ -9,7 +9,7 @@ if [ -e "$VERSION_FILE" ]; then
   # Read the first non-whitespace word from the specified version file.
   # Be careful not to load it whole in case there's something crazy in it.
   IFS="${IFS}"$'\r'
-  words=($(cut -b 1-1024 "$VERSION_FILE" | sed 's/^\s*\(\S\+\).*/\1/'))
+  words=($(cut -b 1-1024 "$VERSION_FILE" | sed -n 's/^[[:space:]]*\([^[:space:]#][^[:space:]]*\).*/\1/p'))
   versions=("${words[@]}")
 
   if [ -n "$versions" ]; then

libexec/pyenv-versions

@@ -33,7 +33,7 @@ if ! enable -f "${BASH_SOURCE%/*}"/pyenv-realpath.dylib realpath 2>/dev/null; th
     exit 1
   fi
 
-  READLINK=$(type -p greadlink readlink | head -1)
+  READLINK=$(type -P greadlink readlink | head -1)
   if [ -z "$READLINK" ]; then
     echo "pyenv: cannot find readlink - are you missing GNU coreutils?" >&2
     exit 1
@@ -44,10 +44,11 @@ if ! enable -f "${BASH_SOURCE%/*}"/pyenv-realpath.dylib realpath 2>/dev/null; th
   }
 
   realpath() {
-    local cwd="$PWD"
     local path="$1"
     local name
 
+    # Use a subshell to avoid changing the current path
+    (
     while [ -n "$path" ]; do
       name="${path##*/}"
       [ "$name" = "$path" ] || cd "${path%/*}"
@@ -55,7 +56,7 @@ if ! enable -f "${BASH_SOURCE%/*}"/pyenv-realpath.dylib realpath 2>/dev/null; th
     done
 
     echo "${PWD}/$name"
-    cd "$cwd"
+    )
   }
 fi
 
@@ -63,16 +64,27 @@ if [ -d "$versions_dir" ]; then
   versions_dir="$(realpath "$versions_dir")"
 fi
 
+if ((${BASH_VERSINFO[0]} > 3)); then
+  declare -A current_versions
+else
+  current_versions=()
+fi
 if [ -n "$bare" ]; then
   hit_prefix=""
   miss_prefix=""
-  current_versions=()
   include_system=""
 else
   hit_prefix="* "
   miss_prefix="  "
   OLDIFS="$IFS"
-  IFS=: current_versions=($(pyenv-version-name || true))
+  IFS=:
+  if ((${BASH_VERSINFO[0]} > 3)); then
+    for i in $(pyenv-version-name || true); do
+      current_versions["$i"]="1"
+    done
+  else
+    current_versions=($(pyenv-version-name || true))
+  fi
   IFS="$OLDIFS"
   include_system="1"
 fi
@@ -92,7 +104,9 @@ exists() {
 }
 
 print_version() {
-  if exists "$1" "${current_versions[@]}"; then
+  if [[ ${BASH_VERSINFO[0]} -ge 4 && ${current_versions["$1"]} ]]; then
+    echo "${hit_prefix}$1 (set by $(pyenv-version-origin))"
+  elif (( ${BASH_VERSINFO[0]} <= 3 )) && exists "$1" "${current_versions[@]}"; then
     echo "${hit_prefix}$1 (set by $(pyenv-version-origin))"
   else
     echo "${miss_prefix}$1"
@@ -101,11 +115,14 @@ print_version() {
 }
 
 # Include "system" in the non-bare output, if it exists
-if [ -n "$include_system" ] && PYENV_VERSION=system pyenv-which python >/dev/null 2>&1; then
+if [ -n "$include_system" ] && \
+    (PYENV_VERSION=system pyenv-which python >/dev/null 2>&1 || \
+     PYENV_VERSION=system pyenv-which python3 >/dev/null 2>&1 || \
+     PYENV_VERSION=system pyenv-which python2 >/dev/null 2>&1) ; then
   print_version system
 fi
 
-shopt -s nullglob
+shopt -s dotglob nullglob
 for path in "$versions_dir"/*; do
   if [ -d "$path" ]; then
     if [ -n "$skip_aliases" ] && [ -L "$path" ]; then
@@ -122,7 +139,7 @@ for path in "$versions_dir"/*; do
     done
   fi
 done
-shopt -u nullglob
+shopt -u dotglob nullglob
 
 if [ "$num_versions" -eq 0 ] && [ -n "$include_system" ]; then
   echo "Warning: no Python detected on the system" >&2

libexec/pyenv-whence

@@ -20,7 +20,7 @@ fi
 
 whence() {
   local command="$1"
-  pyenv-versions --bare | while read version; do
+  pyenv-versions --bare | while read -r version; do
     path="$(pyenv-prefix "$version")/bin/${command}"
     if [ -x "$path" ]; then
       [ "$print_paths" ] && echo "$path" || echo "$version"

libexec/pyenv-which

@@ -2,10 +2,13 @@
 #
 # Summary: Display the full path to an executable
 #
-# Usage: pyenv which <command>
+# Usage: pyenv which <command> [--nosystem]
 #
 # Displays the full path to the executable that pyenv will invoke when
 # you run the given command.
+# Use --nosystem argument in case when you don't need to search command in the 
+# system environment.
+#
 
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x
@@ -15,10 +18,16 @@ if [ "$1" = "--complete" ]; then
   exec pyenv-shims --short
 fi
 
+if [ "$2" = "--nosystem" ]; then
+  system=""
+else
+  system="system"
+fi
+
 remove_from_path() {
   local path_to_remove="$1"
   local path_before
-  local result=":$PATH:"
+  local result=":${PATH//\~/$HOME}:"
   while [ "$path_before" != "$result" ]; do
     path_before="$result"
     result="${result//:$path_to_remove:/:}"
@@ -38,7 +47,7 @@ OLDIFS="$IFS"
 IFS=: versions=(${PYENV_VERSION:-$(pyenv-version-name)})
 IFS="$OLDIFS"
 
-for version in "${versions[@]}"; do
+for version in "${versions[@]}" "$system"; do
   if [ "$version" = "system" ]; then
     PATH="$(remove_from_path "${PYENV_ROOT}/shims")"
     PYENV_COMMAND_PATH="$(command -v "$PYENV_COMMAND" || true)"
@@ -82,6 +91,8 @@ else
       echo "The \`$1' command exists in these Python versions:"
       echo "$versions" | sed 's/^/  /g'
       echo
+      echo "Note: See 'pyenv help global' for tips on allowing both"
+      echo "      python2 and python3 to be found."
     } >&2
   fi
 

man/man1/pyenv.1

@@ -0,0 +1,547 @@
+.TH PYENV 1 "12 Dec 2020" "PYENV"
+.SH NAME
+pyenv \- Simple Python version management
+.SH SYNOPSIS
+.B pyenv
+\fI\,<command> \/\fR[\fI\,<args>\/\fR]
+.SH DESCRIPTION
+pyenv lets you easily switch between multiple versions of Python\. It's simple, unobtrusive, and follows the UNIX tradition of single\-purpose tools that do one thing well\.
+.P
+ To start using pyenv
+.IP "1." 3
+\fBAppend\fR the following to \fB$HOME/.bashrc\fR
+.P
+.RS 15
+source /usr/share/pyenv/pyenv_user_setup.bash
+.RE
+.\"OR
+.\"\fBsh echo \-e \if command \-v pyenv 1>/dev/null 2>&1; then\en eval "$(pyenv init \-)"\enfi' >> ~/\.bashrc\fR
+.RS 3
+.P
+.nh
+Appending this line enables shims. Please make sure this line is placed toward the end of the shell configuration file since it manipulates \fBPATH\fR during the initialization\. 
+.hy
+.TP 13
+.B Debian note:
+Modify only your \fB~/\.bashrc\fR file instead of creating 
+.br
+\fB~/\.bash_profile\fR
+.P
+.RS 0
+\fBZsh note\fR: Modify your \fB~/\.zshrc\fR file instead of  \fB~/\.bashrc\fR
+.P
+\fBWarning\fR: If you configured your system so  that \fBBASH_ENV\fR variable  points to \fB\.bashrc\fR\. You should almost certainly put the above mentioned line  into \fB\.bash_profile\fR, and \fBnot\fR into \fB\.bashrc\fR. Otherwise you may observe strange behaviour, such as \fBpyenv\fR getting into an infinite loop. See #264 
+.UR https://github\.com/pyenv/pyenv/issues/264
+.UE
+for details.
+.RE
+.RE
+.IP "2." 3
+\fBRestart your shell so the path changes take effect\.\fR You can now begin using pyenv\. 
+.P
+.RS 15
+exec "$SHELL"\fR
+.RE
+.IP "3." 3
+\fBInstall Python versions into \fB$(pyenv root)/versions\fR\.\fR For example, to download and install Python 3\.6\.12, run:
+.P
+.RS 15
+.B pyenv install 3.6.12\fR 
+.RE
+.P
+\fBNOTE:\fR If you need to pass configure option to build, please use \fBCONFIGURE_OPTS\fR environment variable. If you are having trouble installing a python version, please visit the wiki page about Common Build Problems
+.UR https://github\.com/pyenv/pyenv/wiki/Common\-build\-problems
+.UE
+.P
+\fBProxy note\fR: If you use a proxy, export \fBHTTP_PROXY\fR and \fBHTTPS_PROXY\fR environment variables.
+.P
+.SS "Stop using pyenv"
+The simplicity of pyenv makes it easy to temporarily disable it, or uninstall from the system\.
+To \fBdisable\fR pyenv managing your Python versions, simply remove the \fBpyenv init\fR line from your shell startup configuration\. This will remove pyenv shims directory from PATH, and future invocations like \fBpython\fR will execute the system Python version, as before pyenv\.
+.IP "" 0
+.P
+\fBpyenv\fR will still be accessible on the command line, but your Python apps won't be affected by version switching\.
+.IP "" 0
+.SH COMMAND LINE OPTIONS
+Like \fBgit\fR, the \fBpyenv\fR command delegates to subcommands based on its first argument\.
+.SS "Some useful pyenv commands are:"
+.TP 5
+.B commands
+List all available pyenv commands
+.TP
+.B exec
+Run an executable with the selected Python version
+.TP
+.B global
+Set or show the global Python version(s)
+.TP
+.B help
+Display help for a command
+.TP
+.B hooks
+List hook scripts for a given pyenv command
+.TP
+.B init
+Configure the shell environment for pyenv
+.TP
+.B install
+Install a Python version using python\-build
+.TP
+.B local
+Set or show the local application\-specific Python version(s)
+.TP
+.B prefix
+Display prefix for a Python version
+.TP
+.B rehash
+Rehash pyenv shims (run this after installing executables)
+.TP
+.B root
+Display the root directory where versions and shims are kept
+.TP
+.B shell
+Set or show the shell\-specific Python version
+.TP
+.B shims
+List existing pyenv shims
+.TP
+.B uninstall
+Uninstall a specific Python version
+.TP
+.B version
+Show the current Python version(s) and its origin
+.TP
+.B version\-file
+Detect the file that sets the current pyenv version
+.TP
+.B version\-name
+Show the current Python version
+.TP
+.B version\-origin
+Explain how the current Python version is set
+.TP
+.B versions
+List all Python versions available to pyenv
+.TP
+.B whence
+List all Python versions that contain the given executable
+.TP
+.B which
+Display the full path to an executable
+.PP
+See `pyenv help <command>' for information on a specific command.
+For full documentation, see \fBCOMMAND REFERENCE\fR section 
+.SH OPTIONS
+.TP
+.B \-h, \-\-help
+Show summary of options.
+.TP
+.B \-v, \-\-version
+Show version of program.
+.SH COMPARISON
+.P
+.B "pyenv does\|\.\|\.\|\.
+.P
+.IP \(bu 4
+Let you \fBchange the global Python version\fR on a per\-user basis\.
+.IP \(bu 4
+Provide support for \fBper\-project Python versions\fR\.
+.IP \(bu 4
+Allow you to \fBoverride the Python version\fR with an environment variable\.
+.IP \(bu 4
+Search commands from \fBmultiple versions of Python at a time\fR\. This may be helpful to test across Python versions with tox
+.IP "" 0
+.P
+.B "In contrast with pythonbrew and pythonz, pyenv does not\|\.\|\.\|\."
+.IP \(bu 4
+\fBDepend on Python itself\.\fR pyenv was made from pure shell scripts\. There is no bootstrap problem of Python\.
+.IP \(bu 4
+\fBNeed to be loaded into your shell\.\fR Instead, pyenv's shim approach works by adding a directory to your \fB$PATH\fR\.
+.IP \(bu 4
+\fBManage virtualenv\.\fR Of course, you can create virtualenv  yourself, or pyenv\-virtualenv  to automate the process\.
+.SH "How It Works"
+At a high level, pyenv intercepts Python commands using shim executables injected into your \fBPATH\fR, determines which Python version has been specified by your application, and passes your commands along to the correct Python installation\.
+.SS "Understanding PATH"
+When you run a command like \fBpython\fR or \fBpip\fR, your operating system searches through a list of directories to find an executable file with that name\. This list of directories lives in an environment variable called \fBPATH\fR, with each directory in the list separated by a colon:
+.IP "" 4
+.nf
+/usr/local/bin:/usr/bin:/bin
+.fi
+.IP "" 0
+.P
+Directories in \fBPATH\fR are searched from left to right, so a matching executable in a directory at the beginning of the list takes precedence over another one at the end\. In this example, the \fB/usr/local/bin\fR directory will be searched first, then \fB/usr/bin\fR, then \fB/bin\fR\.
+.SS "Understanding Shims"
+pyenv works by inserting a directory of \fIshims\fR at the front of your \fBPATH\fR:
+.IP "" 4
+.nf
+$(pyenv root)/shims:/usr/local/bin:/usr/bin:/bin
+.fi
+.IP "" 0
+.P
+Through a process called \fIrehashing\fR, pyenv maintains shims in that directory to match every Python command (\fBpython\fR,\fBpip\fR,etc...) across every installed version of Python 
+.P
+Shims are lightweight executables that simply pass your command along to pyenv\. So with pyenv installed, when you run, say, \fBpip\fR, your operating system will do the following:
+.IP \(bu 4
+Search your \fBPATH\fR for an executable file named \fBpip\fR
+.IP \(bu 4
+Find the pyenv shim named \fBpip\fR at the beginning of your \fBPATH\fR
+.IP \(bu 4
+Run the shim named \fBpip\fR, which in turn passes the command along to pyenv
+.IP "" 0
+.SS "Choosing the Python Version"
+When you execute a shim, pyenv determines which Python version to use by reading it from the following sources, in this order:
+.IP "1." 4
+The \fBPYENV_VERSION\fR environment variable (if specified)\. You can use the \fBpyenv shell\fR command to set this environment variable in your current shell session\.
+.IP "2." 4
+The application\-specific \fB\.python\-version\fR file in the current directory (if present)\. You can modify the current directory's \fB\.python\-version\fR file with the \fBpyenv local\fR command\.
+.IP "3." 4
+The first \fB\.python\-version\fR file found (if any) by searching each parent directory, until reaching the root of your filesystem\.
+.IP "4." 4
+The global \fB$(pyenv root)/version\fR file\. You can modify this file using the \fBpyenv global\fR  command\. If the global version file is not present, pyenv assumes you want to use the "system" Python\. (In other words, whatever version would run if pyenv weren't in your \fBPATH\fR\.)
+.IP "" 0
+.P
+.nh
+\fBNOTE:\fR You can activate multiple versions at the same time, including multiple versions of Python2 or Python3 simultaneously\. This allows for parallel usage of Python2 and Python3, and is required with tools like \fBtox\fR\. For example, to set your path to first use your \fBsystem\fR Python and Python3 (set to 2\.7\.9 and 3\.4\.2 in this example), but also have Python 3\.3\.6, 3\.2, and 2\.5 available on your \fBPATH\fR, one would first \fBpyenv install\fR the missing versions, then set \fBpyenv global system 3\.3\.6 3\.2 2\.5\fR\. At this point, one should be able to find the full executable path to each of these using \fBpyenv which\fR, e\.g\. \fBpyenv which python2\.5\fR (should display \fB$(pyenv root)/versions/2\.5/bin/python2\.5\fR), or \fBpyenv which python3\.4\fR (should display path to system Python3)\. You can also specify multiple versions in a \fB\.python\-version\fR file, separated by newlines or any whitespace\.
+hy
+.SS "Locating the Python Installation"
+Once pyenv has determined which version of Python your application has specified, it passes the command along to the corresponding Python installation\.
+.P
+Each Python version is installed into its own directory under 
+.nf
+\fB$(pyenv root)/versions\fR\.
+.fi
+.P
+For example, you might have these versions installed:
+.IP \(bu 4
+\fB$(pyenv root)/versions/2\.7\.8/\fR
+.IP \(bu 4
+\fB$(pyenv root)/versions/3\.4\.2/\fR
+.IP \(bu 4
+\fB$(pyenv root)/versions/pypy\-2\.4\.0/\fR
+.IP "" 0
+.P
+As far as pyenv is concerned, version names are simply the directories in \fB$(pyenv root)/versions\fR\.
+.SS "Managing Virtual Environments"
+There is a pyenv plugin named pyenv\-virtualenv which comes with various features to help pyenv users to manage virtual environments created by virtualenv or Anaconda\. Because the \fBactivate\fR script of those virtual environments are relying on mutating \fB$PATH\fR variable of user's interactive shell, it will intercept pyenv's shim style command execution hooks\. We'd recommend to install pyenv\-virtualenv as well if you have some plan to play with those virtual environments\.
+
+.SH "Advanced Configuration"
+Skip this section unless you must know what every line in your shell profile is doing\.
+.P
+\fBpyenv init\fR is the only command that crosses the line of loading extra commands into your shell\. Coming from rvm, some of you might be opposed to this idea\. Here's what \fBpyenv init\fR actually does:
+.IP "1." 4
+\fBSets up your shims path\.\fR This is the only requirement for pyenv to function properly\. You can do this by hand by prepending \fB$(pyenv root)/shims\fR to your \fB$PATH\fR\.
+.IP "2." 4
+\fBRehashes shims\.\fR From time to time you'll need to rebuild your shim files\. Doing this on init makes sure everything is up to date\. You can always run \fBpyenv rehash\fR manually\.
+.IP "3." 4
+\fBInstalls the sh dispatcher\.\fR This bit is also optional, but allows pyenv and plugins to change variables in your current shell, making commands like \fBpyenv shell\fR possible\. The sh dispatcher doesn't do anything crazy like override \fBcd\fR or hack your shell prompt, but if for some reason you need \fBpyenv\fR to be a real script rather than a shell function, you can safely skip it\.
+.IP "" 0
+.P
+To see exactly what happens under the hood for yourself, run \fB"pyenv init \-"\fR\.
+.SH "Uninstalling Python Versions"
+As time goes on, you will accumulate Python versions in your \fB$(pyenv root)/versions\fR directory\.
+.P
+To remove old Python versions, \fBpyenv uninstall\fR command to automate the removal process\.
+.P
+Alternatively, simply \fBrm \-rf\fR the directory of the version you want to remove\. You can find the directory of a particular Python version with the \fBpyenv prefix\fR command, 
+.P
+e\.g\. \fBpyenv prefix 2\.6\.8\fR\.
+.SH "Command Reference"
+.P
+The most common subcommands are:
+.SS "pyenv commands"
+Lists all available pyenv commands\.
+.SS "pyenv local"
+Sets a local application\-specific Python version by writing the version name to a \fB\.python\-version\fR file in the current directory\. This version overrides the global version, and can be overridden itself by setting the \fBPYENV_VERSION\fR environment variable or with the \fBpyenv shell\fR command\.
+.IP "" 4
+.nf
+$ pyenv local 2\.7\.6
+.fi
+.IP "" 0
+.P
+When run without a version number, \fBpyenv local\fR reports the currently configured local version\. You can also unset the local version:
+.IP "" 4
+.nf
+$ pyenv local \-\-unset
+.fi
+.IP "" 0
+.P
+Previous versions of pyenv stored local version specifications in a file named \fB\.pyenv\-version\fR\. For backwards compatibility, pyenv will read a local version specified in an \fB\.pyenv\-version\fR file, but a \fB\.python\-version\fR file in the same directory will take precedence\.
+.P
+You can specify multiple versions as local Python at once\.
+.P
+Let's say if you have two versions of 2\.7\.6 and 3\.3\.3\. If you prefer 2\.7\.6 over 3\.3\.3,
+.IP "" 4
+.nf
+$ pyenv local 2\.7\.6 3\.3\.3
+$ pyenv versions
+  system
+* 2\.7\.6 (set by /Users/yyuu/path/to/project/\.python\-version)
+* 3\.3\.3 (set by /Users/yyuu/path/to/project/\.python\-version)
+$ python \-\-version
+Python 2\.7\.6
+$ python2\.7 \-\-version
+Python 2\.7\.6
+$ python3\.3 \-\-version
+Python 3\.3\.3
+.fi
+.IP "" 0
+.P
+or, if you prefer 3\.3\.3 over 2\.7\.6,
+.IP "" 4
+.nf
+$ pyenv local 3\.3\.3 2\.7\.6
+$ pyenv versions
+  system
+* 2\.7\.6 (set by /Users/yyuu/path/to/project/\.python\-version)
+* 3\.3\.3 (set by /Users/yyuu/path/to/project/\.python\-version)
+  venv27
+$ python \-\-version
+Python 3\.3\.3
+$ python2\.7 \-\-version
+Python 2\.7\.6
+$ python3\.3 \-\-version
+Python 3\.3\.3
+.fi
+.IP "" 0
+.SS "pyenv global"
+Sets the global version of Python to be used in all shells by writing the version name to the \fB~/\.pyenv/version\fR file\. This version can be overridden by an application\-specific \fB\.python\-version\fR file, or by setting the \fBPYENV_VERSION\fR environment variable\.
+.IP "" 4
+.nf
+$ pyenv global 2\.7\.6
+.fi
+.IP "" 0
+.P
+The special version name \fBsystem\fR tells pyenv to use the system Python (detected by searching your \fB$PATH\fR)\.
+.P
+When run without a version number, \fBpyenv global\fR reports the currently configured global version\.
+.P
+You can specify multiple versions as global Python at once\.
+.P
+Let's say if you have two versions of 2\.7\.6 and 3\.3\.3\. If you prefer 2\.7\.6 over 3\.3\.3,
+.IP "" 4
+.nf
+$ pyenv global 2\.7\.6 3\.3\.3
+$ pyenv versions
+  system
+* 2\.7\.6 (set by /Users/yyuu/\.pyenv/version)
+* 3\.3\.3 (set by /Users/yyuu/\.pyenv/version)
+$ python \-\-version
+Python 2\.7\.6
+$ python2\.7 \-\-version
+Python 2\.7\.6
+$ python3\.3 \-\-version
+Python 3\.3\.3
+.fi
+.IP "" 0
+.P
+or, if you prefer 3\.3\.3 over 2\.7\.6,
+.IP "" 4
+.nf
+$ pyenv global 3\.3\.3 2\.7\.6
+$ pyenv versions
+  system
+* 2\.7\.6 (set by /Users/yyuu/\.pyenv/version)
+* 3\.3\.3 (set by /Users/yyuu/\.pyenv/version)
+  venv27
+$ python \-\-version
+Python 3\.3\.3
+$ python2\.7 \-\-version
+Python 2\.7\.6
+$ python3\.3 \-\-version
+Python 3\.3\.3
+.fi
+.IP "" 0
+.SS "pyenv shell"
+Sets a shell\-specific Python version by setting the \fBPYENV_VERSION\fR environment variable in your shell\. This version overrides application\-specific versions and the global version\.
+.IP "" 4
+.nf
+$ pyenv shell pypy\-2\.2\.1
+.fi
+.IP "" 0
+.P
+When run without a version number, \fBpyenv shell\fR reports the current value of \fBPYENV_VERSION\fR\. You can also unset the shell version:
+.IP "" 4
+.nf
+$ pyenv shell \-\-unset
+.fi
+.IP "" 0
+.P
+Note that you'll need pyenv's shell integration enabled (step 3 of the installation instructions) in order to use this command\. If you prefer not to use shell integration, you may simply set the \fBPYENV_VERSION\fR variable yourself:
+.IP "" 4
+.nf
+$ export PYENV_VERSION=pypy\-2\.2\.1
+.fi
+.IP "" 0
+.P
+You can specify multiple versions via \fBPYENV_VERSION\fR at once\.
+.P
+Let's say if you have two versions of 2\.7\.6 and 3\.3\.3\. If you prefer 2\.7\.6 over 3\.3\.3,
+.IP "" 4
+.nf
+$ pyenv shell 2\.7\.6 3\.3\.3
+$ pyenv versions
+  system
+* 2\.7\.6 (set by PYENV_VERSION environment variable)
+* 3\.3\.3 (set by PYENV_VERSION environment variable)
+$ python \-\-version
+Python 2\.7\.6
+$ python2\.7 \-\-version
+Python 2\.7\.6
+$ python3\.3 \-\-version
+Python 3\.3\.3
+.fi
+.IP "" 0
+.P
+or, if you prefer 3\.3\.3 over 2\.7\.6,
+.IP "" 4
+.nf
+$ pyenv shell 3\.3\.3 2\.7\.6
+$ pyenv versions
+  system
+* 2\.7\.6 (set by PYENV_VERSION environment variable)
+* 3\.3\.3 (set by PYENV_VERSION environment variable)
+  venv27
+$ python \-\-version
+Python 3\.3\.3
+$ python2\.7 \-\-version
+Python 2\.7\.6
+$ python3\.3 \-\-version
+Python 3\.3\.3
+.fi
+.IP "" 0
+.SS "pyenv install"
+Install a Python version 
+.IP "" 4
+.nf
+Usage: pyenv install [\-f] [\-kvp] <version>
+       pyenv install [\-f] [\-kvp] <definition\-file>
+       pyenv install \-l|\-\-list
+
+  \-l, \-\-list             List all available versions
+  \-f, \-\-force            Install even if the version appears to be installed 
+  					already
+  \-s, \-\-skip\-existing    Skip the installation if the version appears to be
+  					installed already
+
+  python\-build options:
+
+  \-k, \-\-keep        Keep source tree in $PYENV_BUILD_ROOT after installation
+                    (defaults to $PYENV_ROOT/sources)
+  \-v, \-\-verbose     Verbose mode: print compilation status to stdout
+  \-p, \-\-patch       Apply a patch from stdin before building
+  \-g, \-\-debug       Build a debug version
+.fi
+.IP "" 0
+.P
+To list the all available versions of Python, including Anaconda, Jython, pypy, and stackless, use:
+.IP "" 4
+.nf
+$ pyenv install \-\-list
+.fi
+.IP "" 0
+.P
+Then install the desired versions:
+.IP "" 4
+.nf
+$ pyenv install 2\.7\.6
+$ pyenv install 2\.6\.8
+$ pyenv versions
+  system
+  2\.6\.8
+* 2\.7\.6 (set by /home/yyuu/\.pyenv/version)
+.fi
+.IP "" 0
+.SS "pyenv uninstall"
+Uninstall a specific Python version\.
+.IP "" 4
+.nf
+Usage: pyenv uninstall [\-f|\-\-force] <version>
+
+   \-f  Attempt to remove the specified version without prompting
+       for confirmation\. If the version does not exist, do not
+       display an error message\.
+.fi
+.IP "" 0
+.SS "pyenv rehash"
+Installs shims for all Python binaries known to pyenv (i\.e\., \fB~/\.pyenv/versions/*/bin/*\fR)\. Run this command after you install a new version of Python, or install a package that provides binaries\.
+.IP "" 4
+.nf
+$ pyenv rehash
+.fi
+.IP "" 0
+.SS "pyenv version"
+Displays the currently active Python version, along with information on how it was set\.
+.IP "" 4
+.nf
+$ pyenv version
+2\.7\.6 (set by /home/yyuu/\.pyenv/version)
+.fi
+.IP "" 0
+.SS "pyenv versions"
+Lists all Python versions known to pyenv, and shows an asterisk next to the currently active version\.
+.IP "" 4
+.nf
+$ pyenv versions
+  2\.5\.6
+  2\.6\.8
+* 2\.7\.6 (set by /home/yyuu/\.pyenv/version)
+  3\.3\.3
+  jython\-2\.5\.3
+  pypy\-2\.2\.1
+.fi
+.IP "" 0
+.SS "pyenv which"
+Displays the full path to the executable that pyenv will invoke when you run the given command\.
+.IP "" 4
+.nf
+$ pyenv which python3\.3
+/home/yyuu/\.pyenv/versions/3\.3\.3/bin/python3\.3
+.fi
+.IP "" 0
+.SS "pyenv whence"
+Lists all Python versions with the given command installed\.
+.IP "" 4
+.nf
+$ pyenv whence 2to3
+2\.6\.8
+2\.7\.6
+3\.3\.3
+.fi
+.IP "" 0
+.SH "Environment variables"
+You can affect how pyenv operates with the following settings:
+.TP 28
+.B name (default)
+.B description
+.TP 28
+.B PYENV_VERSION
+Specifies the Python version to be used. Also see \fBpyenv shell\fR
+.TP
+.B PYENV_ROOT (\fB~/.pyenv\fR)
+Defines the directory under which Python versions and shims reside. Also see \fBpyenv root\fR
+.TP
+.B PYENV_DEBUG
+Outputs debug information. 
+.br
+Also as: \fBpyenv --debug <subcommand>\fR
+.TP
+.B PYENV_HOOK_PATH
+Colon\-separated list of paths searched for pyenv hooks\.
+.TP
+.B PYENV_DIR (\fB$PWD\fR)
+Directory to start searching for \fB\.python\-version\fR files\.
+.TP
+.B HTTP_PROXY,HTTPS_PROXY
+Proxy Variables
+.TP
+.B CONFIGURE_OPTS
+Pass configure options to build.
+.TP
+.B PYTHON_BUILD_ARIA2_OPTS
+Used to pass additional parameters to \fBaria2\fR 
+.UR https://aria2\.github\.io/
+.UE
+If the \fBaria2c\fR binary is available on PATH, pyenv uses \fBaria2c\fR instead of \fBcurl\fR or \fBwget\fR to download the Python Source code\. If you have an unstable internet connection, you can use this variable to instruct \fBaria2\fR to accelerate the download\.
+In most cases, you will only need to use \fB\-x 10 \-k 1M\fR as value to \fBPYTHON_BUILD_ARIA2_OPTS\fR environment variable
+.SH "License"
+The \fBMIT\fR License

plugins/python-build/README.md

@@ -1,22 +1,22 @@
 # python-build
 
-python-build is a [pyenv](https://github.com/yyuu/pyenv) plugin that
+python-build is a [pyenv](https://github.com/pyenv/pyenv) plugin that
 provides a `pyenv install` command to compile and install different versions
 of Python on UNIX-like systems.
 
 You can also use python-build without pyenv in environments where you need
 precise control over Python version installation.
 
-See the [list of releases](https://github.com/yyuu/pyenv/releases)
+See the [list of releases](https://github.com/pyenv/pyenv/releases)
 for changes in each version.
 
 
 ## Installation
 
-### Installing as an pyenv plugin (recommended)
+### Installing as a pyenv plugin (recommended)
 
-You need nothing to do since python-build is bundled with pyenv by
-default.
+Since python-build is bundled with pyenv by
+default, you do not need to do anything.
 
 ### Installing as a standalone program (advanced)
 
@@ -24,7 +24,7 @@ Installing python-build as a standalone program will give you access to the
 `python-build` command for precise control over Python version installation. If you
 have pyenv installed, you will also be able to use the `pyenv install` command.
 
-    git clone git://github.com/yyuu/pyenv.git
+    git clone git://github.com/pyenv/pyenv.git
     cd pyenv/plugins/python-build
     ./install.sh
 
@@ -55,7 +55,7 @@ Or, if you would like to install the latest development release:
 ## Usage
 
 Before you begin, you should ensure that your build environment has the proper
-system dependencies for compiling the wanted Python Version (see our [recommendations](https://github.com/yyuu/pyenv/wiki#suggested-build-environment)).
+system dependencies for compiling the wanted Python Version (see our [recommendations](https://github.com/pyenv/pyenv/wiki#suggested-build-environment)).
 
 ### Using `pyenv install` with pyenv
 
@@ -93,10 +93,10 @@ Both `pyenv install` and `python-build` accept a path to a custom definition fil
 in place of a version name. Custom definitions let you develop and install
 versions of Python that are not yet supported by python-build.
 
-See the [python-build built-in definitions](https://github.com/yyuu/pyenv/tree/master/plugins/python-build/share/python-build) as a starting point for
+See the [python-build built-in definitions](https://github.com/pyenv/pyenv/tree/master/plugins/python-build/share/python-build) as a starting point for
 custom definition files.
 
-[definitions]: https://github.com/yyuu/pyenv/tree/master/plugins/python-build/share/python-build
+[definitions]: https://github.com/pyenv/pyenv/tree/master/plugins/python-build/share/python-build
 
 ### Special environment variables
 
@@ -109,6 +109,8 @@ You can set certain environment variables to control the build process.
   downloaded package files.
 * `PYTHON_BUILD_MIRROR_URL` overrides the default mirror URL root to one of your
   choosing.
+* `PYTHON_BUILD_MIRROR_URL_SKIP_CHECKSUM`, if set, does not append the SHA2
+  checksum of the file to the mirror URL.
 * `PYTHON_BUILD_SKIP_MIRROR`, if set, forces python-build to download packages from
   their original source URLs instead of using a mirror.
 * `PYTHON_BUILD_ROOT` overrides the default location from where build definitions
@@ -124,7 +126,7 @@ You can set certain environment variables to control the build process.
 * `MAKE_OPTS` (or `MAKEOPTS`) lets you pass additional options to `make`.
 * `MAKE_INSTALL_OPTS` lets you pass additional options to `make install`.
 * `PYTHON_CONFIGURE_OPTS` and `PYTHON_MAKE_OPTS` and `PYTHON_MAKE_INSTALL_OPTS` allow
-  you to specify configure and make options for buildling CPython. These variables
+  you to specify configure and make options for building CPython. These variables
   will be passed to Python only, not any dependent packages (e.g. libyaml).
 
 ### Applying patches to Python before compiling
@@ -152,13 +154,13 @@ $ cat fix1.patch fix2.patch | pyenv install --patch 2.7.10
 You can build CPython with `--enable-shared` to install a version with
 shared object.
 
-If `--enabled-shared` was found in `PYTHON_CONFIGURE_OPTS` or `CONFIGURE_OPTS`,
+If `--enable-shared` was found in `PYTHON_CONFIGURE_OPTS` or `CONFIGURE_OPTS`,
 `python-build` will automatically set `RPATH` to the pyenv's prefix directory.
 This means you don't have to set `LD_LIBRARY_PATH` or `DYLD_LIBRARY_PATH` for
 the version(s) installed with `--enable-shared`.
 
 ```sh
-$ env PYTHON_CONFIGURE_OPTS="--enable-shared` pyenv install 2.7.9
+$ env PYTHON_CONFIGURE_OPTS="--enable-shared" pyenv install 2.7.9
 ```
 
 ### Checksum verification
@@ -175,13 +177,17 @@ definition. (All bundled definitions include checksums.)
 python-build will first attempt to download package files from a mirror hosted on
 GitHub Pages. If a package is not available on the mirror, if the mirror
 is down, or if the download is corrupt, python-build will fall back to the
-official URL specified in the defintion file.
+official URL specified in the definition file.
 
 You can point python-build to another mirror by specifying the
 `PYTHON_BUILD_MIRROR_URL` environment variable--useful if you'd like to run your
 own local mirror, for example. Package mirror URLs are constructed by joining
 this variable with the SHA2 checksum of the package file.
 
+If the mirror being used does not have the same checksum (*e.g.* with a
+pull-through cache like Artifactory), you can set the
+`PYTHON_BUILD_MIRROR_URL_SKIP_CHECKSUM` environment variable.
+
 If you don't have an SHA2 program installed, python-build will skip the download
 mirror and use official URLs instead. You can force python-build to bypass the
 mirror by setting the `PYTHON_BUILD_SKIP_MIRROR` environment variable.
@@ -213,10 +219,58 @@ variable when using `--keep` with `python-build`.
 
 ## Getting Help
 
-Please see the [pyenv wiki](https://github.com/yyuu/pyenv/wiki) for solutions to common problems.
+Please see the [pyenv wiki](https://github.com/pyenv/pyenv/wiki) for solutions to common problems.
 
-[wiki]: https://github.com/yyuu/pyenv/wiki
+[wiki]: https://github.com/pyenv/pyenv/wiki
 
 If you can't find an answer on the wiki, open an issue on the [issue
-tracker](https://github.com/yyuu/pyenv/issues). Be sure to include
+tracker](https://github.com/pyenv/pyenv/issues). Be sure to include
 the full build log for build failures.
+
+## Contributing
+
+### Testing new python versions
+
+If you are contributing a new python version for python-build, 
+you can test the build in a [docker](https://www.docker.com/) container based on Ubuntu 18.04.
+
+With docker installed:
+
+```sh
+docker build -t my_container .
+docker run my_container pyenv install <my_version>
+```
+
+To enter a shell which will allow you to build and then test a python version,
+replace the second line with
+
+```sh
+docker run -it my_container
+```
+
+The container will need to be rebuilt whenever you change the repo,
+but after the first build, this will be very fast, 
+as the layer including the build dependencies will be cached.
+
+Changes made inside the container will not be persisted.
+
+To test *all* new versions since a particular revision (e.g. `master`), `cd` to the root of your `pyenv` repo, and run this script:
+
+```sh
+set -e
+set -x
+
+docker build -t pyenv-test-container .
+
+git diff --name-only master \
+  | grep '^plugins/python-build/share/python-build/' \
+  | awk -F '/' '{print $NF}' \
+  | xargs -I _ docker run pyenv-test-container pyenv install _
+```
+
+- Build the docker image with the **t**ag pyenv-test-container
+- Look for the names files changed since revision `master`
+- Filter out any which don't live where python-build keeps its build scripts
+- Look only at the file name (i.e. the python version name)
+- Run a new docker container for each, building that version
+

plugins/python-build/bin/pyenv-install

@@ -22,7 +22,7 @@
 #
 # For detailed information on installing Python versions with
 # python-build, including a list of environment variables for adjusting
-# compilation, see: https://github.com/yyuu/pyenv#readme
+# compilation, see: https://github.com/pyenv/pyenv#readme
 #
 set -e
 [ -n "$PYENV_DEBUG" ] && set -x
@@ -59,7 +59,7 @@ usage() {
 
 definitions() {
   local query="$1"
-  python-build --definitions | $(type -p ggrep grep | head -1) -F "$query" || true
+  python-build --definitions | $(type -P ggrep grep | head -1) -F "$query" || true
 }
 
 indent() {
@@ -160,7 +160,7 @@ if [ -d "${PREFIX}/bin" ]; then
     read -p "continue with installation? (y/N) "
 
     case "$REPLY" in
-    y* | Y* ) ;;
+    y | Y | yes | YES ) ;;
     * ) exit 1 ;;
     esac
   elif [ -n "$SKIP_EXISTING" ]; then
@@ -191,7 +191,7 @@ if [ -z "${PYENV_BOOTSTRAP_VERSION}" ]; then
     # unsatisfied local .python-version file can cause the installer to
     # fail.)
     for version_info in "${VERSION_NAME%-dev}" "${VERSION_NAME%.*}" "${VERSION_NAME%%.*}"; do
-      # Anaconda's `curl` doesn't work on platfrom where `/etc/pki/tls/certs/ca-bundle.crt` isn't available (e.g. Debian)
+      # Anaconda's `curl` doesn't work on platform where `/etc/pki/tls/certs/ca-bundle.crt` isn't available (e.g. Debian)
       for version in $(pyenv-whence "python${version_info}" 2>/dev/null || true); do
         if [[ "${version}" != "anaconda"* ]] && [[ "${version}" != "miniconda"* ]]; then
           PYENV_BOOTSTRAP_VERSION="${version}"
@@ -200,7 +200,7 @@ if [ -z "${PYENV_BOOTSTRAP_VERSION}" ]; then
       done
     done
     ;;
-  "pypy-dev" | "pypy-"*"-src" | "pypy3-"*"-src" )
+  "pypy"*"-dev" | "pypy"*"-src" )
     # PyPy/PyPy3 requires existing Python 2.7 to build
     if [ -n "${PYENV_RPYTHON_VERSION}" ]; then
       PYENV_BOOTSTRAP_VERSION="${PYENV_RPYTHON_VERSION}"
@@ -213,10 +213,12 @@ if [ -z "${PYENV_BOOTSTRAP_VERSION}" ]; then
       done
     fi
     if [ -n "$PYENV_BOOTSTRAP_VERSION" ]; then
-      if ! PYENV_VERSION="$PYENV_BOOTSTRAP_VERSION" pyenv-exec python -c 'import curses' 1>/dev/null 2>&1; then
-        echo "pyenv-install: $VERSION_NAME: PyPy requires \`curses' in $PYENV_BOOTSTRAP_VERSION to build from source." >&2
-        exit 1
-      fi
+      for dep in curses genc pycparser; do
+        if ! PYENV_VERSION="$PYENV_BOOTSTRAP_VERSION" pyenv-exec python -c "import ${dep}" 1>/dev/null 2>&1; then
+          echo "pyenv-install: $VERSION_NAME: PyPy requires \`${dep}' in $PYENV_BOOTSTRAP_VERSION to build from source." >&2
+          exit 1
+        fi
+      done
     else
       echo "pyenv-install: $VERSION_NAME: PyPy requires Python 2.7 to build from source." >&2
       exit 1

plugins/python-build/bin/pyenv-uninstall

@@ -69,9 +69,9 @@ if [ -z "$FORCE" ]; then
     exit 1
   fi
 
-  read -p "pyenv: remove $PREFIX? "
+  read -p "pyenv: remove $PREFIX? [y|N] "
   case "$REPLY" in
-  y* | Y* ) ;;
+  y | Y | yes | YES ) ;;
   * ) exit 1 ;;
   esac
 fi
@@ -81,6 +81,7 @@ for hook in "${before_hooks[@]}"; do eval "$hook"; done
 if [ -d "$PREFIX" ]; then
   rm -rf "$PREFIX"
   pyenv-rehash
+  echo "pyenv: $VERSION_NAME uninstalled"
 fi
 
 for hook in "${after_hooks[@]}"; do eval "$hook"; done

plugins/python-build/scripts/README.md

@@ -0,0 +1,22 @@
+# Scripts for updating python-build
+
+Install dependencies with `pip install -r requirements.txt`.
+
+## add_miniconda.py
+
+```_add_miniconda
+usage: add_miniconda.py [-h] [-d] [-v]
+
+Script to add non-"latest" miniconda releases. Written for python 3.7. Checks
+the miniconda download archives for new versions, then writes a build script
+for any which do not exist locally, saving it to plugins/python-
+build/share/python-build. Ignores releases below 4.3.30. Also ignores sub-
+patch releases if that major.minor.patch already exists, but otherwise, takes
+the latest sub-patch release for given OS/arch. Assumes all miniconda3
+releases < 4.7 default to python 3.6, and anything else 3.7.
+
+optional arguments:
+  -h, --help     show this help message and exit
+  -d, --dry-run  Do not write scripts, just report them to stdout
+  -v, --verbose  Increase verbosity of logging
+```

plugins/python-build/scripts/add_miniconda.py

@@ -0,0 +1,332 @@
+#!/usr/bin/env python3
+"""Script to add non-"latest" miniconda releases.
+Written for python 3.7.
+
+Checks the miniconda download archives for new versions,
+then writes a build script for any which do not exist locally,
+saving it to plugins/python-build/share/python-build.
+
+Ignores releases below 4.3.30.
+Also ignores sub-patch releases if that major.minor.patch already exists,
+but otherwise, takes the latest sub-patch release for given OS/arch.
+Assumes all miniconda3 releases < 4.7 default to python 3.6, and anything else 3.7.
+"""
+import textwrap
+from argparse import ArgumentParser
+from collections import defaultdict
+from enum import Enum
+from functools import total_ordering
+from pathlib import Path
+from typing import NamedTuple, List, Optional, DefaultDict, Dict
+import logging
+
+import requests_html
+
+logger = logging.getLogger(__name__)
+
+CONDA_REPO = "https://repo.anaconda.com"
+MINICONDA_REPO = CONDA_REPO + "/miniconda"
+# ANACONDA_REPO = CONDA_REPO + "/archive"
+
+install_script_fmt = """
+case "$(anaconda_architecture 2>/dev/null || true)" in
+{install_lines}
+* )
+  {{ echo
+    colorize 1 "ERROR"
+    echo ": The binary distribution of Miniconda is not available for $(anaconda_architecture 2>/dev/null || true)."
+    echo
+  }} >&2
+  exit 1
+  ;;
+esac
+""".lstrip()
+
+install_line_fmt = """
+"{os}-{arch}" )
+  install_script "Miniconda{suffix}-{version_py_version}{version_str}-{os}-{arch}" "{repo}/Miniconda{suffix}-{version_py_version}{version_str}-{os}-{arch}.sh#{md5}" "miniconda" verify_{py_version}
+  ;;
+""".strip()
+
+here = Path(__file__).resolve()
+out_dir: Path = here.parent.parent / "share" / "python-build"
+
+
+class StrEnum(str, Enum):
+    """Enum subclass whose members are also instances of str
+    and directly comparable to strings. str type is forced at declaration.
+
+    Adapted from https://github.com/kissgyorgy/enum34-custom/blob/dbc89596761c970398701d26c6a5bbcfcf70f548/enum_custom.py#L100
+    (MIT license)
+    """
+
+    def __new__(cls, *args):
+        for arg in args:
+            if not isinstance(arg, str):
+                raise TypeError("Not text %s:" % arg)
+
+        return super(StrEnum, cls).__new__(cls, *args)
+
+    def __str__(self):
+        return str(self.value)
+
+
+class SupportedOS(StrEnum):
+    LINUX = "Linux"
+    MACOSX = "MacOSX"
+
+
+class SupportedArch(StrEnum):
+    PPC64LE = "ppc64le"
+    X86_64 = "x86_64"
+    X86 = "x86"
+
+
+class Suffix(StrEnum):
+    TWO = "2"
+    THREE = "3"
+
+
+class PyVersion(StrEnum):
+    PY27 = "py27"
+    PY36 = "py36"
+    PY37 = "py37"
+    PY38 = "py38"
+    PY39 = "py39"
+
+    def version(self):
+        first, *others = self.value[2:]
+        return f"{first}.{''.join(others)}"
+
+    def version_info(self):
+        return tuple(int(n) for n in self.version().split("."))
+
+
+@total_ordering
+class VersionStr(str):
+    def info(self):
+        return tuple(int(n) for n in self.split("."))
+
+    def __eq__(self, other):
+        return str(self) == str(other)
+
+    def __lt__(self, other):
+        if isinstance(other, VersionStr):
+            return self.info() < other.info()
+        raise ValueError("VersionStr can only be compared to other VersionStr")
+
+    @classmethod
+    def from_info(cls, version_info):
+        return VersionStr(".".join(str(n) for n in version_info))
+
+    def __hash__(self):
+        return hash(str(self))
+
+
+class MinicondaVersion(NamedTuple):
+    suffix: Suffix
+    version_str: VersionStr
+    py_version: Optional[PyVersion]
+
+    @classmethod
+    def from_str(cls, s):
+        """
+        Convert a string of the form "miniconda_n-ver" or "miniconda_n-py_ver-ver" to a :class:`MinicondaVersion` object.
+        """
+        components = s.split("-")
+        if len(components) == 3:
+            miniconda_n, py_ver, ver = components
+            py_ver = PyVersion(f"py{py_ver.replace('.', '')}")
+        else:
+            miniconda_n, ver = components
+            py_ver = None
+        return MinicondaVersion(Suffix(miniconda_n[-1]), VersionStr(ver), py_ver)
+
+    def to_filename(self):
+        if self.py_version:
+            return f"miniconda{self.suffix}-{self.py_version.version()}-{self.version_str}"
+        else:
+            return f"miniconda{self.suffix}-{self.version_str}"
+
+    def default_py_version(self):
+        """
+        :class:`PyVersion` of Python used with this Miniconda version
+        """
+        if self.py_version:
+            return self.py_version
+        elif self.suffix == Suffix.TWO:
+            return PyVersion.PY27
+        elif self.version_str.info() < (4, 7):
+            # https://docs.conda.io/projects/conda/en/latest/user-guide/tasks/manage-python.html
+            return PyVersion.PY36
+        else:
+            return PyVersion.PY37
+
+    def with_version_triple(self):
+        return MinicondaVersion(
+            self.suffix, VersionStr.from_info(self.version_str.info()[:3]), self.py_version
+        )
+
+
+class MinicondaSpec(NamedTuple):
+    version: MinicondaVersion
+    os: SupportedOS
+    arch: SupportedArch
+    md5: str
+    py_version: Optional[PyVersion] = None
+
+    @classmethod
+    def from_filestem(cls, stem, md5, py_version=None):
+        miniconda_n, ver, os, arch = stem.split("-")
+        if ver.startswith("py"):
+            py_ver, ver = ver.split("_", maxsplit=1)
+            py_ver = PyVersion(py_ver)
+        else:
+            py_ver = None
+        spec = MinicondaSpec(
+            MinicondaVersion(Suffix(miniconda_n[-1]), VersionStr(ver), py_ver),
+            SupportedOS(os),
+            SupportedArch(arch),
+            md5,
+        )
+        if py_version is None:
+            spec = spec.with_py_version(spec.version.default_py_version())
+        return spec
+
+    def to_install_lines(self):
+        """
+        Installation command for this version of Miniconda for use in a Pyenv installation script
+        """
+        return install_line_fmt.format(
+            repo=MINICONDA_REPO,
+            suffix=self.version.suffix,
+            version_str=self.version.version_str,
+            version_py_version=f"{self.version.py_version}_" if self.version.py_version else "",
+            os=self.os,
+            arch=self.arch,
+            md5=self.md5,
+            py_version=self.py_version,
+        )
+
+    def with_py_version(self, py_version: PyVersion):
+        return MinicondaSpec(*self[:-1], py_version=py_version)
+
+    def with_version_triple(self):
+        version, *others = self
+        return MinicondaSpec(version.with_version_triple(), *others)
+
+
+def make_script(specs: List[MinicondaSpec]):
+    install_lines = [s.to_install_lines() for s in specs]
+    return install_script_fmt.format(install_lines="\n".join(install_lines))
+
+
+def get_existing_minicondas():
+    """
+    Enumerate existing Miniconda installation scripts in share/python-build/ except rolling releases.
+
+    :returns: A generator of :class:`MinicondaVersion` objects.
+    """
+    logger.info("Getting known miniconda versions")
+    for p in out_dir.iterdir():
+        name = p.name
+        if not p.is_file() or not name.startswith("miniconda"):
+            continue
+        try:
+            v = MinicondaVersion.from_str(name)
+            if v.version_str != "latest":
+                logger.debug("Found existing miniconda version %s", v)
+                yield v
+        except ValueError:
+            pass
+
+
+def get_available_minicondas():
+    """
+    Fetch remote miniconda versions.
+
+    :returns: A generator of :class:`MinicondaSpec` objects for each release available for download
+    except rolling releases.
+    """
+    logger.info("Fetching remote miniconda versions")
+    session = requests_html.HTMLSession()
+    response = session.get(MINICONDA_REPO)
+    page: requests_html.HTML = response.html
+    table = page.find("table", first=True)
+    rows = table.find("tr")[1:]
+    for row in rows:
+        f, size, date, md5 = row.find("td")
+        fname = f.text
+        md5 = md5.text
+
+        if not fname.endswith(".sh"):
+            continue
+        stem = fname[:-3]
+
+        try:
+            s = MinicondaSpec.from_filestem(stem, md5)
+            if s.version.version_str != "latest":
+                logger.debug("Found remote miniconda version %s", s)
+                yield s
+        except ValueError:
+            pass
+
+
+def key_fn(spec: MinicondaSpec):
+    return (
+        spec.version.version_str.info(),
+        spec.version.suffix.value,
+        spec.os.value,
+        spec.arch.value,
+    )
+
+
+if __name__ == "__main__":
+    parser = ArgumentParser(description=__doc__)
+    parser.add_argument(
+        "-d", "--dry-run", action="store_true",
+        help="Do not write scripts, just report them to stdout",
+    )
+    parser.add_argument(
+        "-v", "--verbose", action="count", default=0,
+        help="Increase verbosity of logging",
+    )
+    parsed = parser.parse_args()
+
+    log_level = {
+        0: logging.WARNING,
+        1: logging.INFO,
+        2: logging.DEBUG,
+    }.get(parsed.verbose, logging.DEBUG)
+    logging.basicConfig(level=log_level)
+    if parsed.verbose < 3:
+        logging.getLogger("requests").setLevel(logging.WARNING)
+
+    existing_versions = set(get_existing_minicondas())
+    available_specs = set(get_available_minicondas())
+
+    # version triple to triple-ified spec to raw spec
+    to_add: DefaultDict[
+        MinicondaVersion, Dict[MinicondaSpec, MinicondaSpec]
+    ] = defaultdict(dict)
+
+    logger.info("Checking for new versions")
+    for s in sorted(available_specs, key=key_fn):
+        key = s.version.with_version_triple()
+        if key in existing_versions or key.version_str.info() <= (4, 3, 30):
+            logger.debug("Ignoring version %s (too old or already exists)", s)
+            continue
+
+        to_add[key][s.with_version_triple()] = s
+
+    logger.info("Writing %s scripts", len(to_add))
+    for ver, d in to_add.items():
+        specs = list(d.values())
+        fpath = out_dir / ver.to_filename()
+        script_str = make_script(specs)
+        logger.debug("Writing script for %s", ver)
+        if parsed.dry_run:
+            print(f"Would write spec to {fpath}:\n" + textwrap.indent(script_str, "  "))
+        else:
+            with open(fpath, "w") as f:
+                f.write(script_str)

plugins/python-build/scripts/requirements.txt

@@ -0,0 +1 @@
+requests-html

plugins/python-build/share/python-build/2.1.3

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.2" "https://ftpmirror.gnu.org/readline/readline-6.2.tar.gz#79a696070a058c233c72dd6ac697021cc64abd5ed51e59db867d66d196a89381" standard --if has_broken_mac_readline
-install_package "Python-2.1.3" "https://www.python.org/ftp/python/2.1.3/Python-2.1.3.tgz#1bcb5bb587948bc38f36db60e15c376009c56c66570e563a08a82bf7f227afb9" ldflags_dirs standard verify_py21
+install_package "readline-6.2" "https://ftpmirror.gnu.org/readline/readline-6.2.tar.gz#79a696070a058c233c72dd6ac697021cc64abd5ed51e59db867d66d196a89381" mac_readline --if has_broken_mac_readline
+install_package "Python-2.1.3" "https://www.python.org/ftp/python/2.1.3/Python-2.1.3.tgz#1bcb5bb587948bc38f36db60e15c376009c56c66570e563a08a82bf7f227afb9" standard verify_py21
 #install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 #install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.2.3

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.2" "https://ftpmirror.gnu.org/readline/readline-6.2.tar.gz#79a696070a058c233c72dd6ac697021cc64abd5ed51e59db867d66d196a89381" standard --if has_broken_mac_readline
-install_package "Python-2.2.3" "https://www.python.org/ftp/python/2.2.3/Python-2.2.3.tgz#a8f92e6b89d47359fff0d1fbfe47f104afc77fd1cd5143e7332758b7bc100188" ldflags_dirs standard verify_py22
+install_package "readline-6.2" "https://ftpmirror.gnu.org/readline/readline-6.2.tar.gz#79a696070a058c233c72dd6ac697021cc64abd5ed51e59db867d66d196a89381" mac_readline --if has_broken_mac_readline
+install_package "Python-2.2.3" "https://www.python.org/ftp/python/2.2.3/Python-2.2.3.tgz#a8f92e6b89d47359fff0d1fbfe47f104afc77fd1cd5143e7332758b7bc100188" standard verify_py22
 #install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 #install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.3.7

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.2" "https://ftpmirror.gnu.org/readline/readline-6.2.tar.gz#79a696070a058c233c72dd6ac697021cc64abd5ed51e59db867d66d196a89381" standard --if has_broken_mac_readline
-install_package "Python-2.3.7" "https://www.python.org/ftp/python/2.3.7/Python-2.3.7.tgz#969a9891dce9f50b13e54f9890acaf2be66715a5895bf9b11111f320c205b90e" ldflags_dirs standard verify_py23
+install_package "readline-6.2" "https://ftpmirror.gnu.org/readline/readline-6.2.tar.gz#79a696070a058c233c72dd6ac697021cc64abd5ed51e59db867d66d196a89381" mac_readline --if has_broken_mac_readline
+install_package "Python-2.3.7" "https://www.python.org/ftp/python/2.3.7/Python-2.3.7.tgz#969a9891dce9f50b13e54f9890acaf2be66715a5895bf9b11111f320c205b90e" standard verify_py23
 #install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 #install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.0

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4" "https://www.python.org/ftp/python/2.4/Python-2.4.tgz#ff746de0fae8691c082414b42a2bb172da8797e6e8ff66c9a39d2e452f7034e9" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4" "https://www.python.org/ftp/python/2.4/Python-2.4.tgz#ff746de0fae8691c082414b42a2bb172da8797e6e8ff66c9a39d2e452f7034e9" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.1

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4.1" "https://www.python.org/ftp/python/2.4.1/Python-2.4.1.tgz#f449c3b167389324c525ad99d02376c518ac11e163dbbbc13bc88a5c7101fd00" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4.1" "https://www.python.org/ftp/python/2.4.1/Python-2.4.1.tgz#f449c3b167389324c525ad99d02376c518ac11e163dbbbc13bc88a5c7101fd00" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.2

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4.2" "https://www.python.org/ftp/python/2.4.2/Python-2.4.2.tgz#2653e1846e87fd9b3ee287fefc965c80c54646548b4913a22265b0dd54493adf" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4.2" "https://www.python.org/ftp/python/2.4.2/Python-2.4.2.tgz#2653e1846e87fd9b3ee287fefc965c80c54646548b4913a22265b0dd54493adf" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.3

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4.3" "https://www.python.org/ftp/python/2.4.3/Python-2.4.3.tgz#985a413932f5e31e6280b37da6b285a3a0b2748c6786643989ed9b23de97e2d5" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4.3" "https://www.python.org/ftp/python/2.4.3/Python-2.4.3.tgz#985a413932f5e31e6280b37da6b285a3a0b2748c6786643989ed9b23de97e2d5" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.4

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4.4" "https://www.python.org/ftp/python/2.4.4/Python-2.4.4.tgz#92be6e20cbc3111d9dd0c016d72ef7914c23b879dc52df7ba28df97afbf12e2e" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4.4" "https://www.python.org/ftp/python/2.4.4/Python-2.4.4.tgz#92be6e20cbc3111d9dd0c016d72ef7914c23b879dc52df7ba28df97afbf12e2e" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.5

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4.5" "https://www.python.org/ftp/python/2.4.5/Python-2.4.5.tgz#6ae6f67a388a7f70ed3a20eebab5aae995ee433089d1f1724095c62f4b7389a1" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4.5" "https://www.python.org/ftp/python/2.4.5/Python-2.4.5.tgz#6ae6f67a388a7f70ed3a20eebab5aae995ee433089d1f1724095c62f4b7389a1" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.4.6

@@ -1,5 +1,5 @@
 require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.4.6" "https://www.python.org/ftp/python/2.4.6/Python-2.4.6.tgz#b03f269e826927f05c966cf4f4414f3c93ee2314960859e7f8375e24e82f8b02" ldflags_dirs standard verify_py24
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.4.6" "https://www.python.org/ftp/python/2.4.6/Python-2.4.6.tgz#b03f269e826927f05c966cf4f4414f3c93ee2314960859e7f8375e24e82f8b02" standard verify_py24
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.1" "https://pypi.python.org/packages/source/p/pip/pip-1.1.tar.gz#993804bb947d18508acee02141281c77d27677f8c14eaa64d6287a1c53ef01c8" python

plugins/python-build/share/python-build/2.5.0

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5" "https://www.python.org/ftp/python/2.5/Python-2.5.tgz#d7bbf42e36003c6065cd19f3e67d283521858515ee923220f654131cebe1d8f2" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5" "https://www.python.org/ftp/python/2.5/Python-2.5.tgz#d7bbf42e36003c6065cd19f3e67d283521858515ee923220f654131cebe1d8f2" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.5.1

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5.1" "https://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz#1f5caee846049ca30d996f9403eefdb996295c4af664867e35dcc5eb36e4e7e8" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5.1" "https://www.python.org/ftp/python/2.5.1/Python-2.5.1.tgz#1f5caee846049ca30d996f9403eefdb996295c4af664867e35dcc5eb36e4e7e8" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.5.2

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5.2" "https://www.python.org/ftp/python/2.5.2/Python-2.5.2.tgz#834afe8a88adaf623b05ac5dd6700dd5bb5d0d5553fc74ad529359a3496e4ae3" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5.2" "https://www.python.org/ftp/python/2.5.2/Python-2.5.2.tgz#834afe8a88adaf623b05ac5dd6700dd5bb5d0d5553fc74ad529359a3496e4ae3" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.5.3

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5.3" "https://www.python.org/ftp/python/2.5.3/Python-2.5.3.tgz#c3fee607d20a77dfb72ea2e627eb4d95d25c735603435abde62c57015a0445bd" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5.3" "https://www.python.org/ftp/python/2.5.3/Python-2.5.3.tgz#c3fee607d20a77dfb72ea2e627eb4d95d25c735603435abde62c57015a0445bd" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.5.4

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5.4" "https://www.python.org/ftp/python/2.5.4/Python-2.5.4.tgz#3d3b205611ee503a38a9433d5645a571668420bb219242c7f51af85f05664da6" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5.4" "https://www.python.org/ftp/python/2.5.4/Python-2.5.4.tgz#3d3b205611ee503a38a9433d5645a571668420bb219242c7f51af85f05664da6" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.5.5

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5.5" "https://www.python.org/ftp/python/2.5.5/Python-2.5.5.tgz#03be1019c4fe93daeb53ba9e4294bf22a8ed4cb854cbd57e24e16f6bf63e2392" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5.5" "https://www.python.org/ftp/python/2.5.5/Python-2.5.5.tgz#03be1019c4fe93daeb53ba9e4294bf22a8ed4cb854cbd57e24e16f6bf63e2392" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.5.6

@@ -1,5 +1,5 @@
 #require_gcc
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.5.6" "https://www.python.org/ftp/python/2.5.6/Python-2.5.6.tgz#c2e4377597241b1065677d23327c04d0f41945d370c61a491cc88be367234c5d" ldflags_dirs standard verify_py25
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.5.6" "https://www.python.org/ftp/python/2.5.6/Python-2.5.6.tgz#c2e4377597241b1065677d23327c04d0f41945d370c61a491cc88be367234c5d" standard verify_py25
 install_package "setuptools-1.4.2" "https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz#263986a60a83aba790a5bffc7d009ac88114ba4e908e5c90e453b3bf2155dbbd" python
 install_package "pip-1.3.1" "https://pypi.python.org/packages/source/p/pip/pip-1.3.1.tar.gz#145eaa5d1ea1b062663da1f3a97780d7edea4c63c68a37c463b1deedf7bb4957" python

plugins/python-build/share/python-build/2.6.0

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6" "https://www.python.org/ftp/python/2.6/Python-2.6.tgz#7c2f21a968a737a59ed0729f4b1dc154dc3aa183c20be96055186fe43c6742d0" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.1

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.1" "https://www.python.org/ftp/python/2.6.1/Python-2.6.1.tgz#fb65e93678e1327e3e8559cc56e1e00ed8c07162b21287a3502677892c5c515c" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.2

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.2" "https://www.python.org/ftp/python/2.6.2/Python-2.6.2.tgz#e37ecdf249f248f4fea227adbca09c778670b64fcb5e45947ec3e093cbc12c86" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.3

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.3" "https://www.python.org/ftp/python/2.6.3/Python-2.6.3.tgz#a71b55540690425fd82ab00819aeb92c1b23cbb4730a0ccd2e25c833b22a812e" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.4

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.4" "https://www.python.org/ftp/python/2.6.4/Python-2.6.4.tgz#1a25a47506e4165704cfe2b07c0a064b0b5762a2d18b8fbdad5af688aeacd252" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.5

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.5" "https://www.python.org/ftp/python/2.6.5/Python-2.6.5.tgz#b331dafdce3361834fee783795d4f68ae7cf7d379e9137c2d8e8531cea615ede" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.6

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.6.6" "https://www.python.org/ftp/python/2.6.6/Python-2.6.6.tgz#372f66db46d773214e4619df1794a26449158f626138d4d2141a64c2f017fae1" ldflags_dirs standard verify_py26 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.6" "https://www.python.org/ftp/python/2.6.6/Python-2.6.6.tgz#372f66db46d773214e4619df1794a26449158f626138d4d2141a64c2f017fae1" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.7

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.6.7" "https://www.python.org/ftp/python/2.6.7/Python-2.6.7.tgz#a8093eace4cfd3e06b05f0deb5d765e3c6cec65908048640a8cadd7a948b3826" ldflags_dirs standard verify_py26 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.7" "https://www.python.org/ftp/python/2.6.7/Python-2.6.7.tgz#a8093eace4cfd3e06b05f0deb5d765e3c6cec65908048640a8cadd7a948b3826" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.8

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.6.8" "https://www.python.org/ftp/python/2.6.8/Python-2.6.8.tgz#5bf02a75ffa2fcaa5a3cabb8201998519b045541975622316888ea468d9512f7" ldflags_dirs standard verify_py26 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.8" "https://www.python.org/ftp/python/2.6.8/Python-2.6.8.tgz#5bf02a75ffa2fcaa5a3cabb8201998519b045541975622316888ea468d9512f7" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.6.9

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.6.9" "https://www.python.org/ftp/python/2.6.9/Python-2.6.9.tgz#7277b1285d8a82f374ef6ebaac85b003266f7939b3f2a24a3af52f9523ac94db" ldflags_dirs standard verify_py26 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.6.9" "https://www.python.org/ftp/python/2.6.9/Python-2.6.9.tgz#7277b1285d8a82f374ef6ebaac85b003266f7939b3f2a24a3af52f9523ac94db" standard verify_py26 ensurepip

plugins/python-build/share/python-build/2.7

@@ -1,4 +0,0 @@
-#require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7" "https://www.python.org/ftp/python/2.7/Python-2.7.tgz#5670dd6c0c93b0b529781d070852f7b51ce6855615b16afcd318341af2910fb5" ldflags_dirs standard verify_py27 ensurepip

plugins/python-build/share/python-build/2.7-dev

@@ -1,4 +1,5 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_hg "Python-2.7-dev" "https://hg.python.org/cpython" "2.7" standard verify_py27 ensurepip
+prefer_openssl11
+install_package "openssl-1.1.0j" "https://www.openssl.org/source/old/1.1.0/openssl-1.1.0j.tar.gz#31bec6c203ce1a8e93d5994f4ed304c63ccf07676118b6634edded12ad1b3246" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_git "Python-2.7-dev" "https://github.com/python/cpython" "2.7" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.0

@@ -0,0 +1,4 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7" "https://www.python.org/ftp/python/2.7/Python-2.7.tgz#5670dd6c0c93b0b529781d070852f7b51ce6855615b16afcd318341af2910fb5" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.1

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7.1" "https://www.python.org/ftp/python/2.7.1/Python-2.7.1.tgz#ca13e7b1860821494f70de017202283ad73b1fb7bd88586401c54ef958226ec8" ldflags_dirs standard verify_py27 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7.1" "https://www.python.org/ftp/python/2.7.1/Python-2.7.1.tgz#ca13e7b1860821494f70de017202283ad73b1fb7bd88586401c54ef958226ec8" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.10

@@ -1,8 +1,8 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
 if has_tar_xz_support; then
-  install_package "Python-2.7.10" "https://www.python.org/ftp/python/2.7.10/Python-2.7.10.tar.xz#1cd3730781b91caf0fa1c4d472dc29274186480161a150294c42ce9b5c5effc0" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.10" "https://www.python.org/ftp/python/2.7.10/Python-2.7.10.tar.xz#1cd3730781b91caf0fa1c4d472dc29274186480161a150294c42ce9b5c5effc0" standard verify_py27 copy_python_gdb ensurepip
 else
-  install_package "Python-2.7.10" "https://www.python.org/ftp/python/2.7.10/Python-2.7.10.tgz#eda8ce6eec03e74991abb5384170e7c65fcd7522e409b8e83d7e6372add0f12a" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.10" "https://www.python.org/ftp/python/2.7.10/Python-2.7.10.tgz#eda8ce6eec03e74991abb5384170e7c65fcd7522e409b8e83d7e6372add0f12a" standard verify_py27 copy_python_gdb ensurepip
 fi

plugins/python-build/share/python-build/2.7.11

@@ -1,8 +1,8 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
 if has_tar_xz_support; then
-  install_package "Python-2.7.11" "https://www.python.org/ftp/python/2.7.11/Python-2.7.11.tar.xz#962b4c45af50124ea61f11a30deb4342fc0bc21126790fa1d7f6c79809413f46" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.11" "https://www.python.org/ftp/python/2.7.11/Python-2.7.11.tar.xz#962b4c45af50124ea61f11a30deb4342fc0bc21126790fa1d7f6c79809413f46" standard verify_py27 copy_python_gdb ensurepip
 else
-  install_package "Python-2.7.11" "https://www.python.org/ftp/python/2.7.11/Python-2.7.11.tgz#82929b96fd6afc8da838b149107078c02fa1744b7e60999a8babbc0d3fa86fc6" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.11" "https://www.python.org/ftp/python/2.7.11/Python-2.7.11.tgz#82929b96fd6afc8da838b149107078c02fa1744b7e60999a8babbc0d3fa86fc6" standard verify_py27 copy_python_gdb ensurepip
 fi

plugins/python-build/share/python-build/2.7.12

@@ -1,8 +1,8 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
 if has_tar_xz_support; then
-  install_package "Python-2.7.12" "https://www.python.org/ftp/python/2.7.12/Python-2.7.12.tar.xz#d7837121dd5652a05fef807c361909d255d173280c4e1a4ded94d73d80a1f978" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.12" "https://www.python.org/ftp/python/2.7.12/Python-2.7.12.tar.xz#d7837121dd5652a05fef807c361909d255d173280c4e1a4ded94d73d80a1f978" standard verify_py27 copy_python_gdb ensurepip
 else
-  install_package "Python-2.7.12" "https://www.python.org/ftp/python/2.7.12/Python-2.7.12.tgz#3cb522d17463dfa69a155ab18cffa399b358c966c0363d6c8b5b3bf1384da4b6" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.12" "https://www.python.org/ftp/python/2.7.12/Python-2.7.12.tgz#3cb522d17463dfa69a155ab18cffa399b358c966c0363d6c8b5b3bf1384da4b6" standard verify_py27 copy_python_gdb ensurepip
 fi

plugins/python-build/share/python-build/2.7.13

@@ -0,0 +1,8 @@
+#require_gcc
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+if has_tar_xz_support; then
+  install_package "Python-2.7.13" "https://www.python.org/ftp/python/2.7.13/Python-2.7.13.tar.xz#35d543986882f78261f97787fd3e06274bfa6df29fac9b4a94f73930ff98f731" standard verify_py27 copy_python_gdb ensurepip
+else
+  install_package "Python-2.7.13" "https://www.python.org/ftp/python/2.7.13/Python-2.7.13.tgz#a4f05a0720ce0fd92626f0278b6b433eee9a6173ddf2bced7957dfb599a5ece1" standard verify_py27 copy_python_gdb ensurepip
+fi

plugins/python-build/share/python-build/2.7.14

@@ -0,0 +1,9 @@
+#require_gcc
+prefer_openssl11
+install_package "openssl-1.1.0j" "https://www.openssl.org/source/old/1.1.0/openssl-1.1.0j.tar.gz#31bec6c203ce1a8e93d5994f4ed304c63ccf07676118b6634edded12ad1b3246" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+if has_tar_xz_support; then
+  install_package "Python-2.7.14" "https://www.python.org/ftp/python/2.7.14/Python-2.7.14.tar.xz#71ffb26e09e78650e424929b2b457b9c912ac216576e6bd9e7d204ed03296a66" standard verify_py27 copy_python_gdb ensurepip
+else
+  install_package "Python-2.7.14" "https://www.python.org/ftp/python/2.7.14/Python-2.7.14.tgz#304c9b202ea6fbd0a4a8e0ad3733715fbd4749f2204a9173a58ec53c32ea73e8" standard verify_py27 copy_python_gdb ensurepip
+fi

plugins/python-build/share/python-build/2.7.15

@@ -0,0 +1,9 @@
+#require_gcc
+prefer_openssl11
+install_package "openssl-1.1.0j" "https://www.openssl.org/source/old/1.1.0/openssl-1.1.0j.tar.gz#31bec6c203ce1a8e93d5994f4ed304c63ccf07676118b6634edded12ad1b3246" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+if has_tar_xz_support; then
+  install_package "Python-2.7.15" "https://www.python.org/ftp/python/2.7.15/Python-2.7.15.tar.xz#22d9b1ac5b26135ad2b8c2901a9413537e08749a753356ee913c84dbd2df5574" standard verify_py27 copy_python_gdb ensurepip
+else
+  install_package "Python-2.7.15" "https://www.python.org/ftp/python/2.7.15/Python-2.7.15.tgz#18617d1f15a380a919d517630a9cd85ce17ea602f9bbdc58ddc672df4b0239db" standard verify_py27 copy_python_gdb ensurepip
+fi

plugins/python-build/share/python-build/2.7.16

@@ -0,0 +1,8 @@
+#require_gcc
+install_package "openssl-1.0.2q" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2q.tar.gz#5744cfcbcec2b1b48629f7354203bc1e5e9b5466998bbccc5b5fcde3b18eb684" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+if has_tar_xz_support; then
+  install_package "Python-2.7.16" "https://www.python.org/ftp/python/2.7.16/Python-2.7.16.tar.xz#f222ef602647eecb6853681156d32de4450a2c39f4de93bd5b20235f2e660ed7" standard verify_py27 copy_python_gdb ensurepip
+else
+  install_package "Python-2.7.16" "https://www.python.org/ftp/python/2.7.16/Python-2.7.16.tgz#01da813a3600876f03f46db11cc5c408175e99f03af2ba942ef324389a83bad5" standard verify_py27 copy_python_gdb ensurepip
+fi

plugins/python-build/share/python-build/2.7.17

@@ -0,0 +1,8 @@
+#require_gcc
+install_package "openssl-1.0.2q" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2q.tar.gz#5744cfcbcec2b1b48629f7354203bc1e5e9b5466998bbccc5b5fcde3b18eb684" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+if has_tar_xz_support; then
+  install_package "Python-2.7.17" "https://www.python.org/ftp/python/2.7.17/Python-2.7.17.tar.xz#4d43f033cdbd0aa7b7023c81b0e986fd11e653b5248dac9144d508f11812ba41" standard verify_py27 copy_python_gdb ensurepip
+else
+  install_package "Python-2.7.17" "https://www.python.org/ftp/python/2.7.17/Python-2.7.17.tgz#f22059d09cdf9625e0a7284d24a13062044f5bf59d93a7f3382190dfa94cecde" standard verify_py27 copy_python_gdb ensurepip
+fi

plugins/python-build/share/python-build/2.7.18

@@ -0,0 +1,8 @@
+export PYTHON_BUILD_HOMEBREW_OPENSSL_FORMULA="openssl@1.1 openssl@1.0 openssl"
+install_package "openssl-1.0.2q" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2q.tar.gz#5744cfcbcec2b1b48629f7354203bc1e5e9b5466998bbccc5b5fcde3b18eb684" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+if has_tar_xz_support; then
+  install_package "Python-2.7.18" "https://www.python.org/ftp/python/2.7.18/Python-2.7.18.tar.xz#b62c0e7937551d0cc02b8fd5cb0f544f9405bafc9a54d3808ed4594812edef43" standard verify_py27 copy_python_gdb ensurepip
+else
+  install_package "Python-2.7.18" "https://www.python.org/ftp/python/2.7.18/Python-2.7.18.tgz#da3080e3b488f648a3d7a4560ddee895284c3380b11d6de75edb986526b9a814" standard verify_py27 copy_python_gdb ensurepip
+fi

plugins/python-build/share/python-build/2.7.2

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7.2" "https://www.python.org/ftp/python/2.7.2/Python-2.7.2.tgz#1d54b7096c17902c3f40ffce7e5b84e0072d0144024184fff184a84d563abbb3" ldflags_dirs standard verify_py27 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7.2" "https://www.python.org/ftp/python/2.7.2/Python-2.7.2.tgz#1d54b7096c17902c3f40ffce7e5b84e0072d0144024184fff184a84d563abbb3" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.3

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7.3" "https://www.python.org/ftp/python/2.7.3/Python-2.7.3.tgz#d4c20f2b5faf95999fd5fecb3f7d32071b0820516224a6d2b72932ab47a1cb8e" ldflags_dirs standard verify_py27 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7.3" "https://www.python.org/ftp/python/2.7.3/Python-2.7.3.tgz#d4c20f2b5faf95999fd5fecb3f7d32071b0820516224a6d2b72932ab47a1cb8e" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.4

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7.4" "https://www.python.org/ftp/python/2.7.4/Python-2.7.4.tgz#98c5eb9c8e65effcc0122112ba17a0bce880aa23ecb560af56b55eb55632b81a" ldflags_dirs standard verify_py27 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7.4" "https://www.python.org/ftp/python/2.7.4/Python-2.7.4.tgz#98c5eb9c8e65effcc0122112ba17a0bce880aa23ecb560af56b55eb55632b81a" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.5

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7.5" "https://www.python.org/ftp/python/2.7.5/Python-2.7.5.tgz#8e1b5fa87b91835afb376a9c0d319d41feca07ffebc0288d97ab08d64f48afbf" ldflags_dirs standard verify_py27 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7.5" "https://www.python.org/ftp/python/2.7.5/Python-2.7.5.tgz#8e1b5fa87b91835afb376a9c0d319d41feca07ffebc0288d97ab08d64f48afbf" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.6

@@ -1,4 +1,4 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-2.7.6" "https://www.python.org/ftp/python/2.7.6/Python-2.7.6.tgz#99c6860b70977befa1590029fae092ddb18db1d69ae67e8b9385b66ed104ba58" ldflags_dirs standard verify_py27 ensurepip
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-2.7.6" "https://www.python.org/ftp/python/2.7.6/Python-2.7.6.tgz#99c6860b70977befa1590029fae092ddb18db1d69ae67e8b9385b66ed104ba58" standard verify_py27 copy_python_gdb ensurepip

plugins/python-build/share/python-build/2.7.7

@@ -1,8 +1,8 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
 if has_tar_xz_support; then
-  install_package "Python-2.7.7" "https://www.python.org/ftp/python/2.7.7/Python-2.7.7.tar.xz#2983e3cd089b30c50e2b2234f07c2ac4fb8a5df230ab8f2e1133a1d8b208da78" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.7" "https://www.python.org/ftp/python/2.7.7/Python-2.7.7.tar.xz#2983e3cd089b30c50e2b2234f07c2ac4fb8a5df230ab8f2e1133a1d8b208da78" standard verify_py27 copy_python_gdb ensurepip
 else
-  install_package "Python-2.7.7" "https://www.python.org/ftp/python/2.7.7/Python-2.7.7.tgz#7f49c0a6705ad89d925181e27d0aaa025ee4731ce0de64776c722216c3e66c42" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.7" "https://www.python.org/ftp/python/2.7.7/Python-2.7.7.tgz#7f49c0a6705ad89d925181e27d0aaa025ee4731ce0de64776c722216c3e66c42" standard verify_py27 copy_python_gdb ensurepip
 fi

plugins/python-build/share/python-build/2.7.8

@@ -1,8 +1,8 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
 if has_tar_xz_support; then
-  install_package "Python-2.7.8" "https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tar.xz#edde10a0cb7d14e2735e682882d5b287028d1485c456758154c19573db68075a" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.8" "https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tar.xz#edde10a0cb7d14e2735e682882d5b287028d1485c456758154c19573db68075a" standard verify_py27 copy_python_gdb ensurepip
 else
-  install_package "Python-2.7.8" "https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tgz#74d70b914da4487aa1d97222b29e9554d042f825f26cb2b93abd20fdda56b557" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.8" "https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tgz#74d70b914da4487aa1d97222b29e9554d042f825f26cb2b93abd20fdda56b557" standard verify_py27 copy_python_gdb ensurepip
 fi

plugins/python-build/share/python-build/2.7.9

@@ -1,8 +1,8 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
 if has_tar_xz_support; then
-  install_package "Python-2.7.9" "https://www.python.org/ftp/python/2.7.9/Python-2.7.9.tar.xz#90d27e14ea7e03570026850e2e50ba71ad20b7eb31035aada1cf3def8f8d4916" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.9" "https://www.python.org/ftp/python/2.7.9/Python-2.7.9.tar.xz#90d27e14ea7e03570026850e2e50ba71ad20b7eb31035aada1cf3def8f8d4916" standard verify_py27 copy_python_gdb ensurepip
 else
-  install_package "Python-2.7.9" "https://www.python.org/ftp/python/2.7.9/Python-2.7.9.tgz#c8bba33e66ac3201dabdc556f0ea7cfe6ac11946ec32d357c4c6f9b018c12c5b" ldflags_dirs standard verify_py27 ensurepip
+  install_package "Python-2.7.9" "https://www.python.org/ftp/python/2.7.9/Python-2.7.9.tgz#c8bba33e66ac3201dabdc556f0ea7cfe6ac11946ec32d357c4c6f9b018c12c5b" standard verify_py27 copy_python_gdb ensurepip
 fi

plugins/python-build/share/python-build/3.0.1

@@ -1,9 +1,9 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.0.1" "https://www.python.org/ftp/python/3.0.1/Python-3.0.1.tgz#7d5f2feae9035f1d3d9e6bb7f092dbf374d6bb4b25abd0d2d11f13bba1cb04de" ldflags_dirs standard verify_py30
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.0.1" "https://www.python.org/ftp/python/3.0.1/Python-3.0.1.tgz#7d5f2feae9035f1d3d9e6bb7f092dbf374d6bb4b25abd0d2d11f13bba1cb04de" standard verify_py30
 if [[ "Darwin" == "$(uname -s)" ]]; then
-  # https://github.com/yyuu/pyenv/issues/456
+  # https://github.com/pyenv/pyenv/issues/456
   { echo
     colorize 1 "WARNING"
     echo ": pyenv cannot install setuptools-1.4.2 to CPython 3.0.1 on OS X."

plugins/python-build/share/python-build/3.1.0

@@ -1,6 +1,6 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.1" "https://www.python.org/ftp/python/3.1/Python-3.1.tgz#99a034cf574ea3c26412b0a0728126d7fd6ea9593d099d807a25d216ed031e6a" ldflags_dirs standard verify_py31
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.1" "https://www.python.org/ftp/python/3.1/Python-3.1.tgz#99a034cf574ea3c26412b0a0728126d7fd6ea9593d099d807a25d216ed031e6a" standard verify_py31
 install_package "setuptools-17.1.1" "https://pypi.python.org/packages/source/s/setuptools/setuptools-17.1.1.tar.gz#5bf42dbf406fd58a41029f53cffff1c90db5de1c5e0e560b5545cf2ec949c431" python
 install_package "pip-1.5.6" "https://pypi.python.org/packages/source/p/pip/pip-1.5.6.tar.gz#b1a4ae66baf21b7eb05a5e4f37c50c2706fa28ea1f8780ce8efe14dcd9f1726c" python

plugins/python-build/share/python-build/3.1.1

@@ -1,6 +1,6 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.1.1" "https://www.python.org/ftp/python/3.1.1/Python-3.1.1.tgz#5d85d7bff11c4db44920af99f64f4227c816f897f6bfa9dd8a2611165ca5f0a1" ldflags_dirs standard verify_py31
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.1.1" "https://www.python.org/ftp/python/3.1.1/Python-3.1.1.tgz#5d85d7bff11c4db44920af99f64f4227c816f897f6bfa9dd8a2611165ca5f0a1" standard verify_py31
 install_package "setuptools-17.1.1" "https://pypi.python.org/packages/source/s/setuptools/setuptools-17.1.1.tar.gz#5bf42dbf406fd58a41029f53cffff1c90db5de1c5e0e560b5545cf2ec949c431" python
 install_package "pip-1.5.6" "https://pypi.python.org/packages/source/p/pip/pip-1.5.6.tar.gz#b1a4ae66baf21b7eb05a5e4f37c50c2706fa28ea1f8780ce8efe14dcd9f1726c" python

plugins/python-build/share/python-build/3.1.2

@@ -1,6 +1,6 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.1.2" "https://www.python.org/ftp/python/3.1.2/Python-3.1.2.tgz#dffbc0561a161a4a576c6059e6990a9859a0be16ba9b5736eabe4abbb2700d1c" ldflags_dirs standard verify_py31
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.1.2" "https://www.python.org/ftp/python/3.1.2/Python-3.1.2.tgz#dffbc0561a161a4a576c6059e6990a9859a0be16ba9b5736eabe4abbb2700d1c" standard verify_py31
 install_package "setuptools-17.1.1" "https://pypi.python.org/packages/source/s/setuptools/setuptools-17.1.1.tar.gz#5bf42dbf406fd58a41029f53cffff1c90db5de1c5e0e560b5545cf2ec949c431" python
 install_package "pip-1.5.6" "https://pypi.python.org/packages/source/p/pip/pip-1.5.6.tar.gz#b1a4ae66baf21b7eb05a5e4f37c50c2706fa28ea1f8780ce8efe14dcd9f1726c" python

plugins/python-build/share/python-build/3.1.3

@@ -1,6 +1,6 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.1.3" "https://www.python.org/ftp/python/3.1.3/Python-3.1.3.tgz#6311823aeda8be6a7a2b67caaeff48abce6626c9940ba7ed81f9c978666a36bd" ldflags_dirs standard verify_py31
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.1.3" "https://www.python.org/ftp/python/3.1.3/Python-3.1.3.tgz#6311823aeda8be6a7a2b67caaeff48abce6626c9940ba7ed81f9c978666a36bd" standard verify_py31
 install_package "setuptools-17.1.1" "https://pypi.python.org/packages/source/s/setuptools/setuptools-17.1.1.tar.gz#5bf42dbf406fd58a41029f53cffff1c90db5de1c5e0e560b5545cf2ec949c431" python
 install_package "pip-1.5.6" "https://pypi.python.org/packages/source/p/pip/pip-1.5.6.tar.gz#b1a4ae66baf21b7eb05a5e4f37c50c2706fa28ea1f8780ce8efe14dcd9f1726c" python

plugins/python-build/share/python-build/3.1.4

@@ -1,6 +1,6 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.1.4" "https://www.python.org/ftp/python/3.1.4/Python-3.1.4.tgz#fadc05ea6d05360cff189944a85ecd2180bbc308784d168b350450e70bbdd846" ldflags_dirs standard verify_py31
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.1.4" "https://www.python.org/ftp/python/3.1.4/Python-3.1.4.tgz#fadc05ea6d05360cff189944a85ecd2180bbc308784d168b350450e70bbdd846" standard verify_py31
 install_package "setuptools-17.1.1" "https://pypi.python.org/packages/source/s/setuptools/setuptools-17.1.1.tar.gz#5bf42dbf406fd58a41029f53cffff1c90db5de1c5e0e560b5545cf2ec949c431" python
 install_package "pip-1.5.6" "https://pypi.python.org/packages/source/p/pip/pip-1.5.6.tar.gz#b1a4ae66baf21b7eb05a5e4f37c50c2706fa28ea1f8780ce8efe14dcd9f1726c" python

plugins/python-build/share/python-build/3.1.5

@@ -1,6 +1,6 @@
 #require_gcc
-install_package "openssl-1.0.2g" "https://www.openssl.org/source/openssl-1.0.2g.tar.gz#b784b1b3907ce39abf4098702dade6365522a253ad1552e267a9a0e89594aa33" mac_openssl --if has_broken_mac_openssl
-install_package "readline-6.3" "https://ftpmirror.gnu.org/readline/readline-6.3.tar.gz#56ba6071b9462f980c5a72ab0023893b65ba6debb4eeb475d7a563dc65cafd43" standard --if has_broken_mac_readline
-install_package "Python-3.1.5" "https://www.python.org/ftp/python/3.1.5/Python-3.1.5.tgz#d12dae6d06f52ef6bf1271db4d5b4d14b5dd39813e324314e72b648ef1bc0103" ldflags_dirs standard verify_py31
+install_package "openssl-1.0.2k" "https://www.openssl.org/source/old/1.0.2/openssl-1.0.2k.tar.gz#6b3977c61f2aedf0f96367dcfb5c6e578cf37e7b8d913b4ecb6643c3cb88d8c0" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_package "Python-3.1.5" "https://www.python.org/ftp/python/3.1.5/Python-3.1.5.tgz#d12dae6d06f52ef6bf1271db4d5b4d14b5dd39813e324314e72b648ef1bc0103" standard verify_py31
 install_package "setuptools-17.1.1" "https://pypi.python.org/packages/source/s/setuptools/setuptools-17.1.1.tar.gz#5bf42dbf406fd58a41029f53cffff1c90db5de1c5e0e560b5545cf2ec949c431" python
 install_package "pip-1.5.6" "https://pypi.python.org/packages/source/p/pip/pip-1.5.6.tar.gz#b1a4ae66baf21b7eb05a5e4f37c50c2706fa28ea1f8780ce8efe14dcd9f1726c" python

plugins/python-build/share/python-build/3.10-dev

@@ -0,0 +1,6 @@
+#require_gcc
+prefer_openssl11
+export PYTHON_BUILD_CONFIGURE_WITH_OPENSSL=1
+install_package "openssl-1.1.1k" "https://www.openssl.org/source/openssl-1.1.1k.tar.gz#892a0875b9872acd04a9fde79b1f943075d5ea162415de3047c327df33fbaee5" mac_openssl --if has_broken_mac_openssl
+install_package "readline-8.0" "https://ftpmirror.gnu.org/readline/readline-8.0.tar.gz#e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461" mac_readline --if has_broken_mac_readline
+install_git "Python-3.10-dev" "https://github.com/python/cpython" 3.10 standard verify_py310 copy_python_gdb ensurepip